• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.6
• /
• pp.717-721
• /
• 2010

In general, wireless MAC uses the ACK for reliability. Meanwhile, in wireless sensor network, data is delivered periodically and redundantly. In these situations, every ACK transmission causes the reliability flexible applications to waste some energy. IEEE 802.15.4 developed for energy efficiency has the option of using ACK or not, but there are no researches exploiting this peculiarity. In this paper, we proposed the selective unacknowledged transmission satisfying some requirements (e.g., end-to-end delivery) by removing the ACK when frames are delivered well and using the ACK when frames are delivered poorly. Also, we performed several evaluations exploiting the NS2 simulator.

• Journal of Internet Computing and Services
• /
• v.16 no.5
• /
• pp.11-17
• /
• 2015

In the general transmission power control model that is used for wearable sensor systems, if RSSI value gets out of the Target RSSI Margin, then the sink node finds new transmission power by using TPC(Transmission Power Control) Algorithm. At this time, the sink node sends the control packet to the sensor node for delivering the newly calculated transmission power. However, when the wireless network channel condition is poor, even it is consuming a lot of control packets, the sink node could not find an appropriate transmission power so it only waste of energy. Therefore, we proposed a new control packet transmission decision method that the sink node changes the transmission power when the wireless network channel condition is stabilized. It makes waste of energy decline. In this paper, we apply control packet transmission decision method to Binary TPC algorithms and analyze the results to evaluate the proposed method. We propose three methods that judge the state of wireless network channel. We experiment that methods and analysis the results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.450-457
• /
• 2008

One of very essential techniques for enlarging lifetime of energy-constrained wireless personal area network (WPAN) devices is energy-efficient transmission technique. If the WPAN is operated based on a TDMA protocol, the satisfaction of QoS requirements at each allocated time slot is another important factor to be considered. We therefore propose an energy-efficient transmission scheme for WPANs operating with a contention-free medium access protocol such as TDMA, as well as satisfying QoS requirement. The proposed algorithm determines the optimum combination of transmit power, physical data rate and fragment size required to simultaneously minimize the energy consumption and satisfy the required QoS in each assigned time duration, considering all the possible energy-minimization related parameters. The proposed algorithm demonstrated the improved performance results in terms of throughput and energy consumption via computer simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.670-678
• /
• 2004

In oriental medicine, meridian is pathway of bio-energy, and basic an object of diagnosis/therapy. But, in western medicine, meridian has been accepted as action pathway of nerve-endocrine-immune system. Acupuncture effect has been regarded as not effect by transmission of bio-energy but action or response by stimulation. In this paper, when an acupuncturist's bio-energy is passed on(non-insulation) and when is not(insulation), we analysed electric potential on meridian/non-meridian to verify effect of acupuncture therapy. In the results, when bio-energy isn't passed on, bio-potential is reacted to only the first of 4 times acupuncture operating. But when bio-energy is passed on, it is reacted to 4 times, and potential on meridian is higher than that of on non-meridian. Electric potential for same acupuncture operating is different on non/meridians, which implies that physiological construction and bio-energy transmission material is different respectively. When is extracting acupuncture method, potential is higher than that of injection one. It implies that extracting method is more effect than injecting one, in aspect of acupuncture therapy effect. Therefore, acupuncture therapy effect is verified as effect of response by acupuncturist's bio-energy transmission rather than that by only acupuncture stimulus.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.311-318
• /
• 1998

In this paper, the power flow analysis(PFA) method is applied to the prediction of the vibrational energy density and intensity of coupled co-planar plates. To cover the energy transmission and reflection at the joint of the plates, the wave transmission approach is introduced with the assumption that all the incident waves are normal to the joint. By changing the frequency ranges and internal loss factors, we have obtained the PFA results, and compared them with the analytical exact solutions.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.445-447
• /
• 2007

This paper is seeing as one big cause that reduce Life Time of sensor node become soft if BackOff Time is prolonged in CDMA/CA of competition way that consist at data transmission of each sensor nodes base sensor network environment. So solution method uses GTS, wish to reduce competition Node's, and minimise data transmission delay.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.881-885
• /
• 2008

Wireless energy transmission system to a Micro Aerial Vehicle is now under development. A 5.8 GHz microwave phased array antenna and rectenna array receiver have been developed. An electric motor on a circling MAV model was driven by the transmitted power. In addition, 140GHz millimeter-waves of up to 1MW was beamed to a "Microwave Rocket" and its thrusting has been successfully demonstrated.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.167.2-167.2
• /
• 2011

Motions in nature, for example ocean wave, has been playing a significant role for generating electricity production in our modern life. This paper presents an innovative approach for electric power conversion of the vast ocean wave energy. Here, a floating-buoy wave energy converter (WEC) using hydrostatic transmission (HST), which is shortened as HSTWEC, is proposed and designed to enhance the wave energy harvesting task during all wave fluctuations. In this HSTWEC structure, the power take-off system (PTO) is a combination of the designed HST circuit and an electric generator to convert mechanical energy generated by ocean wave into electrical energy. Several design concepts of the HSTWEC have been considered in this study for an adequate investigation. Modeling and simulations using MATLAB/Simulink and AMESim are then carried out to evaluate these design concepts to find out the best solution. In addition, an adaptive controller is designed for improving the HSTWEC performance. The effectiveness of the proposed HSTWEC control system is finally proved by numerical simulations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.9
• /
• pp.2399-2418
• /
• 2023

The paper focuses on investigating secure transmission in wireless powered communication networks (WPCN) that involve multiple energy-constrained relays and one energy-constrained source. The energy is harvested from a power beacon (PB) while operating in the presence of a passive eavesdropper. The study primarily aims to achieve energy-efficient secure communications by examining the impact of channel estimation on the secrecy performance of WPCN under both perfect and imperfect CSI scenarios. To obtain practical insights on improving security and energy efficiency, we propose closed-form expressions for secrecy outage probability (SOP) under the linear energy harvesting (LEH) model of WPCN. Furthermore, we suggest a search method to optimize the secure energy efficiency (SEE) with limited power from PB. The research emphasizes the significance of channel estimation in maintaining the desired performance levels in WPCN in real-world applications. The theoretical results are validated through simulations to ensure their accuracy and reliability.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.884-892
• /
• 2006

A friction-type reinforcing member(FRM) is proposed for the purpose of upgrading wind resistant performance of a transmission tower and verified through cyclic loading tests. First, suitable install scheme of the FRM is investigated through numerical analysis. Main-post-reinforcing type and X-brace type installation schemes are examined, and numerical analysis shows that the former is more effective due to the vertical cantilever type behavior of the transmission tower. Based on this result, two types of the FRM's, dissipating energy in slotted belted connections, are proposed. The one utilizes the relative displacement between the FRM and the main post, and the other utilizes that between the separated angles consisting of the FRM as a slip deformation of the slotted bolted connection. Proposed FRM's are installed on each main post of the 1/2 scale substructure models of an actual transmission tower body. From cyclic loading tests, the latter type of the proposed FRM's dissipates energy more effectively and its slip load is controlled by applied torque well, and shares considerable amount of the axial force in the main post.