• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.1
• /
• pp.62-73
• /
• 2016

The variation of groundwater by wave, tide and precipitation conditions is closely related to the vegetation environment at the natural vegetation and sandy based beach, and it has a significant impact on the vegetation development and ground stabilization. In this study, the water temperature, electrical conductivity, and pressure were monitored at five observational stations normal to the Jinu-do(Island) shoreline of Nakdong river estuary from March 2012 to September 2014 (approximately 799 days) with the aim of measuring the variation in groundwater-table characteristics. The purpose of the study was to identify factors (tide, wave etc.) affecting groundwater-table variation using time series and correlation analysis, and to record spatial variations in the groundwater level and electrical conductivity as a result of storm events. The observational station in the intertidal zone was strongly affected by wave period and tide level. During the storm period, the groundwater-table and electrical conductivity were stabilized at the edge of sand dunes, vegetation, and areas of transition between freshwater and seawater.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.5
• /
• pp.118-123
• /
• 2012

Water balance has a significant impact on the overall fuel cell performance. Maintenance of proper water management should provide an adequate membrane hydration and avoidance of water flooding in the catalyst layer and gas diffusion layer. Considering the important of advanced water management in PEM fuel cell, this study proposes a simple one dimensional water transportation model of PEM fuel cell for use in a dynamic condition. The model has been created by assumption that the output is the water liquid saturation difference. The liquid saturation change is the total difference between the additional water and the removal water on the system. The water addition is obtained from fuel cell reaction and the electro osmotic drag. The water removal is obtained from capillary transport and evaporation process. The result shows that the capillary water transport of low temperature fuel cell is high because the evaporation rate is low.

• Journal of Korean Society of Transportation
• /
• v.28 no.4
• /
• pp.97-106
• /
• 2010

Environmental issues resulting from climate change and energy crises have become global issues, and cycling has gained greater popularity for sustainable transportation. Though many cities are trying to build bicycle roads, it is not easy to implement bicycle roads because there is little available space for bicycle facilities. Therefore, road diets have become more popular in Korea. However, there has been no intensive research to date of their impacts. The purpose of this research is to evaluate the effects of road diets and construction of bike lanes. Every benefit, including energy benefit, environmental benefit, and health benefit is considered, while only time savings benefit has been considered in previous studies. The benefit analysis for the Seoul metropolitan area as a case study shows that road diets have a (1) time saving benefit for only five percent of the mode share and (2) enough total benefit even if bicycle mode share is less than two percent.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.577-596
• /
• 2018

ASEAN countries consist of vast coastal areas and thousands of islands that are vulnerable to the effects of climate change on sea level rise. It is believed that this will play an important role in reducing greenhouse gas emissions globally in order to minimize the damage suffered by ASEAN countries. To overcome this issue, biofuels have been used to minimize the impact on the environment by replacing fossil fuels and to reduce greenhouse gas emissions. In those cases of United States, Brazil and Europe, where biofuels are highly utilized, research, development and investment in this field have been actively conducted in the past. In ASEAN countries, however, it has not been a long time since the biofuel policies were established. To overcome this problem, we investigated the renewable fuel policy in the United States, Brazil and the European Union. Based on this, we suggested the utilization plan and prospect of biofuel policy in ASEAN countries.

• Fire Science and Engineering
• /
• v.32 no.4
• /
• pp.122-130
• /
• 2018

Recent urbanization, population densification, and the impact of global climate change are causing disasters to become larger and more complex. Meanwhile, in Korea, there is an emphasis on preventing, restoring, and recovering from disasters. However, disaster medical care, which is absolutely necessary to maintain life in a disaster, is being ignored. Therefore, in this study, we selected Seoul as the study area where flood damage is frequent and underground housing is densely populated. Assuming underground housing in the immersion history area as the emergency patient site, transfer distance and transfer time were analyzed. This study considered both accessibility to emergency medical facilities and disaster sites and accessibility from emergency services to disaster sites. Therefore, it seems to be meaningful as basic data for the improvement of emergency medical services.

• International Journal of High-Rise Buildings
• /
• v.7 no.1
• /
• pp.17-32
• /
• 2018

This paper explores the function of a structural skin with an embossed surface applicable to use for tall building structures. The major diagrid system with a secondary embossed surface structure provides an enhanced perimeter structural system by increasing tube section areas and reduces aerodynamic loads by disorienting major organized structure of winds. A parametric study used to investigate an optimized configuration of the embossed structure revealed that the embossed structure has a structural advantage in stiffening the structure, reducing lateral drift to 90% compared to a non-embossed diagrid baseline model, and results of wind load analysis using computational fluid dynamics, demonstrated the proposed embossed system can reduce. The resulting undulating embossed skin geometry presents both opportunities for incorporating versatile interior environments as well as unique challenges for daylighting and thermal control of the envelope. Solar and thermal control requires multiple daylighting solutions to address each local façade surface condition in order to reduce energy loads and meet occupant comfort standards. These findings illustrate that although more complex in geometry, architects and engineers can produce tall buildings that have less impact on our environment by utilizing structural forms that reduce structural steel needed for stiffening, thus reducing embodied $CO^2$, while positively affecting indoor quality and energy performance, all possible while creating a unique urban iconography derived from the performance of building skin.

• Journal of the Korean Institute of Gas
• /
• v.17 no.5
• /
• pp.37-41
• /
• 2013

This paper presents the strength safety of stress and deformation behaviors using the finite element method as a function of the thickness of the protective helmets with and without an extruder on the top of the shell structure. The helmet that would provide head and neck protections without causing discomfort to the user when it was worn for long periods of time should be manufactured for increasing the safety and impact energy absorption. The stress analyzed results show that when the impulsive force of 4,540N is applied on the top surface of a helmet, the safe thickness is 3.7mm for the conventional helmet and 3.2mm for the modified new helmet. Based on the deformation analysis, the FEM results recommend that the safe thickness is 3.2mm for the conventional helmet and 2.0mm for the modified new helmet. Thus, it may be more safe design of the helmet, which has an extruded structure on the summit surface of the helmet.

• Wind and Structures
• /
• v.29 no.4
• /
• pp.247-270
• /
• 2019

Wind-resistant design of existing cooling tower structures overlooks the impacts of rainfall. However, rainstorm will influence aerodynamic force on the tower surface directly. Under this circumstance, the structural response of the super-large cooling tower (SLCT) will become more complicated, and then the stability and safety of SLCT will receive significant impact. In this paper, surrounding wind fields of the world highest (210 m) cooling tower in Northwest China underthree typical wind velocities were simulated based on the wind-rain two-way coupling algorithm. Next, wind-rain coupling synchronous iteration calculations were conducted under 9 different wind speed-rainfall intensity combinations by adding the discrete phase model (DPM). On this basis, the influencing laws of different wind speed-rainfall intensity combinations on wind-driving rain, adhesive force of rain drops and rain pressure coefficients were discussed. The acting mechanisms of speed line, turbulence energy strength as well as running speed and trajectory of rain drops on structural surface in the wind-rain coupling field were disclosed. Moreover, the fitting formula of wind-rain coupling equivalent pressure coefficient of the cooling tower was proposed. A systematic contrast analysis on its 3D distribution pattern was carried out. Finally, coupling model of SLCT under different working conditions was constructed by combining the finite element method. Structural response, buckling stability and local stability of SLCT under different wind velocities and wind speed-rainfall intensity combinations were compared and analyzed. Major research conclusions can provide references to determine loads of similar SLCT accurately under extremely complicated working conditions.

• Journal of the Korean Institute of Gas
• /
• v.23 no.1
• /
• pp.62-69
• /
• 2019

The high pressure underground pipelines of industrial states such as Ulsan, Yeosu consist with not only the pipelines for the utility support such as Raw material of petrochemical industry and steam, but also high pressure pipelines of toxic, flammable gas intricately like a web. Therefore, in this study, based on in-depth comparison analysis of industrial estate pipelines, and underground city gas pipelines' safety management status, excavation frequency, excavation depth, patrol period which are pipe damage impact factor by the other construction are analyzed. And, as a result, risk changes and correlations due to risk reduction strategy of the other construction are compared to be presented the safety inspection operation model for the high pressure underground pipelines of industrial estates.

• Journal of the Korean Institute of Gas
• /
• v.25 no.1
• /
• pp.30-39
• /
• 2021

Natural gas is globally emerging as an important energy source for environmental, political and regional reasons. In Korea, natural gas imported from oversea natural gas resources as a LNG, it is increased for an applications as a fuel and feedstock which replace the coal and nuclear energy. Because it is relied on the import market in Korea, it is very important to analyze the security for supply. Therefore, this study suggested a method for reducing supply risk and for providing stable supply and demand through risk analysis of Korea's import structure. In order to reduce the supply risk, the concentration of importing countries should be lowered and it is necessary to lower the proportion of countries with relatively low GSSI and increase the imports from Russia. Finally increasing the number of importing countries or maintaining friendly relations with countries where the supply is stable could give us the positive impact in terms of total GSSI.