• Environmental Engineering Research
• /
• v.14 no.2
• /
• pp.81-87
• /
• 2009

The decomposition of antibiotics (cefaclor) by gamma irradiation in aqueous solutions was experimentally evaluated. To obtain a mutual interaction between two factors (antibiotics concentrations and radiation doses) and to optimize these factors during the process, experimental design and statistical analysis were employed. The decomposition capability of the gamma radiation was also mathematically described as a function of cefaclor concentration and gamma-ray dose using the statistical analysis. The results showed that the cefaclor concentration ($X_1$) in the response $Y_1$ (Reduction of cefaclor concentration) and gamma-ray dose ($X_2$) in the response $Y_2$ (Removal efficiency (%) of cefaclor concentration) exhibited a significantly positive effect, whereas gamma-ray dose ($X_2$) in the response $Y_1$ showed a significantly negative effect. The estimated ridge of maximum responses and optimal conditions for $Y_1$:($X_1$,$X_2$)=(25 mg/L, 350 Gy) and $Y_2$:($X_1$,$X_2$)=(21 mg/L, 565 Gy) using canonical analysis were 4.37 mg/L of reduction of cefaclor concentration and 98.35% of removal efficiency of cefaclor concentration, respectively. The measurement values agreed well with the predicted ones, thereby confirming the suitability of the model for $Y_1$ and $Y_2$ and the success of the experimental design in optimizing the conditions of the gamma irradiation process.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.22 no.3
• /
• pp.60-67
• /
• 2014

Exhaust system used in toilet and cooking place of high riser public house is roof fan of two basic types : natural roof ventilator and natural/forced roof ventilator. Natural/forced roof ventilator has a motor in the rotary shaft. There are many high riser public house in Korea. These buildings were not viewed as being major contributors to exhaust pollutants producted in indoor. It was because many engineers thought that exhaust in high riser building depend on stack effect. This study investigates on stack pressure determined by exterior pressure and the difference pressure control in exhaust stack used in high riser public house. This paper focuses mainly on the effect of the time interval for power supply of motor installed in roof fan with function of natural wind velocity and of exhaust air volume of toilet. It is observed there are higher exhaust efficiency than the existing natural roof ventilator.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.4 s.107
• /
• pp.351-357
• /
• 2006

In this paper, a direct $TM_{01}-TE_{11}$ mode converter of circular waveguide which is used the approximated design method of mode conversion between $TM_{01}$ and $TE_{11}$ modes is designed for radiation with the maximum directivity of high power energy into air (rom high power microwave antenna system. The proposed direct $TM_{01}-TE_{11}$ mode converter is calculated and designed with an approximated method for non-linear function about an extended non-constant serpentine type of circular waveguide. Then, the designed mode converter is optimized by length of 200 mm and efficiency above 95% by FIM simulation and achieved short length and high efficiency of the antenna by results of fabricated and measured characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.2975-2981
• /
• 2011

We propose an efficiency analysis method to test whether Schisandra tea is beneficial to the health of internal organs, and, if so, to find which organ is mostly benefited. Firstly, for this, the color change in the right cheek region of face images before and after drinking Schisandra tea is analyzed using image processing techniques. Also, acoustic analysis experiments on both of the vocal cords vibration and the intensity value of acoustic signal are performed to investigate further Schisandra tea's effectiveness. The results of lung function smoothly by eating omijacha become. Vocal cords vibration and voice energy intensity of the right cheek region has changed a steady increase of the b values were observed.

• Current Photovoltaic Research
• /
• v.10 no.1
• /
• pp.16-22
• /
• 2022

The long-term stability of PSCs against visual and UV light, moisture, electrical bias and high temperature is an important issue for commercialization. In particular, since the operation temperature of solar cell can rise above 85℃, a study on thermal stability is required. In this study, the cause of thermal-induced degradation of PSCs was investigated using the SCAPS-1D simulation tool. First, PSCs of TiO₂/CH₃NH₃PbI₃/Spiro-OMeTAD/Au structure were exposed to a constant temperature of 85℃ to observe changes in conversion efficiency and quantum efficiency. Because the EQE reduction above 500 nm was remarkable, we simulated PSCs performance as a function of lifetime, doping density of perovskite and spiro-OMeTAD. Consequently, the main cause of thermal-induced degradation is considered to be the change in the perovskite doping concentration and lifetime due to ion migration of perovskite.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.467-470
• /
• 2012

This paper proposes a technique of sybil attack detection using an ID-based certificate on sensor network. First, it can solve the broadcast storm problem happening when keys are distributed to sensor nodes. Second, it prevents the replay attack by periodically generating and changing the keys of sensor nodes with Key-chain technique. Third, it authenticates sensor node's ID using hash function. So, it maximizes sensor node's memory usage, reduces communication overhead. Finally it detects Sybil attack through ID-based certificate. Therefore, the proposed technique of Sybil attack detection using ID-based certificate consider simultaneously energy efficiency and stability on sensor network environment, and can trust the provided information through sensor network.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.165.1-165.1
• /
• 2010

In the past, drivers bought a fuel additives to treat a combustion chambers or injector nozzles for carbon or gum deposit at market. But, nowadays, as raised cost of fuel for a vehicle the consumers also start focusing on a function of fuel additives that increases fuel economy of one. Some fuel additive manufacturers and agents advertise that their goods make a car it's initial state. This paper shows data for 3 years that were acquired during test for registration of an additive in domestic. The data were sorted according to kind of vehicle, kind of fuel, test mode, CO, HC, NOx, PM, total emission, fuel economy and accumulated mileage. And than by using simple linear regression analysis changes according to accumulated mileage was displayed. Normal distribution and histogram of rate of increase and decrease were displayed. the analyzed data indicated that a fuel additive maintain and make a car the first state of one but can't make a car be batter than initial the one.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.43.1-43.1
• /
• 2010

In the crystalline silicon solar cells, the full area aluminum_back surface field(BSF) is routinely achieved through the screen-printing of aluminum paste and rapid firing. It is widely used in the industrial solar cell because of the simple and cost-effective process to suppress the overall recombination at the back surface. However, it still has limitations such as the relatively higher recombination rate and the low-to-moderate reflectance. In addition, it is difficult to apply it to thinner substrate due to wafer bowing. In the recent years, the dielectric back-passivated cell with local back contacts has been developed and implemented to overcome its disadvantages. Although it is successful to gain a lower value of surface recombination velocity(SRV), the series resistance($R_{series}$) becomes even more important than the conventional solar cell. That is, it is a trade off relationship between the SRV and the $R_{series}$ as a function of the contact size, the contact spacing and the geometry of the opening. Therefore it is essential to find the best compromise between them for the high efficiency solar cell. We have investigated the optimal design for the local back contact by using PC1D simulation.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.2
• /
• pp.31-36
• /
• 2020

The creation of the Defense Integrated Data Center(DIDC) has resulted in a reduction in manpower, operating costs, efficient and effective management of resources. However, it is difficult to effectively collect and manage the data of a large number of battlefields coming from equipments such as drones, robots, and IoT added to the fourth industrial revolution and the future battlefield. Therefore, we will propose the design of DIDC network system using NFV and SDN, which are emerging as the core technologies of 5G, a mobile communication technology. After analyzing the data sheet of each equipment, it is considered that by integrating the redundant functions, energy efficiency, resource utilization and effective network management will be possible.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.386-389
• /
• 2006

BIPV(Building Integrated PV) system can expect dual effects that reduce expenses for establishment of PV system by adding new function as outer covering material of building expect producing the electricity. In case of PV(photovoltaic system) there are many generation differences according to the exterior environmental facts(solar cell array, design and installation condition of interactive inverter system). In this paper, we compared constitute factors of 3kW BIPV(solar cell module, inverter), operating characteristic and total system characteristic(utilization, generation efficiency, loss fact) and found out long time operating data using a watch instrumentations. By use of long time operating result, compare a totally operating characteristics, and we proposed a next building application of BIPV. BIPV system that is proposed in this paper, was established in Solar Energy research center of Chosun University, composed with system. The objective of this paper, is to provide a efficient BIPV design method through the considerations for the integration of PV system.