• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2012

To arrange effectively artificial reefs for marine afforestation, tidal currents were analyzed by numerical experiments, and particle tracking based upon tidal currents were carried out to clarify the path of algae spore. The experiments were carried out by EFDC (Environmental Fluid Dynamics Code), and water column was vertically divided 10 layers. Tidal current patterns showed to be affected by main current at outside of study area, and circle currents of two were observed from analysis of residual currents. Particle tracking were experimented for 15 days at 2 installation places in which artificial reefs for marine afforestation would be deployed. According to the results of particle tracking experiment, particle movement at St.1 showed belt type along coastal line, and St.2 showed ellipse type at 300~500 m distant from coastal line. It suggest that artificial reefs for marine afforestation should be installed belt zone at station of St.1 and ellipse zone at St.2. Modelling algae transport was also tested to account for local dispersion of algae spore due to the suspended materials.

• Journal of Nutrition and Health
• /
• v.46 no.6
• /
• pp.521-530
• /
• 2013

Protein-energy malnutrition, PEM, and increased hs-CRP level are considered to be associated with increased risk of cardiovascular disease (CVD) in hemodialysis (HD) patients. This is commonly referred to as the vicious circle of malnutrition-inflammation-atherosclerosis cardiovascular disease (MIA syndrome) in chronic kidney disease (CKD). Low protein intake can decrease the serum level of albumin and increase inflammational markers; further, both low serum albumin and high hs-CRP are independent risk factors for all-cause mortality in HD patients. The aim of this study is comparing the serum levels of albumin and hs-CRP in HD patients according to the protein intake levels. The total number of subjects was 60 hemodialysis patients; they were grouped by dietary protein intake: low protein intake group (LPI, protein intake < 1.0 g/kg IBW, 11 men and 19 women) and adequate protein intake group (API, protein intake ${\geq}$ 1.0g/kg IBW, 12 men and 18 women). Blood biochemical parameters, nutrient intake, and dietary behaviors were compared between the LPI and API groups. The LPI group showed a significantly lower serum level of albumin and higher serum level of hs-CRP than the API group (p < 0.05). The LPI group showed a significantly lower intake of most nutrients than the API group (p < 0.05). Index of Nutritional Quality of most nutrients of the LPI and API groups were lower than 1.0. Dietary protein intake was positively correlated with the serum level of albumin (r = 0.306, p < 0.05) and negatively correlated with the serum level of hs-CRP (r = -0.435, p < 0.01). The serum level of hs-CRP was negatively correlated with that of albumin (r = -0.393, p < 0.01). According to these result, serum albumin and hs-CRP in HD patients were influenced by the protein intake levels. To prevent MIA syndrome, it is necessary to improve nutritional status, especially in protein and energy.

• Journal of Legislation Research
• /
• no.55
• /
• pp.57-94
• /
• 2018

Crisis of trust in Korean society, especially south-south conflicts among Korean political circle, civil society and peoples on the issue of the Korean peninsula policy driven by south Korean government, have weakened the sustainable and consistent energy of the policy for peace and unification of Korea peninsula. At the moment of drastic change of south-north relation in Korean peninsula, National agreement as a foundation of sustainable peace and unification policy has very important meaning. Because of this, national contract of unification as a kind of social concertation, has been demanded. National contract for peace and unification is an unprecedented process for making unofficial legal norm because it authorize quasi-legislative binding force on the agreement which is concluded by the Korean political circle, civil society and peoples for the peace and unification of Korean peninsula. National contract for peace and unification includes 'agreed aim and principles' for peace, prosperity and unification as well as process and result. And National contract for peace and unification, also is characterized long duration of aim achievement and openness of participating subjects. In terms of law, it will be legitimate source for comprehensive modification of international and internal law. In addition, The nature of National contract for peace and unification, as a people's law, should be considered as soft law which has the power to realize its contents through the enactment of legislation and policy. In order to guarantee the establishment and effectiveness of National contract for peace and unification, the setting of organization is need to determine the range of representatives, who participate in the process of contract making, procedure of contract and to carry out the contract after the conclusion of National contract for peace and unification. For the reason, the Council of National Contract for Peace and Unification as a independent administrative government committee and 'Act on National Contract for Peace and Unification' is needed.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.1
• /
• pp.51-61
• /
• 2014

It is necessary to perform a dynamic analysis to numerically evaluate the effect of blasting on nearby facilities. The blast load time history, which cannot be directly measured, is most often determined from empirical equation. The load has to be adjusted to account for various factors influencing the load and the frequency, but there is not a clear guideline on how to adjust the load. In this study, a series of 2D dynamic numerical analyses that simulates a closely monitored test blasting is performed, from which the blast load that matches the measured vibrations are derived. In the analyses, it is assumed that the hole generated by the blasting is in the form of a circle, and the load was applied normally to the wall of the opening. Special attention was given in selecting the damping ratio for the ground, since it has important influence on the wave propagation and attenuation characteristics of the blast induce waves. The damping ratio was selected such that it matches favorably with the attenuation curve of the measurement. The analyses demonstrate that the empirical blast load widely used in practice highly overstimates the vibration since it does not account for the energy loss due to rock fragmentation. If the empirical load is used without proper adjustment, the numerical analysis may seriously overstimate the predicted vibration, and thus has to be reduced in the analysis.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.320-325
• /
• 2003

The purpose of study was to investigate the effect of carbon dioxide laser on demineralization inhibition and rehardening of primary tooth enamel according to its power and irradiation time. 2mm diameter circle on the primary enamel surface was irradiated by defocused $10.6{\mu}m$ superpulse carbon dioxide laser at 6 Watt 2 seconds or at 3 Watt 8 seconds, before or after demineralization by Coca-Cola for 24 hours. Enamel surface change was measured by the Diagnodent. The results were analyzed with the former study results of 3 Watt 4 seconds and 6 Watt and 4 seconds. Diagnodent scores increased significantly after demineralization of irradiated enamel at 6W 2s or 3W 8s (P<0.05). Among the four groups, only 6W 4s group showed obvious demineralization inhibition effect. Diagnodent scores reduced significantly after 6W 2s or 3W 8s irradiation of demineralized enamel(P<0.05). Among the four groups, 6W 4s showed nearly complete rehardening effect, and the other groups showed partial effect. Tooth discoloration only occurred at 6W 4s. It seemed that caries inhibition and tooth discoloration depend on laser power more than total irradiation energy.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.847-853
• /
• 2011

In this study, a hybrid powder-extrusion process involving the control of temperature dwelling time for improving the formability of Zn-22Al powder was developed and the effect of dwelling time on the mechanical properties of a spur gear with a pitch circle having a diameter of 1.8 mm was investigated. General extrusion experiments were carried out at different temperatures such as 290, 300, and $310^{\circ}C$. Spur gears with good qualities and without any surface defects were obtained in the case of extrusion temperature of $310^{\circ}C$ and ball-milling duration of 32 h. The Vickers hardness distribution was non-uniform, and after the sintering process, an internal crack was generated because of the different deformation energy between gear central part and teeth. To overcome the abovementioned problems, research on controlling the dwelling time of the extrusion temperature in the powder-extrusion process was carried out. Good-quality spur gears were obtained when the dwelling time was 15 min.

• Journal of Veterinary Clinics
• /
• v.22 no.1
• /
• pp.21-25
• /
• 2005

This study was performed to assess therapeutic effect of the tibial plateau leveling osteotomy (TPLO) in dogs with experimentally transected cranial cruciate ligaments (CrCL). Nine healthy adult Beagle dogs were transected left CrCL under general anesthesia. The dogs were assigned to TPLO and non-TPLO control groups. The TPLO procedures for correcting the CrCL rupture in the left stifle of dogs were performed under sterile conditions. Before TPLO procedures, all dogs were screened by orthopedic and radiographic examinations. Dogs were lameness free for the previous three months, and when examined at the walk and trot on a hard surface, in a straight line and on a circle. Lateral and craniocaudal radiographs were done to confirm the soundness of the both knee joint in dogs and not detectable lesions were diagnosed. The dogs were intravenously injected with a 10 mci/kg of 99mTechnetium-methylene diphosphonate (99mTc-MDP) under general anesthesia. Scintigraphs were obtained using a large field of view gamma camera equipped a parallel-hole, low-energy about 3 hours after intravenous injection of 99mTc-MDP. Before CrCL transection and 4, 8, and 12 weeks after the procedures, scintigraphy were conducted. Bone uptake of the left stifle joint increased after the procedures in all dogs. When the bone uptake from the TPLO procedure was compared with that of the control, there was a significant difference (p < 0.05). At 12 weeks after the TPLO procedure, the dogs showed normal anatomical posture and gait. It is concluded that TPLO procedure was effective in reconstruct of the stifle joint in dogs with CrCL rupture.

• Journal of Korea Water Resources Association
• /
• v.49 no.12
• /
• pp.1015-1025
• /
• 2016

In general, manholes installed as urban drainage facilities are a variety forms such as straight path manholes, 90 degree bend manhole, three-way combining manhole, and four-way combining manhole. In particular, the surcharged flow at a four-way manholes installed in the downstream of urban sewer system is the main cause of the urban inundation caused by the energy loss. Therefore, it is necessary to analyze the flow characteristics and estimate the head loss coefficients at surcharged four-way combining manholes. The hydraulic experimental apparatus which can change the manhole shapes (square, circle) and flow ratios were installed to estimate the head loss coefficients. In the experiments, two inflows ($Q_m$, $Q_{lat}$) were varied from 0 to $4.8{\ell}/sec$ and 24 combinations were tested in total. The flow ratios $Q_{lat}/Q_{out}$ were varied from 0 to 1 for a total flow $Q_{out}$ ($Q_{out}=Q_m+2Q_{lat}$) of 2, 3, 4, and $4.8{\ell}/sec$, respectively. The variation of head losses were strongly influenced by the lateral inflow because the head loss coefficient increases as the flow ratios $Q_{lat}/Q_{out}$ increases. It was estimated head loss coefficients of the circular manhole is slightly lower than those of the square manhole. However, there was no significant difference of head loss as discharges change. The range of head loss coefficients at four-way combining manhole according to the change of the lateral inflow ratio was estimated to be 0.4 to 0.8. Also, the relation equations between the head loss coefficients (K) and the lateral inflow ratios ($Q_{lat}/Q_{out}$) were suggested in this paper.

• Tunnel and Underground Space
• /
• v.29 no.5
• /
• pp.332-345
• /
• 2019

Maximum dip vector of individual joint plane, which can be uniquely defined on the hemispherical projection plane, has been established by considering its dip and dip direction. A new stereographic projection method for the rock slope analysis which employs the maximum dip vector can intuitively predict the failure modes of rock slope. Since the maximum dip vector is uniquely projected on the maximum dip point of the great circle, the sliding direction of discontinuity plane can be recognized directly. By utilizing the maximum dip vector of discontinuity both the plane sliding and toppling directions of corresponding blocks can be discerned intuitively. Especially, by allocating the area of high dip maximum dip vector which can form the flanks of sliding block the potentiality for the formation of virtual sliding block has been estimated. Also, the potentiality of forming the triangular-sectioned sliding block has been determined by considering the dip angle of joint plane the dip direction of which is nearly opposite to that of the slope face. Safety factors of the different-shaped blocks of triangular section has been estimated and compared to the safety factor of the most hazardous block of rectangular section. For the wedge analysis the direction of crossline of two intersecting joint planes, which has same attribute of the maximum dip vector, is used so that wedge failures zone can be superimposed on the stereographic projection surface in which plane and toppling failure areas are already lineated. In addition the maximum dip vector zone of wedge top face has been delineated to extract the wedge top face-forming joint planes the orientation of which provides the vital information for the analysis of mechanical behavior of wedge block.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.174-175
• /
• 2012

(In, Ga) N-based III-nitride semiconductor materials have been viewed as the most promising materials for the applications of blue and green light emitting devices such as light-emitting diodes (LEDs) and laser diodes. Although the InGaN alloy can have wide range of visible wavelength by changing the In composition, it is very hard to grow high quality epilayers of In-rich InGaN because of the thermal instability as well as the large lattice and thermal mismatches. In order to avoid phase separation of InGaN, various kinds of structures of InGaN have been studied. If high-quality In-rich InGaN/GaN multiple quantum well (MQW) structures are available, it is expected to achieve highly efficient phosphor-free white LEDs. In this study, we proposed a novel InGaN double hetero-structure grown on GaN nano-pyramids to generate broad-band red-color emission with high quantum efficiency. In this work, we systematically studied the optical properties of the InGaN pyramid structures. The nano-sized hexagonal pyramid structures were grown on the n-type GaN template by metalorganic chemical vapor deposition. SiNx mask was formed on the n-type GaN template with uniformly patterned circle pattern by laser holography. GaN pyramid structures were selectively grown on the opening area of mask by lateral over-growth followed by growth of InGaN/GaN double hetero-structure. The bird's eye-view scanning electron microscope (SEM) image shows that uniform hexagonal pyramid structures are well arranged. We showed that the pyramid structures have high crystal quality and the thickness of InGaN is varied along the height of pyramids via transmission electron microscope. Because the InGaN/GaN double hetero-structure was grown on the nano-pyramid GaN and on the planar GaN, simultaneously, we investigated the comparative study of the optical properties. Photoluminescence (PL) spectra of nano-pyramid sample and planar sample measured at 10 K. Although the growth condition were exactly the same for two samples, the nano-pyramid sample have much lower energy emission centered at 615 nm, compared to 438 nm for planar sample. Moreover, nano-pyramid sample shows broad-band spectrum, which is originate from structural properties of nano-pyramid structure. To study thermal activation energy and potential fluctuation, we measured PL with changing temperature from 10 K to 300 K. We also measured PL with changing the excitation power from 48 ${\mu}W$ to 48 mW. We can discriminate the origin of the broad-band spectra from the defect-related yellow luminescence of GaN by carrying out PL excitation experiments. The nano-pyramid structure provided highly efficient broad-band red-color emission for the future applications of phosphor-free white LEDs.