• 대한기계학회논문집A
• /
• 제29권4호
• /
• pp.584-590
• /
• 2005

The effect of microstructure on mechanical behavior for Ti-6Al-4V alloy was studied. Two different kinds of specimens are prepared using heat treatments (rolled plate, $1050^{\circ}C)$ in order to Produce different microstructures. Various kinds of mechanical tests such as hardness, tensile, fatigue and fretting fatigue tests are performed for evaluation of mechanical properties with the changes of microstructures. Through these tests, the following conclusions are observed: 1) Microstructures are observed as equiaxed and $widmanst{\ddot{a}}ten$ microstructures respectively. 2) Impact absorbed energy is superior for the equiaxed microstructure, and the hardness and tensile strength are superior for the $widmanst{\ddot{a}}ten$ microstructure. 3) The fatigue endurance of $widmanst{\ddot{a}}ten$ microstritcture shows higher value than that of the equiaxed microstructure. 4) The fatigue endurance in fretting condition was reduced about $50{\%}$ from that of the non-fretting condition.

• 한국수소및신에너지학회논문집
• /
• 제27권4호
• /
• pp.341-348
• /
• 2016

The experiments related on structure and water electrolysis performance of HALE UAV stack were conducted in this study. Anode catalyst $IrRuO_2$ was prepared by Adam's fusion methods as 2~3 nm nano sized particles, and the cathode catalyst was used as commercial product of Premetek. The MEA (membrane electrode assembly) was manufactured by decal methods, anode and anode catalytic layers were prepared by electro-spray. HALE stack was composed of 5 multi-cells as $0.2Nm^3/hr$ hydrogen production rate with hydrogen pressure as 10 bar. The water electrolysis performance was investigated at atmospheric pressure and temperature of $55^{\circ}C$. Best performance of HALE UAV stack was recorded as cell voltage efficiency as 86%.

• 한국전문물리치료학회지
• /
• 제5권3호
• /
• pp.63-71
• /
• 1998

Trunk holding test (Sorensen test) appear to have more value than strength test in prediction the occurrence of low back pain. Electromyographic activity of trunk extensor muscles during these test may provide clues to the etiology of neuromuscular-based low back pain. This study investigated the difference in back muscle endurance between healthy adult men and women using surface electromyographic (EMG) power spectral analysis. Thirty hea1thy subjects (15 men and 15 women) performed an unsupported trunk holding test for 60 seconds. Recording surface electrodes were placed over the erector spinae medially and laterally at vertebral levels of $L_1$ and $L_5$. Slope of total frequency was evaluated using the MP100WSW Fast Fourier Transform spectrum analysis program. The slopes of all indices of back muscle fatigue, except right $L_5$, were significantly steeper in men than in women (p<0.05). Our results indicated that the trunk holding test using EMG power spectral analysis of erector spinae muscles is useful for the evaluation of fatigue rate of these muscles. Our results also showed a higher muscle endurance in healthy adult women than in men.

• 한국군사과학기술학회지
• /
• 제25권5호
• /
• pp.539-544
• /
• 2022

This research shows the test performance of a 6 kW-scale hybrid electric power system for the high endurance drone. The power system is composed of a two-stroke reciprocal engine, starter-generator and battery, and they are integrated as one power unit. The engine is designed to provide the house for holding the starter-generator at the end of a crankshaft in turn the engine and starter-generator can maintain the same speed during the operational period. In this way, the generated power is readily controlled by just manipulating an engine throttle movement. Moreover, the starter-generator can initiate an engine operation with an aid of battery power until the combustion process becomes stabilized. In consequence, integration mechanism between an engine and generator is simplified, which results in weight reduction achieved. The duty of back-up battery is to provide a starting power to generator via a system controller in addition to covering momentarily power shortage. Therefore, the electric power system is vindicated to provide 6 kW power through a ground test.

• 한국산학기술학회논문지
• /
• 제17권11호
• /
• pp.223-229
• /
• 2016

본 연구에서는 엔진의 밸브트레인에 적용되는 롤러 태핏 하우징의 냉간단조 공정을 개발하였다. 시제품을 제작하였으며, 태핏 하우징의 내구성 평가를 통하여 작동성을 확인하였다. 소재 시편의 압축시험을 통하여 태핏에 사용되는 소재의 물성을 확보하고 상용 소프트웨어인 Deform-3D을 이용하여 단조해석을 수행하였다. 해석결과를 바탕으로 냉간단조 공정을 설계하였으며, 실제 금형을 제작하고 시제품을 제작하였다. 제작한 시제품의 평가를 위하여 치수정밀도, 표면조도, 평행도, 동심도를 확인하였으며, 목표한 항목에 모두 부합하는 결과를 확인하였다. 또한 제품의 작동성 및 내구성 평가를 수행하기 위하여, 엔진 밸브트레인의 구동을 모사하는 별도의 시험장치 개발을 완료하였다. 디젤엔진의 아이들 상태를 가정하여 작동성을 평가하고, 엔진의 최고 회전수를 가정하여 내구성 시험을 진행하였다. 시험결과 태핏하우징의 마모는 시험 전, 후 외경 치수 0.002 mm 감소로, 미소한 마모를 보였다. 본 연구를 통하여 정밀 냉간단조 기술을 이용한 제품개발 프로세스를 정립하였다. 또한 본 연구에서 개발한 작동성 평가 시험기를 통해 밸브트레인용 부품의 작동성 및 내구성 평가 시험이 가능할 것으로 사료된다.

• 한국정밀공학회지
• /
• 제29권9호
• /
• pp.1026-1034
• /
• 2012

The purpose of this study was to verify the validation of effect on improvement of muscle strength unbalance according to exercise load deviation during rowing exercise. We performed evaluation of muscular activity and joint torque before the test. We recruited twenty subjects who one side's muscle strength is bigger in more 20% than other side. Subjects divided two groups. One is dominant left side and the other was dominant right side. Subjects performed rowing exercise in electric load deviation rowing equipment (Robo.gym, Humonic Co., Ltd., Daegu, Korea). Exercise performed four sets a day including 25 times a set, and three days a week. Measurements consist of evaluation of muscular activity and joint torque. Exercise load deviation adapted that different value of muscle strength in both arms multiplied 1RM% and added 1RM 50%. The results in adapted load deviation showed that the differences of maximal peak torque in 22.75% were getting increase significantly during exercise in 5.72%. This interpreted that rowing exercise with loading deviation types could provide muscle strength and muscular endurance exercise in same time for balance. Our study found out that loading deviation could provide muscle strength and muscular endurance exercise for improving muscle unbalance.

• Journal of Animal Science and Technology
• /
• 제59권1호
• /
• pp.2.1-2.6
• /
• 2017

Background: This study aimed to analyze the on heart rate, blood lactate concentration, packed cell volume (PCV) and hemoglobin (Hb) response after conducting exercise in endurance horses. Methods: A total of 20 healthy 3-9-years-old Jeju crossbreed mares ($5.95{\pm}2.24$ year) of age and $312.65{\pm}13.59kg$ of weight) currently participating the endurance competition were used. The field tests selected for the experiment was gallop (approximately 8.3 m/s) along the selected 2.5 km course (a natural forest trail, not artificial road; a closed loop course). The horses were divided into three groups according to their age; 3-4 years of age (G1, $3.29{\pm}0.49$ year), 6-7 years of age (G2, $6.42{\pm}0.53$), and 8-9 years of age (G3, $8.50{\pm}0.55$). The measurements times for the heart rate, blood lactate concentration, PCV, and Hb analysis were conducted before exercise (T0), shortly after exercise (T1), 15 min after exercise (T2), and 30 min after exercise (T3), respectively. Data was analyzed using an analysis of covariance (ANCOVA) for repeated measures with times and groups. Results: The results of the comparison depending on the passage of rest time after exercise suggest that the heart rate and blood lactate concentration of three groups at T2 significantly decreased compared to T1 (p < 0.001). PCV of the G2 and G3 groups were significantly decreased at T2 compared to T1 (p < 0.01). Hb values at G2 (p < 0.01) and G3 (p < 0.001) groups were significantly decreased at T2 as compared to T1. However, heart rate, blood lactate concentration, PCV and Hb level at T1 showed no difference in the comparison of horses from different age groups with the exception of G3 group in terms of heart rate. Conclusion: The physiologic and hematological responses of horses during recovery time after 2,500 m exercise with gallop were no significant difference among the groups. These data are useful as a response evaluation method for training of endurance horses.

• 한국산학기술학회논문지
• /
• 제14권9호
• /
• pp.4437-4446
• /
• 2013

본 연구의 목적은 택시운전자를 위한 심뇌혈관질환 예방 프로그램을 개발하고 생리적 변수(혈압, 혈당, 혈청 지질), 신체적 변수(체지방율, 근지구력, 심폐지구력, 균형)에 미치는 효과를 검증하고자 시도하였다. 본 연구는 프로그램 개발과 효과 평가의 2단계로 진행하였다. 1단계는 택시 운전자를 위한 심뇌혈관질환 예방 프로그램을 개발하기 위해 2011년 3월 2일부터 4월 30일까지 택시 운전자 321명을 대상으로 건강상태 및 생활습관, 건강관리 요구도를 설문조사하였으며 이를 근거로 프로그램을 개발하였다. 2단계는 개발된 프로그램의 효과를 검증하기 위해 2011년 6월 1일부터 10월 5일까지 택시 운전자 51명에게 12주 동안 운동 1주 3회, 질병교육 4회, 영양 상담 2회 실시하였다. 연구결과는 프로그램 전보다 후에 혈압, 혈당, 혈청지질은 통계적으로 유의하게 감소하지 않았으나 체지방율은 유의하게 감소하였으며(t=3.108, p=.003), 근지구력(t=-7.621, p<.001), 심폐지구력(t=-3.388, p=.001), 균형(t=-4.133, p<.001)은 통계적으로 유의하게 증가한 것으로 나타났다. 이와 같은 결과를 근거로 운동, 질환교육, 영양상담으로 구성된 프로그램을 고혈압, 당뇨, 비만 등 심뇌혈관질환 선행질환 유병율이 높은 택시 운전자를 위한 심뇌혈관질환 예방프로그램으로 제안하고자 한다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 추계학술대회
• /
• pp.45-46
• /
• 1995

Hip articulation fusion is to relieve hip pain from pathologic joint problem. The questionnaire is followed by hip articulation fusion surgery in order to evaluate the degree of pain, function, mobility. However, this subjective evaluation is controversial. The patient endurance of pain which affect function and mobility of lower extremity call not assess objectively. Therefore, gait analysis is necessary for objective evaluation. This study is to evaluate objectively function and mobility after hip articulation fusion surgery using gait analysis.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.239-245
• /
• 2005

Through the fatigue test of plastic gears using polyacetal polymer, this research aims at providing basic data for not only specifying operation conditions of plastic gears, but also designing dimensions of plastic gears with giving fatigue life and the estimated equation of fatigue life of plastic gears. That is, from the fatigue life curves, the estimated equation of fatigue life of plastic gears is taken out. For the estimated equation of fatigue life of plastic gears, this research provides two test methods; one is preserving non-limited temperature of tooth flank, the other is preserving limited temperature of tooth flank. As results, how the temperature of tooth flank affects the fatigue life is shown. In addition, based on the endurance limit, the essential factors of the unit load and K-factor are determined, which are needed in the design of gear by bending strength and surface durability.