• 한국위성정보통신학회논문지
• /
• 제9권2호
• /
• pp.69-73
• /
• 2014

최근 전 세계적으로 에너지에 대한 관심이 증가하고 있으며, 에너지의 효과적인 운용과 에너지 세이빙을 위한 IT 기술개발의 필요성이 대두되고 있다. LED는 저전력 에너지를 사용함으로써 전 세계적으로 효율적인 에너지 사용을 위한 다양한 연구가 진행되고 있다. 우리나라에서도 국내 전력 사용량의 20~30%에 해당하는 조명용 에너지를 절약하기 위해 각종 센서를 사용하는 조명 제어에 관련된 연구들이 진행되고 있다. 즉 차세대 에너지 광원으로 LED에 주목하기 시작하였고, 본 논문에서는 이러한 LED를 아두이노와 초음파 센서를 제어하여 에너지 관리 효율을 극대화 하고자 한다. 논문에서는 사용자가 직접 별도의 컨트롤러를 조작해 LED조명을 제어를 하는 것이 아니라, 인체감지인식을 통해 LED조명 on/off를 제어연구를 실험하고 검증하였다. 또한 본 논문에서 개발한 인터페이스를 이용하면 에너지 관리 효율을 극대화 시켜 이를 동반한 상업화 및 효율성을 확대를 꾀할 수 있다.

• Smart Structures and Systems
• /
• 제13권3호
• /
• pp.435-451
• /
• 2014

In this paper, we investigate the vibration control of multimodal structures and present an efficient control law that requires less energy supply than active strategies. This strategy is called modal global semi-active control and is designed to work as effectively as the active control and consume less power which represents its major limitation. The proposed law is based on an energetic management of the optimal law such that the controller follows this latter only if there is sufficient energy which will be extracted directly from the system vibrations itself. The control algorithm is presented and validated for a cantilever beam structure subjected to external perturbations. Comparisons between the proposed law performances and those obtained by independent modal space control (IMSC) and semi-active control schemes are offered.

• 한국인터넷방송통신학회논문지
• /
• 제14권6호
• /
• pp.85-91
• /
• 2014

현재 능동적인 조명제어와 관리기술이 연구되어 상용화되고 있다. 아파트 단지 등 복합 지능공간에서 유비쿼터스 서비스 기술을 응용하여 다중 지능 공간을 관리하는 시스템을 구축하여 활용하면, 에너지 사용 관련 의사결정을 지원 하고, 에너지의 효율을 높이며 생활의 안락함을 최적의 상태로 유지할 수 있을 것이다. 이를 위해서 지그비 메쉬망을 통해 수집된 전력 데이터를 가공하고, 상황에 적합한 서비스를 검색하기 위한 기능을 제공하는 분산형 자율 제어 미들웨어 및 에너지 관리 시스템이 필요하다. 본 논문에서는 지능 공간에서 유비쿼터스 서비스 제공을 위한 홈 서버 등의 플랫폼에 기반한 소프트웨어로 탑재되어 양방향 통신이 가능하고 다양한 무선 센서노드와 제어 네트워크, 에너지 디스플레이 디바이스 등을 활용하여 에너지 사용 관련 의사결정을 지원하는 분산형 자율제어 미들웨어 및 실시간 스마트 에너지 정보시스템(DDLEMS)을 설계 한다.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권1호
• /
• pp.121-125
• /
• 2016

KEPCO has completed the installation and demonstration of a 52 MW battery energy storage system (BESS) for frequency regulation. Especially, 24 MW BESS is for Automatic Generation Control (AGC) in Shin-Yongin substation. Recently, KEPCO Research Institute has operated it connected to EMS of KPX. This paper discussed the operation strategy of EMS through a study on using 24 MW BESS in AGC operation and propose the improvement of AGC target. It is expected that this paper helps a safe and reliable operation and control of ESS for AGC through its continuous update.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.48-53
• /
• 2008

The performances of the building service equipment relay on the individual superintendent's share for the assessment of performance, fault detection, deterioration diagnosis of the building service equipment. A major use of building energy management system(BEMS) is for monitoring plant and building's energy consumption. National building management system (N-BMS) presented in this study links buildings into a network group in order to monitor and control the buildings. How to construct the N-BMS was considered to save energy resource and to conserve performance of building service equipment. The FEMIS, facility, energy/environmental management & information system, for building service offer management process integrated with BAS, FMS and EMS and so on.

• 품질경영학회지
• /
• 제24권2호
• /
• pp.113-127
• /
• 1996

A various quality data are produced during nuclear fuel fabrication. In order to control quality data efficiently, Computerization of Quality Information System(QIS) using personal computer was established. Database control software and analysis software were developed for QIS. QIS was applied the fuel manufacturing and quality inspection. Quality trend analysis, process control, process capability and quality history docket for nuclear fuel manufacturing were performed by QIS. Through the Quality Information System, quality assurance, quality control, process control and manufacturing engineering were performed efficiently in nuclear fuel manufacturing.

• 전기학회논문지
• /
• 제56권10호
• /
• pp.1763-1769
• /
• 2007

To improve the cycle-life and efficiency of an energy storage system for HEV, a dynamic control system consisted of a switch between a battery and an ultracapacitor module is proposed, which is appropriate for mild hybrid vehicle with 42V power net. The switch can be controlled based on the status of the battery and the ultracapacitor module, and a control algorithm that could largely decrease the number of high charging current peak is also implemented. Therefore the cycle life of the battery can be improved such that it is suitable for a mild hybrid vehicle with frequent engine start-stop and regenerative-braking. Also, by maximizing the use of the ultracapacitor, the system efficiency during high current charging and discharging operation is improved. Finally, this system has the effects that improves the efficiency of energy storage system and reduces the fuel consumption of a vehicle. To verify the validity of the proposed system, this paper presented cycles test results of different energy storage systems: a simple VRLA battery, hybrid energy Pack (HEP, a VRLA battery in Parallel with Ultracapacitor) and a HEP with a switch that controlled by energy management system (EMS). From the experimental result, it was proved the effectiveness of the algorithm.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.646-651
• /
• 2015

본 논문에서는 일반적인 건물자동제어 시스템의 아키텍처를 네트워크 구성과 관제점, 상호운영성, 성능 측면에서 분석하고, 점대점 고속 유선 방식으로 연결된 가상화 기반의 새로운 건물자동제어 시스템을 제시하였다. 클라우드 컴퓨팅 기반의 건물자동제어 시스템은 사용자 기반의 환경제어를 가능하게 하며 건물자동제어 시스템의 성능 향상을 통하여 건물에너지관리를 효율적으로 수행할 수 있다. 또한, 가상화 방식은 부하관리사업자의 건물 군관리를 효율적으로 수행할 수 있도록 한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권6호
• /
• pp.2848-2869
• /
• 2017

Mobile Wireless Sensor Networks (MWSN) are usually constrained in energy supply, which makes energy efficiency a key factor to extend the network lifetime. The management of the network topology has been widely used as a mechanism to enhance the lifetime of wireless sensor networks (WSN), and this work presents an alternative to this. Software Defined Networking (SDN) is a well-known technology in data center applications that separates the data and control planes during the network management. This paper proposes a solution based on SDN that optimizes the energy use in MWSN. The network intelligence is placed in a controller that can be accessed through different controller gateways within a MWSN. This network intelligence runs a Topology Control (TC) mechanism to build a backbone of coordinator nodes. Therefore, nodes only need to perform forwarding tasks, they reduce message retransmissions and CPU usage. This results in an improvement of the network lifetime. The performance of the proposed solution is evaluated and compared with a distributed approach using the OMNeT++ simulation framework. Results show that the network lifetime increases when 2 or more controller gateways are used.

• 한국데이타베이스학회:학술대회논문집
• /
• 한국데이타베이스학회 2010년도 춘계국제학술대회
• /
• pp.33-41
• /
• 2010

Recently the number of IT equipment have increased. It consumes large amounts of energy and is emissions of greenhouse gases. Co2 emissions with the PC and the monitor has the highest percentage to 39% more than other IT equipment. In addition, Plan for your PC's power management and technology development is being pursued in developed countries. To reduce energy costs of organizations with large numbers of the PC and to cut down on Co2 emissions, the energy load control technology of ACPI standards-based PC IS suggested. AMI-based PC power-management system was constructed, Approximately 20% of operating a result of the test power consumption was reduced. Looking at the case of the United States, PC monitors from the University of Wisconsin-Oshkosh was Sleep mode. As a result, the monitor on a, $ 20 for a year reduced energy costs. In GE(General Electronic), Approximately 75,000 PC's power setting time was Monitor Off :15 minutes/ Hard Drives Off 30 minutes/ System Standby 30 minutes/ Hibernation mode 2 hours. 1 year, electric bill was $ 2.5 million savings and 3 years electric bill was $ 6.5 million savings. Measuring energy usage data, using the measured data, electric energy management technology is not. Platform development to measure energy usage for Individual energy-consuming equipment is urgently required.