• Journal of Korean Physical Therapy Science
• /
• v.9 no.3
• /
• pp.97-106
• /
• 2002

Purpose. This study was tried to compare the effect of the change in postural deviation caused by the pain side Subjects and Methods. Inpatients and outpatients (n=71) were selected from I hospital who have a musculoskeletal low back pain and shoulder pain without any history of the central nervous system (CNS) lesions, orthopaedic problems of the both lower extremities, or the vestibular and the visual default. For the control group, normal and healthy subjects (n=30) were selected without any history of weight bearing disorders. the weight bearing was rated by the computerized force plate. Results. 1) Postural deviation was not significant difference between patients and control group(p<0.01). But postural deviation in patients was more pronounced than control group. 2) There was significant difference of postural deviation between in patients according to the pain side(p<0.01). When the pain side was on the left side, postural deviation tended to the right. When the pain side was on the right side and vertebral body, postural deviation tended to the left. 3) There was no significant difference of postural deviation between regional pain in shoulder and regional pain in low back(p<0.01). Discussions and Conclusion. As a result, the pain, for sure, affected the good posture and its keeping process directly or/and indirectly. Therefore, as the postural deviation increases, the additional energy consumption increased by the works of the muscles to keep the good posture. Preponderated postural deviation, furthermore, could load too much to the musculoskeletal system, leading to increase the pain. The postural deviation, a result of the pain, can cause a secondary deformity of the distal area as a compensatory reaction, and this compensation actually become a cause of the musculoskeletal symptom back in a cycle. Therefore, the appropriate treatment of the musculoskeletal problem and the education of the posture correction should be given to decrease the pain, preventing the secondary deformities, and increasing muscle energy efficiency of the posture remaining muscles.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.886-887
• /
• 2015

There is a growing interest in and demand for power industry acceleration and energy efficiency due to the increased energy consumption, environmental issues. Electronic power IT convergence industries such as intelligent power system has attract attention as new growth engine industry. A large number of sensors and motors are being installed following unmanned, automated in existing incoming panel management system. Observe the operating conditions and rapid response is essential. Despite the need for immediate action to be taken in the event of various later failed to recognize the emergency power can lead to accidents. In this paper, we propose a new architecture of the implementation of incoming panel monitoring system for power monitoring, fault detection, maintenance and system control using open source hardware platform and Wi-Fi networks.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.111-119
• /
• 2015

Smart Grid is a next-generation intelligent grid to optimize energy efficiency by integrating information and communication technologies to the existing power grid as a two-way exchange of information. HPGP communication standard for smart grid implementation has been developed for the emerging smart energy, home automation, electric vehicle communications applications. HPGP communication standard has the advantage of reducing cost and power consumption. Also, it can be interoperated with the previous HPAV communication standard. For the introduction of a new communication standard, the analysis of the reliability and interoperability verification is required. In this paper, we present sniffer test method as reliability test method about power line communication between PEV(Plug-in Electric Vehicle) and EVSE(Electric Vehicle Supply Equipment). Power line communication between PEV and EVSE is one of the most important Smart Gird applications. Also, we analyzed sniffer test results about power line communication based on HPGP between PEV and EVSE by using QCA7000 device, AVitar and Tool kit.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.2
• /
• pp.101-111
• /
• 2011

A new MAC protocol, MT-MAC(Multi-Tier Medium Access Control) by name, is proposed for dense sensor networks. Depending on the density of nodes in a virtual cluster, the cluster header performs the splitting to several tiers in nodes of virtual cluster. MT-MAC split the tiers to use modfied-SYNC message after receiving the beacon message from the cluster header. Because only the sensor nodes in the same tier communicate each other, less power is consumed and longer network life time is guaranteed. By a simulation method with NS-2, we evaluated our protocol. In dense nodes environments, MT-MAC protocol shows better results than S-MAC in terms of packet delivery rates throughput and energy consumption.

• Journal of Animal Science and Technology
• /
• v.48 no.2
• /
• pp.315-324
• /
• 2006

This research was conducted to clarify the characteristics of electrochemical decolorization of effluent discharged from a biological animal wastewater treatment process and to finally establish parameters or mode for optimum operation of electrolysis system. Average color unit of wastewater was about 1,200 and DSA(Dimensionally Stable Anode) was used as electrode. Experiments were performed with two different operation conditions or modes, fixed voltage-free current(Run A) and free voltage-fixed current(Run B). Color removal rate was proportional to the electrode area and electrical conductivity, and an equation subject to them at a condition of fixed voltage was derived as follows; Ct=C0ekt, k=[{0.0121×ａ(dm2)× c(mS/cm)}+0.0288], [where, C0: initial color, Ct: color unit after treatment for t, k: reaction coefficient, t: time(min.), ａ: electrode area, c: conductivity]. From the study on the effects of current density on color removal, it was revealed that the removal efficiency of color was function of the current density, showing direct proportion. However, when considered energy consumption rate, maintenance of low current density was an economical way. Based on the obtained results, it was concluded that supplementation of electrolyte is not necessary for the removal of color from the effluent of secondary treatment process and operation with the mode of free voltage-fixed current, rather than operation with fixed voltage-free current mode, would be an efficient way to increase the removal performance and capacity per consumed energy.

• Journal of Communications and Networks
• /
• v.14 no.6
• /
• pp.640-652
• /
• 2012

Many studies have investigated the smart grid architecture and communication models in the past few years. However, the communication model and architecture for a smart grid still remain unclear. Today's electric power distribution is very complex and maladapted because of the lack of efficient and cost-effective energy generation, distribution, and consumption management systems. A wireless smart grid communication system can play an important role in achieving these goals. In this paper, we describe a smart grid communication architecture in which we merge customers and distributors into a single domain. In the proposed architecture, all the home area networks, neighborhood area networks, and local electrical equipment form a local wireless mesh network (LWMN). Each device or meter can act as a source, router, or relay. The data generated in any node (device/meter) reaches the data collector via other nodes. The data collector transmits this data via the access point of a wide area network (WAN). Finally, data is transferred to the service provider or to the control center of the smart grid. We propose a wireless cooperative communication model for the LWMN.We deploy a limited number of smart relays to improve the performance of the network. A novel relay selection mechanism is also proposed to reduce the relay selection overhead. Simulation results show that our cooperative smart grid (coopSG) communication model improves the end-to-end packet delivery latency, throughput, and energy efficiency over both the Wang et al. and Niyato et al. models.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.70-75
• /
• 2014

This paper presents a IR-UWB(Impulse Radio Ultra-Wide Band) transceiver circuit for data communication and real time location system. The UWB receiver is designed to OOK(On-Off Keying) modulation for energy detection. The UWB pulse generator is designed by digital logic. And the Gaussian filter is adopted to reject side lobe in transmitter. The measured sensitivity of the receiver is -65 dBm at 4 GHz with 1 Mbps PRF(Pulse Repetition Frequency). And the measured energy efficiency per pulse is 20.6 pJ/bit. The current consumption of the receiver and transmitter including DA is 27.5 mA and 25.5 mA, respectively, at 1.8 V supply.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.51-57
• /
• 2020

WSN is a wirelessly configured network of sensor nodes with limited power such as batteries. If the sensor node's battery is exhausted, the node is no longer available. Therefore, if the network is to be used for a long time, energy consumption should be minimized. There are many Wireless Sensor Network Protocols to improve energy efficiency, including Cluster-based and chain-based Protocols. This paper seeks to examine the performance evaluation of routing protocols studied separately for the improvement of performance in wireless sensor network. The criteria for comparison were selected as the LEACH protocol, a representative hierarchical routing protocol, and the comparison targets considered CHEF and FLCFP and LEACH-DFL routing protocols with Fuzzy Logic. Various criteria for performance comparison were presented in this paper, and the performance was compared through simulation of each protocol. The purpose is to present a reference point for comparing the performance of other protocols through the performance comparison of CHEF, FLCFP, and LEACH-DFL, protocols with LEACH and Fuzzy Logic, and to provide additional design methods for improving the performance of protocols.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1589-1598
• /
• 2014

To support the WBAN, IEEE 802.15 Task Group 6 announced standardized documents on technical requirements of the PHY and MAC. In the IEEE 802.15.6 MAC protocol, CSMA/CA(Carrier Sense Multiple Access with Collision Avoidance) algorithm is performed based on the eight-level priorities according to the type of traffics of the periodic data from medical sensor nodes. Several nodes, which detected the changed bio signals, transmit emergency data at the same time, so latency could be higher than emergency latency and energy consumption will increase. In this thesis, we proposed a CSMA/CA algorithm in WBAN to solve these problems. Simulations are performed using a Castalia based on the OMNeT++ network simulation framework to estimate the performance of the proposed superframe and algorithms. Performance evaluation results show that the packet transmission success rate and energy efficiency are improved by reducing the probability of collision using the proposed MAC protocol.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.6
• /
• pp.482-489
• /
• 2014

This paper suggests the new network scanning algorithm that makes use of measurement pilot of IEEE 802.11k. The purpose of suggesting this algorithm is to improve the existing network scanning schemes. After introducing new algorithm, this paper shows the difference of time property and energy property between former scanning schemes and new scheme with simulation results. Passive scan has a merit of low-power consumption but it takes too long time to fulfill whole scanning. On the contrary, an advantage of active scan is speed but it consumes more battery power than passive scan. By using measurement pilot's smaller interval than beacon interval, the suggested algorithm can consume less power than active scan does, and also make shorter scanning delay than passive scan does.