• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.8
• /
• pp.530-537
• /
• 2010

With the advancement of technology, the density of IT equipment, heat load and power consumption continue to increase in high density internal-load dominated buildings as datacenters. To improve the HVAC system's energy performance and efficiency, there is a need to find methods of using outside air. Through cooling tower control that is based on outside wet-bulb temperature, the water-side economizer made it possible to achieve a maximum energy performance improvement of about 16.6% over the basic chilled water system, whereas the air-side economizer, through control based on outdoor air enthalpy, made it possible to achieve about 42.4% improvement.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.188-193
• /
• 2022

The energy efficiency of memory systems is an important task in designing future computer systems as memory capacity continues to increase to accommodate the growing big data. In this article, we present an energy-efficient last-level cache management policy for future mobile systems. The proposed policy makes use of low-power PCM (phase-change memory) as the main memory medium, and reduces the amount of data written to PCM, thereby saving memory energy consumptions. To do so, the policy keeps track of the modified cache lines within each cache block, and replaces the last-level cache block that incurs the smallest PCM writing upon cache replacement requests. Also, the policy considers the access bit of cache blocks along with the cache line modifications in order not to degrade the cache hit ratio. Simulation experiments using SPEC benchmarks show that the proposed policy reduces the power consumption of PCM memory by 22.7% on average without degrading performances.

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.329-333
• /
• 2012

In this paper, By the time that the tilting technology is adopted in railway rolling stock, we analyzed quantitatively energy saving by reducing the power consumption with the reduction of the operation time through the speed improvement and suggested the necessity to introduce tilting technology in the domestic rail vehicles. To achieve this purpose, the effect of energy saving by comparing and analyzing the power consumption during the operation by TTX HANVIT 200 and 8200 electric locomotives to pull the trains on the same line was suggested and the efficiency of the main devices was compared and analyzed by measuring the power consumption by a single unit. As the energy saving is the world topic, the studies on reducing energy usage goes on constantly in many areas. In addition, as of the time to improve the conventional tracks to speed up and change the signals, Tilting technology will be contributed to the management environment by enlarging the passengers' demand through the reduction of the operation time and saving energy using the existing infrastructure.

• The KIPS Transactions:PartC
• /
• v.17C no.5
• /
• pp.433-440
• /
• 2010

Energy efficiency, low latency and scalability for wireless sensor networks are important requirements, especially, the wireless sensor network consist of a large number of sensor nodes should be minimized energy consumption of each node to extend network lifetime with limited battery power. An efficient algorithm and energy management technology for minimizing the energy consumption at each sensor node is also required to improve transfer rate. Thus, this paper propose no-overlap multi-pass protocol provides for sensor data transmission in the wireless sensor network environment. The proposed scheme should minimize network overhead through reduced a sensor data translation use to searched multi-path and added the multi-path in routing table. Proposed routing protocol may minimize the energy consumption at each node, thus prolong the lifetime of the sensor network regardless of where the sink node is located outside or inside the received signal strength range. To verify propriety proposed scheme constructs sensor networks adapt to current model using the real data and evaluate consumption of total energy.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.5
• /
• pp.72-76
• /
• 2012

In this paper, the capacity criteria have been proposed in order to select a cooperative relay node in WSNs, under the environment where direct path has a poor link gain. This process may ensure the efficiency improvement of signal transfer between source and destination and reduction of energy consumption as well. Two criteria are incorporated to select a cooperative relay node. Firstly, calculate the energy gain ratio between the relay path and the direct path. Secondly, investigate the effects of relay node's usage in WSNs through the simulation in terms of energy consumption. In the simulation, the relationship between energy consumption and direct path gain, uniformly generated in the certain range and its positive effects have been identified.

• ETRI Journal
• /
• v.39 no.2
• /
• pp.275-283
• /
• 2017

A green technology for reducing energy consumption has become a critical factor in ICT industries. However, for the telecommunications sector in particular, most network elements are not usually optimized for power efficiency. Here, we propose a novel energy-efficient packet switching method for use in an IP network for reducing unnecessary energy consumption. As a green networking approach, we first classify the network nodes into either header or member nodes. The member nodes then put the routing-related module at layer 3 to sleep under the assumption that the layer in the OSI model can operate independently. The entire set of network nodes is then partitioned into clusters consisting of one header node and multiple member nodes. Then, only the header node in a cluster conducts IP routing and its member nodes conduct packet switching using a specially designed identifier, a tag. To investigate the impact of the proposed scheme, we conducted a number of simulations using well-known real network topologies and achieved a more energy- efficient performance than that achieved in previous studies.

• Journal of Communications and Networks
• /
• v.7 no.2
• /
• pp.126-134
• /
• 2005

Reducing energy consumption in mobile hosts (MHs) is one of the most critical issues in wireles/mobile networks. IP paging protocol at network layer and power saving mechanism (PSM) at link layer are two core technologies to reduce the energy consumption of MHs. First, we investigate the energy efficiency of the current IEEE 802.11 power saving mechanism (PSM) when IP paging protocol is deployed over IEEE 802.11 networks. The result reveal that the current IEEE 802.11 PSM with a fixed wakeup interval (i.e., the static PSM) exhibits a degraded performance when it is integrated with IP paging protocol. Therefore, we propose an adaptive power saving mechanism in IEEE 802.11-based wireless IP networks. Unlike the static PSM, the adaptive PSM adjusts the wake-up interval adaptively depending on the session activity at IP layer. Specifically, the MH estimates the idle periods for incoming sessions based on the exponentially weighted moving average (EWMA) scheme and sets its wake-up interval dynamically by considering the estimated idle period and paging delay bound. For performance evaluation, we have conducted comprehensive simulations and compared the total cost and energy consumption, which are incurred in IP paging protocol in conjunction with various power saving mechanisms: The static PSM, the adaptive PSM, and the optimum PSM. Simulation results show that the adaptive PSM provides a closer performance to the optimum PSM than the static PSM.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.270-276
• /
• 2012

In this study, thermally coupled distillation system and conventional two-column process were investigated for extractive distillation. The two processes were simulated and optimized using Aspen plus. Objective function for the optimization was energy consumption and optimization results to reduce energy consumption were used to get guidelines for design and operation for the two extractive distillation processes. Comparison of these two processes showed that thermally coupled distillation system provided better energy efficiency and lower capital cost than conventional distillation system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.1
• /
• pp.56-64
• /
• 2013

TICN, a next-generation tactical communication network based on a wireless network, acts as the backbone of the whole network. TICN requires the routing which takes both survivability of passage, reliability, and safety of wireless link into consideration. A tactical network like TICN may maintain the passage for just a short period of time due to topology's frequent changes; In this process all nodes, dependent on batteries for their necessary energy, are restricted by batteries' durability in due course. To overcome this shortcoming, the up-to-date protocols consider only either of diminishing or balancing out energy consumptions. Thus there was a limitation to enhancing both throughput and energy efficiency. The thesis proposes a protocol which regards both throughput and energy efficiency, and enhances node survivability by means of minimizing and balancing energy consumption of the whole network. The protocol brings out an improvement in throughput and makes each node's energy usage more effective.

• Journal of Energy Engineering
• /
• v.15 no.4 s.48
• /
• pp.284-290
• /
• 2006

The improvement of energy recovery is mandatory to decrease consumption of fossil fuels and to minimize negative impacts on the environment which originates from large cooling and heating demand. The absorption heat pump technology has a large potential for energy saving in this respect. Absorption heat pump is a means to upgrade waste heat without addition of extra thermal energy. In this study, resorption heat pump for energy recovery has been investigated using methanol-glycerine. The simulated calculation of theoretical thermal efficiency was performed based on the thermodynamic properties of the working fluid over various operating conditions. The thermal efficiency of higher than 0.4 was obtained by raising industrial waste heat, $70{\sim}80^{\circ}C$, by $40^{\circ}C$ in this system.