• Korean Chemical Engineering Research
• /
• 제47권5호
• /
• pp.587-592
• /
• 2009

연속조작 기포탑에서 열전달 메카니즘을 검토하기 위하여 열전달 모델과 에너지 소멸속도를 고찰하였다. 기포탑에서 표면갱신이론(Surface renewal theory)에 기초한 비정상상태 열전달모델에 의한 에너지소멸 속도($E_D$)는 기포탑에서 기체와 액체상의 거동에 의한 수력학적인 에너지소멸 속도($P_v$)와 비교하여 매우 작게 나타났다. 이와같은 결과로 표면갱신 이론에 의한 비정상상태 열전달모델에서 사용된 에너지 소멸속도와 기포탑 전체에 대한 수력학적 에너지 수지에 의해 산출된 수력학적 에너지 소멸속도는 산출 메카니즘이 서로 다른 별개의 에너지 소멸속도로 규명되었다. 이들 두 종류의 에너지 소멸속도를 각각 본 연구의 실험 변수인 기체와 액체 유속의 상관식으로 나타내어 완전히 다른 값을 나타냄을 확인하였다.

• Geomechanics and Engineering
• /
• 제11권5호
• /
• pp.657-670
• /
• 2016

The energy dissipation of coal under dynamic loads is a major issue in geomechanics and arising extensive concerns recently. In this study, dynamic loading tests of coal were conducted using a split Hopkinson pressure bar (SHPB) system, the characteristics of dynamic behavior and energy dissipation of coal were analyzed, and the mechanism of energy dissipation was discussed based on the fracture processes of coal under dynamic loads. Experimental results indicate that the energy dissipation of coal under dynamic loads has a positive linear correlation with both incident energy and dynamic compressive strength, and the correlation coefficients between incident energy, dynamic compressive strength and the energy dissipation rate are 0.74 and 0.98, respectively. Theoretical analysis demonstrates that higher level of stress leads to greater energy released during unstable crack propagation, thus resulting in larger energy dissipation rate of coal under dynamic loads. At last, a semi-empirical energy dissipation model is proposed for describing the positive relationship between dissipated energy and stress.

• Earthquakes and Structures
• /
• 제24권3호
• /
• pp.183-192
• /
• 2023

It is essential to properly understand the seismic behavior of reinforced concrete (RC) columns confined by stirrups that experience different corrosion rates. The current study investigated the effect of seismic performance indicators such as strength loss, energy dissipation rate, ductility and hysteresis damping on specimens and models for different stirrup corrosion rates. Analysis revealed the adverse effects of corrosion on the bond performance between the concrete and steel bars which affected the seismic performance of the columns. It was found that with increasing corrosion rate, ductility and energy dissipation of the specimens decreased. Compared with the uncorroded specimen, the ductility factor and energy dissipation decreased observably, by 22.89% and 60.64%, respectively. An attenuation relationship is proposed for the corrosion rate of the stirrups for different stirrup yield strengths, concrete compressive strengths, concrete covers and stirrup spacing.

• 대한기계학회논문집
• /
• 제11권1호
• /
• pp.1-18
• /
• 1987

본 연구에서는 입자가 부상된 이상난류제트유동에 Einstein의 확산모형, Pes- kin모형, 3-방정식 모형, 4-방정식 모형, 대수응력모형 등을 적용하여 해석하고 각 모 형들의 결과를 비교 분석하였다. 이상난류유동의 수치해석에서 공기는 제1유체유동 으로 하고 첨가되는 고체분말의 흐름은 밀도(.rho.$_{p}$), 층류동점성계수(.nu.$_{p}$), 과점성계수(.nu.$_{pt}$ )를 갖는 제2유체유동의 흐름으로 간주하였다.

• 대한기계학회논문집
• /
• 제12권1호
• /
• pp.1-7
• /
• 1988

본 연구에서는 컬럼모델을 보울트로 고정할 때 접합면에 알루미늄판, 황동판, 스테인리스판 등을 삽입하고 정적강성과 동적특성을 검토하여 이것을 기초로 공작물- 주축대-공구로 형성되고 있는 사이클중에서 선반의 주축대와 베드를 연결하는 결합부에 모델실험을 사용한 게재물을 삽입하고 선반구축계의 동적특성을 검토하였다.

• Geomechanics and Engineering
• /
• 제29권2호
• /
• pp.99-111
• /
• 2022

Instability of bolted rock mass has been a major hazard in the underground coal mining industry for decades. Developing effective support guidelines requires understanding of complex bolted rock mass failure mechanisms. In this study, the dynamic failure behavior, mechanical behavior, and energy evolution of a laboratory-scale bolted specimens is studied by conducting laboratory static-dynamic coupled loading tests. The results showed that: (1) Under static-dynamic coupled loading, the stress-strain curve of the bolted rock mass has a significant impact velocity (strain rate) correlation, and the stress-strain curve shows rebound characteristics after the peak; (2) There is a critical strain rate in a rock mass under static-dynamic coupled loading, and it decreases exponentially with increasing pre-static load level. Bolting can significantly improve the critical strain rate of a rock mass; (3) Compared with a no-bolt rock mass, the dissipation energy ratio of the bolted rock mass decreases exponentially with increasing pre-static load level, the ultimate dynamic impact energy and dissipation energy of the bolted rock mass increase significantly, and the increasing index of the ratio of dissipation energy increases linearly with the pre-static load; (4) Based on laboratory testing and on-site microseismic and stress monitoring, a design method is proposed for a roadway bolt support against dynamic load disturbance, which provides guidance for the design of deep underground roadway anchorage supports. The research results provide new ideas for explaining the failure behavior of anchorage supports and adopting reasonable design and construction practices.

• 대한기계학회논문집B
• /
• 제24권4호
• /
• pp.578-588
• /
• 2000

A low-Reynolds-number second moment turbulence closure is improved with the aid of DNS data. For the model coefficients of pressure-strain terms, we adopted Shima's model with some modification. Shin and Choi's new dissipation-rate equation is employed to simulate accurately the turbulence energy dissipation rate distribution in the near wall sublayer. The results of computations are compared with DNS, LES data and experimental data for turbulent plane channel flow with rotation about spanwise axis. The present second moment closure achieves a level of agreement similar to that for the non-rotating. In particular, it accurately captures the distribution of turbulence energy dissipation rate in the near wall region.

• 한국기계가공학회지
• /
• 제21권3호
• /
• pp.63-69
• /
• 2022

Compressor efficiency must be improved to reduce refrigerator power consumption. In this study, the heat dissipation rate through the compressor housing is increased via gap flow passages between the compressor body and housing. Four types of gap flow passages are considered for achieving the maximum heat-dissipation rate. In addition, thermal analysis is performed to examine the effect of increased heat dissipation rate on the energy efficiency ratio (EER). The results show that the heat dissipation rate, compressor superheat, and compressor EER increased by up to approximately 52%, 3 ℃, and approximately 1%, respectively.

• Korean Chemical Engineering Research
• /
• 제52권3호
• /
• pp.371-377
• /
• 2014

Characteristics of holdup and flow behavior of fluidized solid particles were investigated in a liquid-solid circulating fluidized bed ($0.102m{\times}3.5m$). Effects of liquid velocity ($U_L$), particle size ($d_P$) and solid circulation rate ($G_S$) on the solid holdup, overall particle rising velocity, slip velocity between liquid and particles and hydrodynamic energy dissipation rate in the riser were examined. The particle holdup increased with increasing $d_P$ or $G_S$ but decreased with increasing $U_L$. The overall particle rising velocity increased with increasing $U_L$ or $G_S$ but decreased with increasing $d_P$. The slip velocity increased with increasing $U_L$ or $d_P$ but did not change considerably with $G_S$. The energy dissipation rate, which was found to be closely related to the contacting frequency of micro eddies, increased with increasing $d_P$, $G_S$ or $U_L$. The solid particle holdup was well correlated with operating variables such as $U_L$, $d_P$ and $G_S$.

• 한국추진공학회지
• /
• 제11권3호
• /
• pp.35-42
• /
• 2007

로켓 엔진의 음향 불안정을 제어하기 위해 모형 연소실에 배플형 분사기가 장착된 경우의 음향 감쇠 특성을 수치해석적으로 조사하였다. 기존에 보고된 배플형 분사기의 효용성을 확인하였고 분사기간 간극이 존재할 때 음향 감쇠 효과가 증대되는 메커니즘을 규명하였다. 여러 가지 크기의 간극에 따라 음향학적 감쇠능력을 조사하였고, 본 연소실에서는 0.1 mm 정도의 간극에서 최적의 감쇠능력을 가짐을 알 수 있었다. 음향 감쇠 효과가 증대되는 메커니즘을 규명하기 위해, 분사기 사이의 간극에 따른 에너지 소산율과 와도를 계산하였고, 소산율 변화 추이와 감쇠인자 변화 추이가 유사함을 알았다. 이를 통해, 간극에 의한 에너지 소산의 종대로 음향 감쇠 효과가 증가함을 알았다.