• 한국레이저가공학회지
• /
• 제16권2호
• /
• pp.1-6
• /
• 2013

Picosecond lasers are a very effective tool for micromachining metals, especially when high accuracy, high surface roughness and no heat affected zone are required. However, low productivity has been a limit to broadening the spectrum of their industrial applications. Recently it was reported that in the micromachining of copper with a 1064nm picosecond laser, there exist the optimal pulse energy and repetition rate to achieve the maximum volume ablation rate. In this paper, we used a 515nm picosecond laser, which is more efficient for micromachining copper in terms of laser energy absorption, to obtain its optimal pulse energy and repetition rate. Theoretical analysis based on the experimental data on copper ablation showed that using a 515nm picosecond laser instead of a 1064nm picosecond laser is more favorable in that the calculated threshold fluence is 75% lower and optical penetration depth is 50% deeper.

• 비파괴검사학회지
• /
• 제21권3호
• /
• pp.307-312
• /
• 2001

운전중인 원자로 재료의 건전성 평가를 위한 기계적 시험의 하나인 샤르피 충격 시험편에 대하여 초음파 신호분석이 이루어졌나 시험편으로는 모재와 용접재를 사용하였는데 이들 재료는 고온, 고압의 냉각수 및 지속적인 고속중성자가 방출되고 있는 가동중인 발전소에서 감시시험을 통한 원자로재료의 건전성평가를 목적으로 정지기간동안 인출된 깃이다. 분석결과 속도 및 감쇠와 같은 초음파 특성들이 재질이 비교적 균일한 모재에 있어서는 중성자 조사량과 밀접한 관련이 있는 것으로 보였으며 이를 활용하여 비파괴적인 방법으로 재료에 대한 중성자 조사량이 어느 정도인지를 예측할 수 있는 가능성을 보여주었다.

• 한국레이저가공학회지
• /
• 제12권4호
• /
• pp.6-11
• /
• 2009

The LDS(Laser Direct Structuring) process uses thermoplastic polymers with a additive compound that serves as plating seed after the activation by laser. It can realize industry requirement such as miniaturization of electrical component, design flexibility and reduction of production steps. The purpose of this study is to introduce LDS, and to investigate the fundamental mechanism. Also the characteristics of conductive patterns were investigated with respect to laser fluence and intensity. We have used a pulsed fiber laser (wavelength : 1064nm) and copper electroless plating to fabricate conductive patterns. The result showed that laser induced metal-organic complex was caused metalization by electroless copper plating, the critical laser fluence was $1.41\;J/cm^2$ at a scan speed of 1 m/s.

• 대한금속재료학회지
• /
• 제47권12호
• /
• pp.819-827
• /
• 2009

This work is concerned with a statistical analysis of factors affecting the irradiation-assisted stress corrosion cracking (IASCC) of austenitic stainless steels for core internals of pressurized water reactors (PWR). The microstructural and environmental factors were reviewed and critically evaluated by the statistical analysis. The Cr depletion at grain boundary was determined to have no significant correlation with the IASCC susceptibility. The threshold irradiation fluence of IASCC in a PWR was statistically calculated to decrease from 5.799 to 1.914 DPA with increase of temperature from 320 to $340^{\circ}C$. From the analysis of the relationship between applied stress and time-to-failure of stainless steel components based on an accelerated life testing model, it was found that B2 life of a baffle former bolt exposed to neutron fluence of 20 and 75 DPA was at least 2.5 and 0.4 year, respectively, within 95% confidence interval.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1152-1157
• /
• 2004

Temporal behavior of the laser induced incandescence (LII) signal is often used for soot particle sizing, which is possible because the cooling behavior of a laser heated particle is dependent on the particle size. In present study, LII signals of soot particles are modeled using two non-linear coupled differential equations deduced from the energy- and mass-balance of the process. The objective of this study is to see the effects of particle size, laser fluence on soot temperature characteristics and cooling behavior. Together with this, we focus on validating our simulation code by comparing with other previous results. Results of normalized LII signals obtained from various laser fluence conditions showed a good agreement with that of Dalzell and Sarofim's. It could be found that small particles cool faster at a constant laser fluence. And it also could be observed that vaporization is dominant process of heat loss during first 100ns after laser pulse, then heat conduction played most important role while thermal radiation had little influence all the time.

• 대한방사선치료학회지
• /
• 제14권1호
• /
• pp.79-84
• /
• 2002

1.목적 : 작고 불규칙한 모양의 전자선 조사면에서 선원의 출력에 영향을 미치는 요인은 선형가속기의 collimation system, insert block diameter, energy 등이다. 때문에 이러한 조사면의 선량계산으로 LBR을 이용할 수 있는데 LBR(lateral build-up ratio)이란 동일한 incident fluence와 profile에 대해 circular field와 broad field의 선량비로서 나타낼 수 있다. 얻어진 LBR data는 elementary pencil beam 모형을 근거해 깊이와 에너지에 따른 함수(${\sigma}$)로 표현할 수 있다. 여기에서 얻어진 수식을 기초로 해서 만들어진 factor값이 작고 부정형의 전자선 조사면의 선량계산 유용성을 알아보고자 한다. 2.재료 및 방법: 심부선량은 water phantom에서 ion chamber로 측정하였다. Cerrobend와 electron applicator 에 따른 incident fluence의 변화를 알아보기 위해 Chamber를 0.5mm깊이에 놓고 측정하였다. 그리고 에너지와 electron applicator 크기에 따라 insert block diameter를 2-15cm로 변화시키며 심부선량을 측정하였고 이 값을 0.5mm 깊이에서 normalization 하였다. 이렇게 normalization 한 그래프로부터 LBR과 함수 (${\sigma}$)를 얻어했다. 3.결과 : 0.5mm 깊이에서 normalization한 심부선량-그래프로부터 LBR data와 그로부터 얻어낸 (${\sigma}$)함수 값을 기초로 하여 elementary pencil beam 모형의 깊이에 빠른 선량변화의 수식을 얻어낼 수 있었다. 4.결론 : 부정형 전자선 조사면에 대해 MU당 심부선량은 작은 circular field에서 측정된 LBR값, reference applicator와 insert block diameter 에 따른 incident fluence factor 그리고 reference broad field에서의 심부선량등 세 가지 data로 부터 계산할 수 있다. 이 방법을 이용하면 어떤 모양의 전자선 조사면에 대해서도 심부선량의 계산에 유용하다고 할 수 있다.

• Nuclear Engineering and Technology
• /
• 제52권11호
• /
• pp.2585-2593
• /
• 2020

Swift heavy ion (SHI) beam irradiation can generate desirable defects in materials by transferring sufficient energy to the lattice that favours huge possibilities in tailoring of materials. The effect of Ag¹⁵⁺ ion irradiation with energy 200 MeV on spray deposited V₂O₅ thin films of thickness 253 nm is studied at various ion doses from 5 × 10¹¹ to 1 × 10¹³ ions/㎠. The XRD results of pristine film confirmed orthorhombic structure of V₂O₅ and its average crystallite size was found to be 20 nm. The peak at 394 cm^-1 in Raman spectra confirmed O-V-O bonding of V₂O₅, whereas 917 cm^-1 arise because of distortion in stoichiometry by a loss of oxygen atoms. Raman peaks vanished completely above the ion fluence of 5 × 10¹² ions/㎠. Optical studies by UV-Vis spectroscopy shows decrement in transmittance with an increase in ion fluence up to 5 × 10¹² ions/㎠. The red shift is observed both in the direct and indirect band gaps until 5 × 10¹² ions/㎠. The surface topography of the pristine film revealed sheath like structure with randomly distributed spherical nano-particles. The roughness of film decreased and the density of spherical nanoparticles increased upon irradiation. Irradiation improved the conductivity significantly for fluence 5 × 10¹¹ ions/㎠ due to band gap reduction and grain growth.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.1046-1049
• /
• 1998

PLT(28) ($Pb_{0.72}La_{0.28}Ti_{0.93}O_3$) dielectric thin films have been deposited on Pt/Ti/$SiO_2$/Si substrates in situ by a laser ablation. We have systematically changed the laser fluence from $0.5\;J/cm^2$ to $3\;J/cm^2$, and deposition temperature from $450^{\circ}C$ to $700^{\circ}C$. The surface morphology was changed from planar grain structure to columnar structure as the nucleation energy was increased. The PLT thin film with columnar structure showed good dielectric properties. It is shown that the deposition temperature strongly affect the film nucleation compared with the laser fluence.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.366-370
• /
• 1997

This paper descibes a micro groove machining process on the polyurethane biopolymer by KrF excimer laser. To investigate the etch charcteristics of polyurethane biopolymer quantitatively,laser system for ablation was installed with high precison moter and then polymer ablation experiment, in which paramteters were fluence,pulse repetition rate,numbers of pulses and assist gas, was carred out. In this experiment, we found out that the value of critical energy density for ablation is 30mJ/cmsup2/ and the etching rate is more dependent on the pulse number and fluence than any other pamameter. Finally, we machined micro grooves for fiexibility as width 300.mu.m depth 100.mu.m and port for micro-devices mounting as length 100.mu.m width 300.mu.m depth .mu.m on the outer wallof polyurethane biopolymer tube which is used as medical device.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.698-701
• /
• 1998

PLT(28) ($Pb_{0.72}La_{0.28}Ti_{0.93}O_3$) dielectric thin films have been deposited on Pt/Ti/$SiO_2$/Si substrates in situ by a laser ablation. We have systematically changed the laser fluence from $0.5\;J/cm^2$ to $3\;J/cm^2$, and deposition temperature from $450^{\circ}C$ to $700^{\circ}C$. The surface morphology was changed from planar grain structure to columnar structure as the nucleation energy was increased. The PLT thin film with columnar structure showed good dielectric properties. It is shown that the deposition temperature strongly affect the film nucleation compared with the laser fluence.