• 제목/요약/키워드: Energy Save

검색결과 800건 처리시간 0.035초

스마트 그리드 환경에서 시스템 ID를 이용한 지그비 인증 프로토콜에 관한 연구 (A study on Zigbee Authentication Protocol Using System IDs in Environments of Smart Grid)

  • 김경목;임송빈
    • 한국컴퓨터정보학회논문지
    • /
    • 제16권4호
    • /
    • pp.101-110
    • /
    • 2011
  • 스마트 그리드 네트워크(Smart Grid Networks)는 기존의 전력망에 정보기술(IT)을 접목하여 전력 공급자와 소비자가 양방향으로 정보를 교환함으로써 에너지 효율을 최적화하는 차세대 지능형 전력망이다. 고압 전력망과 IT 영역에서 응용되고 있는 스마트 그리드 네트워크(Smart Grid Networks)는 정보의 도청이나, 비정상적 패킷의 유통, 메시지의 재사용등 데이터의 위 변조와같은외부의공격에쉽게노출되는환경에서동작함으로보안은필수적으로갖추어져야 하는 중요한 기능이다. 저전력, 초소형 저비용 장점을 갖는 Zigbee는 스마트 그리드 네트워크를 구현하는 최적의 기술로 주목 받고 있다. 그러나 Zigbee 보안 시스템에는 심각한 문제점들을 가지고 있다. 본 논문에서는 스마트 그리드의 Zigbee 보안 시스템이 가지고 있는 문제점들을 자세히 분석하고, 이를 해결하여 스마트 그리드에 적합한 보안 프로토콜을 새롭게 제안하고 그 효율성을 비교 분석한다.

Prediction models of compressive strength and UPV of recycled material cement mortar

  • Wang, Chien-Chih;Wang, Her-Yung;Chang, Shu-Chuan
    • Computers and Concrete
    • /
    • 제19권4호
    • /
    • pp.419-427
    • /
    • 2017
  • With the rising global environmental awareness on energy saving and carbon reduction, as well as the environmental transition and natural disasters resulted from the greenhouse effect, waste resources should be efficiently used to save environmental space and achieve environmental protection principle of "sustainable development and recycling". This study used recycled cement mortar and adopted the volumetric method for experimental design, which replaced cement (0%, 10%, 20%, 30%) with recycled materials (fly ash, slag, glass powder) to test compressive strength and ultrasonic pulse velocity (UPV). The hyperbolic function for nonlinear multivariate regression analysis was used to build prediction models, in order to study the effect of different recycled material addition levels (the function of $R_m$(F, S, G) was used and be a representative of the content of recycled materials, such as fly ash, slag and glass) on the compressive strength and UPV of cement mortar. The calculated results are in accordance with laboratory-measured data, which are the mortar compressive strength and UPV of various mix proportions. From the comparison between the prediction analysis values and test results, the coefficient of determination $R^2$ and MAPE (mean absolute percentage error) value of compressive strength are 0.970-0.988 and 5.57-8.84%, respectively. Furthermore, the $R^2$ and MAPE values for UPV are 0.960-0.987 and 1.52-1.74%, respectively. All of the $R^2$ and MAPE values are closely to 1.0 and less than 10%, respectively. Thus, the prediction models established in this study have excellent predictive ability of compressive strength and UPV for recycled materials applied in cement mortar.

식품의 가열살균공정 자동화 시스템의 개발 (A Control System for Automization of Food Sterilizing Process)

  • 안희우;조현덕;한봉호;김상봉
    • 한국수산과학회지
    • /
    • 제25권6호
    • /
    • pp.511-519
    • /
    • 1992
  • 식품의 가열살균공정에 있어서 자동화는 에너지 소비의 성력화와 품질과의 관계 최적화를 위한 필수조건 중의 하나이다. 이를 위하여 마이크로컴퓨터를 이음한 자동화 시스템을 개발하였다. 시스템의 성능 및 정확도는 고형식품으로 사용한 명태 고기풀의 가열살균과정에서의 열침투곡선과 열확산도의 정확도로써 검토하였다. 자동화 시스템을 이용하여 측정한 명태 고기풀의 열침투곡선은 전형적인 고형식품의 열침투곡선을 나타내었다. 열침투곡선으로 부터 계산된 열확산도의 경우, 일정 살균온도에서는 다른 조건의 변화에 관계없이 일정한 값을 나타내었다. 가열살균온도를 변화시켜 구한 열확산도를 문헌상에 보고된 열확산도 추정식으로 구한 값과 비교하였을 때, 큰 차이를 보이지 않았으며 그 차이는 $\pm10.0\%$이내였다.

  • PDF

Polyester 상에서 Sputter 증착되는 고 밀도 은경 박막의 물리적 특성에 미치는 공정조건 변화의 효과 (The Effect of Various Process Conditions on the Physical Properties of Dense Silver Films, Prepared by Using Sputter Deposition on Polyester Substrate)

  • 리의재;황태수
    • 한국재료학회지
    • /
    • 제9권7호
    • /
    • pp.707-714
    • /
    • 1999
  • 형광등으로 사용되는 전기 에너지의 40%를 절약할 수 있는 방법으로서 그 반사값을 특수 은 반사박막으로 처리하여 고효율 및 내구성을 갖는 기술이 최근에 알려지고 있다. 이 박막들은 sputtering법을 이용한 것으로 주로 미국에서 생산되어지고 있다. 한편. evaporation 법으로 제작된 은 박막들은 일반적으로 반사효율에는 별문제가 없으나 부착력이 떨어지는 단점이 있다. 우리는 수년간 polyester를 기판으로 하고 몇가지 PVB 방법을 동원하여 고 반사율 및 부착력을 갖는 은경 박막을 확보하기 위해 연구를 해왔다. 그 결과, evaporation 법으로 제작된 은 박막은 96.4%의 반사율을 보이나 부착력은 $12 Kg/\textrm{cm}^2$에 불과함을 확인하였고. sputter 법으로 제작한 시편들의 반사율은 96.3 %로 비슷하였으나 부착력이 /$20 Kg\textrm{cm}^2$로 거의 두배로 뛰어올라 sputter법의 공정조건이 그 결과박막들의 물리적 특성에 미치는 긍정적 영향을 확인할 수 있었다. X-선 회절 분석결과 sputter의 경우에 (111)면이 우선성장함을 알 수 있었고, 시편의 단면으로부터 관찰된 치밀한 columnar 구조가 부착력을 향상시키고 있음이 확인되었다.

  • PDF

혼합형 채광조절장치가 실내공간의 휘도분포에 미치는 영향에 관한 Mockup 실험평가 (Luminance Performance of a Room with Light Guide and Blind Systems by Mockup Experiments)

  • 신화영;안현태;김정태
    • KIEAE Journal
    • /
    • 제7권1호
    • /
    • pp.65-72
    • /
    • 2007
  • As ecological design elements, daylighting can be applied to provide adequate illumination on visual tasks to create an attractive visual environment and to save electrical energy. Daylighting control systems reject direct sunlight and penetrate it onto the ceiling or to deep into the room. This study aims to evaluate the luminance environment of sloped light guide with automated venetian blind systems according to sun angle changes. For evaluation, a mock-up model was used and the south facing side-window mounted between the clerestory window and the view window. To assess luminance performance, 3 view points of luminance were monitored. As results, the conventional and lightshelves show ideal luminance ratio between workplane and surroundings(3:1) and workplane and darkness area(2:1) due to total ratio of surroundings and darkness area has lower ratio than workplane. Compared to the lightshelves window, conventional window shows unrelieved effect in between the workplane and brightness area(1:5). It means that there has low deviation according to the required standards. Also, compared to the ratio between the brightness area and darkness area(2~6:1) conventional window with high deviation(10~20:1) provide discomfort glare due to the excessively strong contrast, while lightshelves window shows a required luminance ratio that provide a three-dimensional effect to occupants. Therefore, luminance distribution indicate that application of a lightshelves and blinds not only has a significantly positive effect but also offers higher luminance quality in a daylit room

이동 애드혹 네트워크에서 라우팅 방식과 무관한 이기적인 노드 관리 방안 (A Routing Independent Selfish Node Management Scheme for Mobile Ad Hoc Networks)

  • 안상현;유영환;이재훈
    • 한국정보과학회논문지:정보통신
    • /
    • 제33권2호
    • /
    • pp.149-155
    • /
    • 2006
  • 현재 이동 애드혹 네트워크(mobile ad hoc network; MANET)의 라우팅 프로토콜들은 모든 노드들이 자발적으로 다른 노드들로부터의 패킷을 포워딩하는데 참석한다고 가정하고 있다. 그러나 하나의 MANET이 여러 관리 기구에 속한 노드들로 구성될 경우, 이동 노드가 자신의 에너지를 절약하기 위해서 다른 노드들로부터의 패킷을 고의적으로 포워딩하지 않을 수도 있으며 이로 인해 네트워크 성능이 저하될 수 있다. 본 논문에서는 노드가 자발적으로 패킷 포워딩에 참여하도록 하는 PIFA(Protocol-Independent Fairness Algorithm)라는 크레딧 지불(credit payment) 기법을 제안한다 DSR과 같은 소스 라우팅 (source routing) 방식에서만 사용할 수 있었던 기존 방법들과는 달리 PIFA는 기반이 되는 라우팅 프로토콜의 종류와 무관하게 사용될 수 있다. 시뮬레이션을 통해, PIFA가 이기적인(selfish) 노드로 하여금 패킷 포워딩에 참여하게 함으로써 네트워크 성능이 저하되지 않게 함을 알았다.

Development of Autonomous Sprayer Considering Tracking Performance on Geometrical Complexity of Ground in Greenhouse

  • Lee, Dong Hoon;Lee, Kyou Seung;Cho, Yong Jin;Lee, Je Yong;Chung, Sun-Ok
    • Journal of Biosystems Engineering
    • /
    • 제37권5호
    • /
    • pp.287-295
    • /
    • 2012
  • Purpose: Some of the most representative approaches are to apply next generation technologies to save energy consumption, fully automated control system to appropriately maintain environmental conditions, and autonomous assistance system to reduce labor load and ensure operator's safety. Nevertheless, improvement of upcoming method for soil cultured greenhouse has not been sufficiently achieved. Geometrical complexity of ground in protected crop cultivation might be one of the most dominant factors in design of autonomous vehicle. While there is a practical solution fairly enough to promise an accurate travelling, such as autonomous sprayer guided by rail or induction coil, for various reasons including the limitation of producer's budget, the previously developed sprayer has not been widely distributed to market. Methods: In this study, we developed an autonomous sprayer considering travelling performance on geometrical complexity of ground in soil cultured greenhouse. To maintain a stable travelling and to acquire a real time feedback, common wire with 80 mm thick and body frame and sprayer boom. To evaluate performance of the prototype, tracking performance, climbing performance and spraying boom's uniform leveling performance were individually evaluated by corresponding experimental tests. Results: The autonomous guidance system was proved to be sufficiently suitable for accurate linear traveling with RMS as lower than approximately 10 cm from designated path. Also the prototype could climb $10^{\circ}$ of ground's slope angle with 40 kg of water weight. Uniform leveling of spraying boom was successfully performed within $0.5^{\circ}$ of sprayer boom's slope. Conclusions: Considering more complex pathways and coarse ground conditions, evaluations and improvements of the prototype should be performed for promising reliability to commercialization.

스마트 워터 그리드 내에서 워터 블렌딩을 고려한 역삼투 해수담수화 플랜트 설계 (Design for seawater reverse osmosis plant using water blending in smart water grid)

  • 이홍주;박한배;우달식;김수한
    • 상하수도학회지
    • /
    • 제29권1호
    • /
    • pp.89-96
    • /
    • 2015
  • Smart water grid is a water network with communication to save water and energy using various water resources. In smart water grid, water product from the various sources can be blended to be supplied to end-users. The product water blending was reported by literatures while feed water blending has been rarely reported so far. In this work, a commercial reverse osmosis (RO) system design software provided by a membrane manufacturer was used to elucidate the effect of feed water blending on the performance of seawater reverse osmosis (SWRO) plant. Fresh water from exisiting water resource was assumed to be blended to seawater to decrease salt concentration of the RO feed water. The feed water blending can simplify the RO system from double to single pass and decrease seawater intake amount, the unit prices of the RO system components including high pressure pump, and operation risk. Due to the increase in RO plant capacity with the feed water blending, however, the RO membrane area and total power consumption increase at higher water blending rates. Therefore, a specific benefit-cost analysis should be carried out to apply the feed water blending to SWRO plants.

Tier-based Proactive Path Selection Mode for Wireless Mesh Networks

  • Fu-Quan, Zhang;Joe, In-Whee;Park, Yong-Jin
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제6권5호
    • /
    • pp.1303-1315
    • /
    • 2012
  • In the draft of the IEEE 802.11s standard, a tree topology is established by the proactive tree-building mode of the Hybrid Wireless Mesh Protocol (HWMP). It is used for cases in which the root station (e.g., gateway) is an end point of the majority of the data connections. In the tree topology, the root or central stations (e.g., parent stations) are connected to the other stations (e.g., leaves) that are one level lower than the central station. Such mesh stations are likely to suffer heavily from contention in bottleneck links when the network has a high traffic load. Moreover, the dependence of the network on such stations is a point of vulnerability. A failure of the central station (e.g., a crash or simply going into sleep mode to save energy) can cripple the whole network in the tree topology. This causes performance degradation for end-to-end transmissions. In a connected mesh topology where the stations having two or more radio links between them are connected in such a way that if a failure subsists in any of the links, the other link could provide the redundancy to the network. We propose a scheme to utilize this characteristic by organizing the network into concentric tiers around the root mesh station. The tier structure facilitates path recovery and congestion control. The resulting mode is referred to as Tier-based Proactive Path Selection Mode (TPPSM). The performance of TPPSM is compared with the proactive tree mode of HWMP. Simulation results show that TPPSM has better performance.

강제환기식 돈사의 환기 효율성 분석을 위한 CFD 모델 개발 (Development of a CFD Model to Study Ventilation Efficiency of Mechanically Ventilated Pig House)

  • 서일환;이인복;홍세운;황현섭;;유재인;권경석;하태환;김현태
    • 한국농공학회논문집
    • /
    • 제50권1호
    • /
    • pp.25-37
    • /
    • 2008
  • When livestock facilities in Korea have been changed larger and denser, rearing conditions have been getting worse and the productivity of animal production have been decreased. Especially in the cold season, the minimized ventilation has generally been operated to save energy cost in Korea resulting in very poor environmental condition and high mortality. While the stability, suitability, and uniformity of the rearing condition are the most important for high productivity, the ventilation configuration is the most important to improve the rearing condition seasonally. But, it is so difficult to analyze the internal air flow and the environmental factors by conducting only field experiment because the weather condition is very unpredictable and unstable as well as the structural specification can not be easily changed by the researchers considering cost and labor. Accordingly, an aerodynamic computer simulation was adopted to this study to overcome the weakness of conducting field experiment and study the aerodynamic itself. It has been supposed that the airflow is the main mechanism of heat, mass, and momentum transfers. To make the simulation model accurately and actually, simplified pig models were also developed. The accuracy of the CFD simulation model was enhanced by 4.4 % of errors compared with the data collected from field experiments. In this paper, using the verified CFD model, the CFD computed internal rearing condition of the mechanically ventilated pig house were analyzed quantitatively as well as qualitatively. Later, this developed model will be computed time-dependently to effectively analyze the seasonal ventilation efficiency more practically and extensively with tracer gas decay theory.