• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.365-368
• /
• 2008

This experiment is significant because we can provide information by measuring effect of energy saving for whom plan to install a geothermal heat & cooling system. The result shows geothemal system can save about 50% of energy(heating : 35%, cooling : 60%) and we verified that when using curtain can help saving $4{\sim}12%$ of energy additionally

• JOURNAL OF ELECTRICAL WORLD
• /
• s.358
• /
• pp.16-17
• /
• 2006

오스트레일리아 남동부의 빅토리아 주는 지난 6월 5일 가정용 민생부문 전력수요를 대상으로 한, 에너지 소비량 및 온실가스 배출량의 삭감을 목표로 하는 대규모의 에너지절약 캠페인‘You have the Power, Save Energy’를 전개한다고 발표하였다.

• KIEAE Journal
• /
• v.16 no.6
• /
• pp.123-128
• /
• 2016

Purpose: In order to save the energy consumption of buildings, buildings have been constructed with high performance insulation or airtightness. However, high performance insulation or air tightness has led to a poor indoor air quality. Therefore, HRV(Heat Recovery Ventilator) has received attention to save the energy consumption and insure a good air quality. Because existing research is almost about the performance of HRV in residential buildings, This study analyzed the effect of HRV on cooling energy consumption in commercial office building. Method: This study was proceeded at commercial office building in In-cheon. In order to evaluate the energy consumption of HRV, this study proposed two methods: estimating energy consumption of the room installed AHU(Air Handling Unit) system; estimating energy consumption of the room installed HRV system. Therefore, comparison of two methods was proceeded to evaluate energy performance of each method. Result: As the result of comparison between rooms installed AHU and HRV, the experiment showed that energy consumption of the room installed HRV system is about 22% less than the room of AHU system. This conclusion is considered because the room installed HRV system have maintained temperature well at set point temperature $26^{\circ}C$.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.1
• /
• pp.14-23
• /
• 2015

Although research and technology developments have recently increased to save lighting energy within buildings, such research and technology development are judged to be unsuitable for energy savings since they are limited in the sense that the application of the technology is fragmented. This study proposes a user and location awareness technology applied to dimming lighting control system and verified the effectiveness of energy savings by building a test bed. The results were as follows : 1) This study suggested a user and location awareness technology applied to dimming lighting control system. 2) The system shows 96.6% and 82.8% energy saving rates, respectively, on the basis of one user, compared to an on/off lighting control and the user and location awareness technology applied to on/off lighting control system. 3) The energy consumption of the user and location awareness technology applied to on/off lighting control system and the user and location awareness technology applied to dimming lighting control system increased to 96.6%, 88.3%, and 59.6% and 82.8%, 85.0%, 51.5%, respectively, on the basis of one, two, and three users, compared to the on/off lighting control system. This study confirmed the energy saving performance of the user and location awareness technology applied to the dimming lighting control system through performance evaluation. In this regard, further study needs to be undertaken to evaluate the performance at night time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.187-192
• /
• 2017

In dense deployments of sensor nodes in Wireless Sensor Networks, the MAC protocol has challenges to solve problems such as reducing delivery delay and reducing energy consumption. To solve these problems lots of protocols are suggested. This paper proposed a sensor nodes' residual energy based wake-up control mechanism, in which each node decides whether it wakes up or stays in sleep mode to save energy consumption by reducing unnecessary idle listening. The main idea of the wake-up control mechanism is to save node's energy consumption. The proposed wake-up control mechanism is based on the RI-MAC protocol, which is one of the receiver-initiated MAC protocols. A receiver node in the proposed mechanism periodically wakes up and broadcasts a beacon signal based on the energy status of the node. A receiver node also adjusts wake-up period based on the traffics. Results have shown that the proposed MAC protocol outperformed RI-MAC protocol in the terms of energy consumption.

• Journal of Energy Engineering
• /
• v.19 no.1
• /
• pp.51-56
• /
• 2010

Due to increase in oil price unstableness and earth warming, energy saving has been one of the most important global issues. We report a 6 sigma project that was carried out to save electrical energy in a university campus. DMAIC, the five-phase process of 6 sigma, was applied for the energy saving campaign. This paper proposes a simple method to quantify the sigma level of the electrical energy saving status and various activities to change the consciousness of all the university members. Results were very satisfied. The 6 sigma project saved about 10% of the total electrical consumption. This is approximately 50 million won a year. The success of the 6 sigma project served as a momentum to promote "Green Scholarship" that has become the center of public interest. Also, we have valuable experiences in the 6 sigma training that shows the university campus can be successfully used as a good place for the actual 6 sigma training.

• KIEAE Journal
• /
• v.15 no.5
• /
• pp.13-20
• /
• 2015

Purpose: In order to upgrade the energy performance of existing building, energy audit stage should be implemented first because it is useful method to find where the problems occur and know how much time and cost consumption for retrofit. In overseas researches, three levels of audit is proposed whereas there are no standards for audit in Korea. Besides, most studies use dynamic simulation in detail like audit level 3 even though the level 2 can save time and cost than level 3. Thus, this paper focused on audit level 2 and proposed the audit method with the simple linear regression analysis model. Method: Two parameters were considered for the simple regression analysis, which were the monthly electric use and the mean outdoor temperature data. The former is a dependent variable and the latter is a independent variable, and the building's energy performance profile was estimated from the regression analysis method. In this analysis, we found the abnormal point in cooling season and the more detailed analysis were conducted about the three heat source equipments. Result: Comparing with real and predicted models, the total consumption of predicted model was higher than real value as 23,608 kWh but it was the results that was reflected the compulsory control in 2013. Consequently, it was analyzed that the revised model could save the cooling energy as well as reduce peak electric use than before.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1146_1147
• /
• 2009

This experiment is significant because we can provide information by measuring effect of energy saving for whom plan to install a geothermal heat & cooling system. The result shows geothemal system can save about 50% of energy(heating : 35%, cooling : 60%) and we verified that when using curtain can help saving 4~12% of energy additionally.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.1101-1116
• /
• 1996

It is desirable to use the renewable energy for the greenhouse heating in winter season, it makes possible not only to save fossil fuel and conserve green farm environment but also to promote the quality of agricultural products and reduce the agricultural production cost. In this study the heat pump system was developed to use the natural energy as thermal energy resource for the thermal environment control of the greenhouse.

• Journal of Energy Engineering
• /
• v.27 no.2
• /
• pp.81-88
• /
• 2018

Every day a huge amount of paper is being used, most of them are thrown after using. This directly impacts on the environment. Therefore, waste paper management is necessity to protect the environment from its annihilation and pollution. Paper recycling products consist of printing paper, newspaper, corrugated containers, magazine paper and so on. Reuse waste paper will reduce the consumption of wood and virgin pulp as recycling one ton of newsprint can save approximately 1 ton of wood, meanwhile recycling 1 ton of printing paper can save more than 2 tons of wood. With increasing recycling rates, lower quality paper fractions may be included. Thus the selection of a paper recycling technology is a crucial first design consideration. The paper recycling must be accompanied by appropriate technology to manage a huge volume of wastepaper. The specific objectives of this study were as follows: (1) comprehensive literature reviews of paper production and consumption, (2) figure out about paper recovery and utilization, (3) investigate the paper recycling in the sustainable times, (4) introduce eco-friendly recycling technology to paper industry.