• 세라미스트
• /
• 제23권1호
• /
• pp.54-88
• /
• 2020

Global effort has resulted in tremendous progress with energy harvesters that extract mechanical energy from ambient sources, convert it to electrical energy, and use it for systems such as wrist watches, mobile electronic devices, wireless sensor nodes, health monitoring, and biosensors. However, harvesting a single energy source only still pauses a great challenge in driving sustainable and maintenance-free monitoring and sensing devices. Over the last few years, research on high-performance mechanical energy harvesters at the micro and nanoscale has been directed toward the development of hybrid devices that either aim to harvest mechanical energy in addition to other types of energies simultaneously or to exploit multiple mechanisms to more effectively harvest mechanical energy. Herein, we appraise the rational designs for multiple energy harvesting, specifically state-of-the-art hybrid mechanical energy harvesters that employ multiple piezoelectric and triboelectric mechanisms to efficiently harvest mechanical energy. We identify the critical material parameters and device design criteria that lead to high-performance hybrid mechanical energy harvesters. Finally, we address the future perspectives and remaining challenges in the field.

• 전기전자학회논문지
• /
• 제13권3호
• /
• pp.39-46
• /
• 2009

무선 센서 네트워크는 무선 네트워크 기능이 있는 소형 장치로 구성된다. 실제 현장에서 센서 네트워크의 응용 영역을 증가시키기 위해서는 에너지 소모를 최소화 하는 것이 가장 큰 문제이다. 그러므로 센서 네트워크의 평가를 위해서 정확한 에너지 모델이 필요하다. 본 논문에서는 센서 네트워크의 전력 소모를 분석한다. 전력 소모 모델을 개발하기 위해서 TelosB를 기반으로 하는 상용 제품인 Kmote의 전력 특성을 측정한다. 제안한 모델로부터 PIR 센서를 이용하는 인체 감지 응용에서 건전지를 사용하는 센서 노드는 약 6.9개월의 수명을 예상할 수 있다. 이러한 결과를 바탕으로 독거노인 모니터링 시스템에 적용 가능함을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1167-1175
• /
• 2021

The process of automation and monitoring in industrial control system involves the use of many types of sensors. A programmable logic controller plays an important role in the automation of the different processes in the power plant system. The major control units are boiler for temperature and pressure, turbine for speed of motor, generator for voltage, conveyer belt for fuel. The power plant units are controlled using microcontrollers and PLCs, but FPGA can be the feasible solution. The paper focused on the design and simulation of hardware chip to monitor boiler, turbine, generator and conveyer belt. The hardware chip of the plant is designed in Xilinx Vivado Simulator 17.4 software using VHDL programming. The methodology includes VHDL code design, simulation, verification and testing on Virtex-5 FPGA hardware. The system has four independent buzzers used to indicate the status of the boiler, generator, turbine motor and conveyer belt in on/off conditions respectively. The GSM is used to display corresponding message on the mobile to know the status of the device in on/off condition. The system is very much helpful for the industries working on plant automation with FPGA hardware integration.

• 센서학회지
• /
• 제31권2호
• /
• pp.79-84
• /
• 2022

Self-powered sensors play an important role in everyday life, and they cover a wide range of topics. These sensors are meant to measure the amount of relevant motion and transform the biomechanical activities into electrical signals using triboelectric nanogenerators (TENGs) since they are sensitive to external stimuli such as pressure, temperature, wetness, and motion. The present advancement of TENGs-based self-powered wearable, implantable, and patchable sensors for healthcare monitoring, human body motion, and medication delivery systems was carefully emphasized in this study. The use of TENG technology to generate electrical energy in real-time using self-powered sensors has been the topic of considerable research among various leading scholars. TENGs have been used in a variety of applications, including biomedical and healthcare physical sensors, wearable devices, biomedical, human-machine interface, chemical and environmental monitoring, smart traffic, smart cities, robotics, and fiber and fabric sensors, among others, as efficient mechanical-to-electric energy conversion technologies. In this evaluation, the progress accomplished by TENG in several areas is extensively reviewed. There will be a discussion on the future of self-powered sensors.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권7호
• /
• pp.3064-3094
• /
• 2018

Currently, the Underwater Sensor Networks (UWSNs) is mainly an interesting area due to its ability to provide a technology to gather many valuable data from underwater environment such as tsunami monitoring sensor, military tactical application, environmental monitoring and many more. However, UWSNs is suffering from limited energy, high packet loss and the use of acoustic communication. In UWSNs most of the energy consumption is used during the forwarding of packet data from the source to the destination. Therefore, many researchers are eager to design energy efficient routing protocol to minimize energy consumption in UWSNs. As the opportunistic routing (OR) is the most promising method to be used in UWSNs, this paper focuses on the existing proposed energy efficient OR protocol in UWSNs. This paper reviews the existing proposed energy efficient OR protocol, classifying them into 3 categories namely sender-side-based, receiver-side-based and hybrid. Furthermore each of the protocols is reviewed in detail, and its advantages and disadvantages are discussed. Finally, we discuss potential future work research directions in UWSNs, especially for energy efficient OR protocol design.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.9-12
• /
• 2005

In this paper. we offer a new monitoring system that controls all of the windfar. it can also apply use general wind turbine systems and real meteorological tower. We propose a hierarchical releiable monitoring system connected by wireless communication channels between monitoring host computer and modular slave measuring subsystems. Our system has two hierarchical subsystems: slave measuring systems, and supervisory host computer. We design and implement that the slave measuring subsystems is placed in meteorological tower and wind turbines, and the supervisory host computer in safety zone, The micro-controller in slave measuring system is duplicated using cold-standby method for reliability. The host computer and slave system constructs a feedback system, with wireless communication channel between them. For monitoring and command function, the supervisory computer is implemented with a Personal Computer using graphic user interface. Consequently. we can get a reliable but economic system.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권1호
• /
• pp.165-174
• /
• 2004

본 연구에서는 에너지소산률을 활용하여 구조물의 건전도를 실시간 상에서 모니터링하는 기법을 제시하였다. 실시간 모니터링에 적합하도록 계측은 자연가진기법(NExT)이 채택되었고, 동적 분석을 위해서는 고유계 구현기법(ERA)이 채택되어 실시간 데이터의 분석이 가능하도록 하였다. 이들 데이터로부터 계산된 구조물의 댐핑과 고유치만을 사용하여 에너지소산률을 계산하고, 이들 값으로부터 구조물의 손상도를 평가하는 알고리즘(에너지소산법)을 개발하였다. 본 연구에서 제안된 에너지소산법은 기존의 방법(고유치변화법과 모드변화법(MAC))과 비교하여 유용성이 입증되었다. 특히 에너지소산법은 실시간 모니터링에 중요한 계측시간과 데이터의 량을 줄일 수 있었고, 자연가진을 이용하여 전체적인 구조물의 거동을 파악하기에 용이하였으며 구조물의 손상 유무를 판단하는 효과적 기법으로 입증되었다.

• 방사성폐기물학회지
• /
• 제17권2호
• /
• pp.245-261
• /
• 2019

원자력이용시설에서 유출된 방사성 오염물질은 지표수나 지하수의 유동에 따라 이동할 수 있다. 이 중에 지표수에 의해 이동하는 오염물질은 비교적 감시가 용이하지만, 지하수를 따라 이동하는 오염물질은 대상 매질에서의 지하수흐름에 대한 정보를 알아야 하므로 감시가 매우 어렵다. 그러므로 지하수에 의한 오염물질의 이동을 규명하기 위해서 지질환경의 특성화가 선행되어야 한다. 본 연구에서는 연구부지에 건설된 가상의 원자력이용시설에 대한 감시공의 위치를 결정하고, 감시공에서의 심도별 감시 구간을 선정하는 방법론을 제안하였다. 감시공의 위치를 결정하기 위해 지하수유동 모델링을 수행하였고, 그 결과 지하수 흐름의 하류 지역에 감시공의 위치를 선정하였으며, 감시공에서 수행한 현장조사 결과를 바탕으로 비교적 지하수의 흐름이 빠른 구간을 대상으로 감시 구간을 선정하였다. 본 연구를 통해 개발된 모니터링 방법론은 국내 원자력 발전소를 포함한 원자력이용시설 뿐만 아니라, 유류비축시설의 오염물질, 농업 관련 지하수 오염의 감시 등 다양한 분야에서 잠재적으로 지하수에 유입될 수 있는 오염물질을 조기 감시하는 데에 활용할 수 있을 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1765-1767
• /
• 2005

This paper proposes central monitoring system(PVCMS) based on a TCP/IP network for effective integrating management about photovoltaic systems. We don't gain confidence the result of production simulation, because the output of PV system have many various environmental change factor. So if we can obtain real operated data about each sites and system types to use PVCMS, we can define the environment change factor to compare with simulation data. And this paper try to access about total management and data analysis methods of renewable energy through results analysis to synthesize of the operation.

• Journal of Information Processing Systems
• /
• 제13권5호
• /
• pp.1320-1330
• /
• 2017

Wireless sensor networks for forest monitoring are typically deployed in fields in which manual intervention cannot be easily accessed. An interesting approach to extending the lifetime of sensor nodes is the use of energy harvested from the environment. Design constraints are application-dependent and based on the monitored environment in which the energy harvesting takes place. To reduce energy consumption, we designed a power management scheme that combines dynamic duty cycle scheduling at the network layer to plan node duty time. The dynamic duty cycle scheduling is realized based on a tier structure in which the network is concentrically organized around the sink node. In addition, the multi-paths preserved in the tier structure can be used to deliver residual packets when a path failure occurs. Experimental results show that the proposed method has a better performance.