• Title/Summary/Keyword: Endurance Test

Search Result 549, Processing Time 0.03 seconds

A Development of Forklift Shift and Constant Speed Endurance Test Controller for Dynamometer Test (다이나모 시험용 지게차 변속 및 정속 내구시험 제어기 개발)

  • Jung, G.H.;Lee, G.H.
    • Transactions of The Korea Fluid Power Systems Society
    • /
    • v.4 no.3
    • /
    • pp.13-21
    • /
    • 2007
  • A forklift is a motive machine powered by LPG, diesel engine or electric motors. The internal combustion engine type forklift is equipped with automatic transmission to meet the required drive load as well as the easy operation of the vehicle. This paper deals with the shift control and endurance test controller which is developed for the functional test of the newly designed automatic transmission on a dynamometer test bench. Its major function is to control the proportional solenoid currents, which is directly related to clutch pressures, for the given reference current trajectory during shift and sequential operation of shift schedule designed for the durability test at each gear. It also has the ability to monitor all the necessary test data through RS232 communication and log them to disk files. The current controller of embedded system is designed from the identified dynamics of solenoid coil and the current reference can be easily modified with a user interface software on PC so as to match the shift data by experiments.

  • PDF

Fatigue experiment of stud welded on steel plate for a new bridge deck system

  • Ahn, Jin-Hee;Kim, Sang-Hyo;Jeong, Youn-Ju
    • Steel and Composite Structures
    • /
    • v.7 no.5
    • /
    • pp.391-404
    • /
    • 2007
  • This paper presents push-out tests of stud shear connectors to examine their fatigue behavior for developing a new composite bridge deck system. The fifteen push-out specimens of D16 mm stud welded on 9 mm steel plate were fabricated according to Eurocode-4, and a series of fatigue endurance test and residual strength test were performed. Additionally, the stiffness and strength variations by cyclic loading were compared. The push-out test, when the stiffness reduction ratio of the specimens was 0.95 under cyclic load, resulted in the failure of the studs. The stiffness variation of the push-out specimens additionally showed that the application of cyclic loads reduced the residual strength. The fatigue strength of the shear connectors were compared with the design values specified in the Eurocode-4, ASSHTO LRFD and JSSC codes. The comparison result showed that the fatigue endurance of the specimens satisfies the design values of these codes.

Effects of Cervical Instability on Function of Deep Neck Flexor Muscle and Muscle Tonus of Neck Muscles (목 불안정성이 깊은목굽힘근의 기능과 목 근육들의 긴장도에 미치는 영향)

  • Lee, Sung-Hyun;Seo, Dong-Kwon
    • Journal of The Korean Society of Integrative Medicine
    • /
    • v.9 no.1
    • /
    • pp.123-131
    • /
    • 2021
  • Purpose : The time spent using smart devices is constantly increasing, particularly in recent times. Using smart devices for a long time with an incorrect posture may lead to cerebral palsy (CP), instability, and abnormal muscle tone. Therefore, we aimed to investigate the relationships among cervical instability, deep neck flexor (DNF) activity, range of motion (ROM), and muscle tonus. Methods : Fifty subjects with CP participated in this study, and they were physiotherapists at W Hospital in Daejeon. Those who voluntarily participated in the research were selected as candidates who fulfilled the selection criteria. According to an instability test, 25 subjects were assigned to the instability and control groups. All subjects first underwent the instability test to be allocated to the appropriate group. Those in the instability group tested positive on the instability test. The Neck Disability Index (NDI), ROM, muscle tone, and DNF activity were measured to evaluate their relationships. The DNF strength and endurance were measured using a cranio-cervical flexion test. The upper trapezius (UT), sternocleidomastoid (SCM), and suboccipital (SO) muscle tones were measured using a contact soft tissue tone measuring instrument. The statistical significance level was set to .05. Results : There were significant differences in the flexion, extension, and rotation of the cervical ROM (CROM) between the two groups (p<.05). The SCM, UT, and SO muscle tones were significantly different between the two groups (p<.05). The DNF strength and endurance showed a significant difference between the two groups (p<.05). Conclusion : We found that there were significant increases in the CROM and muscle tone and decrease in the DNF strength and endurance in the instability group. This indicated that cervical instability is affected by the DNF strength and endurance. We may recommend DNF exercises in cases of cervical instability in clinical environments.

Relationship between Endurance Times and Frequency Parameters in Surface EMG during Isotonic Contraction Exercises (등장성 수축운동시 표피근전도의 주파수파라미터와 근지구력시간과의 상관성)

  • Lee, Sangsik;Go, Jaewook;Jang, Jeehun;Park, Wonyeop;Lee, Kiyoung
    • Journal of Biomedical Engineering Research
    • /
    • v.33 no.3
    • /
    • pp.135-140
    • /
    • 2012
  • Previous investigators have shown that the frequency compression is related to the muscle fatigue and the decreasing conduction velocity of muscle fibers. The aim of the present study was to investigate the relationship between endurance times and frequency parameters such as mean power frequency and median frequency in the surface EMG signal during isotonic contractions. Eight healthy subjects performed voluntary isotonic contractions of biceps Brachii muscle until their endurance times which were determined when the subject could no longer follow the contraction cycle. The regressive slopes of mean power frequency and median frequency were used to describe the frequency compression of the surface EMG signal, and to test the predictability of endurance time. As results of experiment, significant correlations were found between endurance time and the regressive slopes of mean power frequency and mean frequency computed over 50%Tend of endurance time.

Increasing Endurance Performance of Tiltrotor UAV Using Extended Wing (확장날개를 이용한 틸트로터 무인기 체공성능 향상)

  • Lee, Myeong Kyu;Lee, Chi-Hoon
    • Journal of Aerospace System Engineering
    • /
    • v.10 no.1
    • /
    • pp.111-117
    • /
    • 2016
  • A new configuration of tiltrotor UAV previously suggested by Korea Aerospace Research Institute (KARI) for the purpose of increasing the endurance performance in airplane mode flight has extended wings attached to the nacelle and rotated with the nacelle according to the flight modes. In this research, the effectiveness of the extended wing on the enhancement of the endurance performance of KARI tiltrotor UAV (TR60) was analytically investigated based on CFD analysis results. Flight tests and ground tests of measuring the fuel consumption were also conducted to directly compare the endurance performance for the two configurations of TR60 baseline and TR60 extended-wing model.

A Study on the Actual Condition of Scaffolding Construction in Accordance with the Revision of Safety Standards (비계공사 안전기준 개정에 따른 현장적용 실태에 관한 연구)

  • Kim, Ja Yeon;Cho, Youn Hee
    • Journal of the Korean Society of Safety
    • /
    • v.35 no.4
    • /
    • pp.15-22
    • /
    • 2020
  • Scaffolding works are demolished after this structure is completed, and safety accidents often occur because they are installed differently from legal standards or frequently change during work. Therefore, in order to strengthen the safety of scaffolding, the Ministry of Land, Infrastructure and Transport required a need for design standards for temporary facilities that can systematically prevent and solve large-scale safety accidents that are repeatedly increasing during temporary construction. It has been enacted, and some contents have been revised for the past three years. However, construction site personnel do not know or know the revised matters, but often install scaffolding by the installer's experience rather than complying with relevant laws and regulations. It is the situation that the ground strength test of the foundation ground for the load applied to the floor of the column is omitted in most sites. Therefore, this study grasped the actual situation on the degree of recognition of the revised laws and regulations of the construction site and the foundation-based treatment of the floor working load of the scaffolding column, and derived problems. In addition, we intend to provide reference materials for the endurance test according to the ground conditions to small-scale small sites where it is difficult to conduct the test by carrying out the endurance test of the scaffolding ground according to the revised standards.

Fatigue Strength Evaluation of LCV Leaf spring Considering Road Load Response II (도로 하중조건을 고려한 상용차 판스프링의 피로강도 평가 II)

  • Sohn, Il-Seon;Bae, Dong-Ho;Jung, Won-Seok;Jung, Won-Wook;Park, Sun-Cheol
    • Proceedings of the KSME Conference
    • /
    • 2003.11a
    • /
    • pp.1127-1132
    • /
    • 2003
  • Suspension system of vehicle have enough endurance during its life time to protect passenger. Spring is one of major part of vehicle. Thus, a fatigue strength evaluation for leaf spring based on road load response was carried out. At first, strain of leaf spring is measured on the city condition and proving ground condition. And next, the damage analysis of road load response data was carried out. And fatigue test of leaf spring were also carried out. Based on -N life relation, fatigue life of leaf spring was evaluated at belgian mode, city mode and drawing test specification. After that, it is compared the design life of leaf spring and evaluated fatigue life by belgian mode, city mode and drawing test specification. From the above, the maximum load-fatigue life relation of leaf spring was defined by test. and new test target of belgian mode and city mode was proposed to accept design specification of leaf spring. It is expect that proposed test target can verify leaf spring fatigue endurance at specific road condition.

  • PDF

Compatibility test of a non-instrumented irradiation test capsule for the HANARO test reactor (환형소결체 하나로 조사시험용 무계장 캡슐의 연구로 설치 적합성시험)

  • Lee, Kang-Hee;Kim, Dae-Ho;Chun, Tae-Hyun;Kim, Hyung-Kyu
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2008.11a
    • /
    • pp.226-229
    • /
    • 2008
  • To investigate an in-pile behavior of the newly developed DUO fuel pellet, the irradiation test will be carried out in the domestic test reactor. Irradiation test capsule for the HANARO reactor, which is a specially designed equipment used for material, irradiation and creep test, must satisfy the operational requirement on the hydraulic characteristics and structural integrity. In this study, a pressure drop, a flow-induced vibration and a short-term endurance test for the newly developed non-instrumented test capsule were carried out using FIVPET as a out-pile evaluation test. The test results show that the new test rig satisfy the HANARO operational requirement with sufficient margin.

  • PDF

Development of In-tank Pressure Regulator and Solenoid Valve (내장형 레귤레이터 및 솔레노이드 개발)

  • Lee, Jun-Hyuk;Lim, Tae-Hoo;Kim, Kyung-Nam;Shim, Sang-Hak
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2007.11a
    • /
    • pp.188-191
    • /
    • 2007
  • This paper shows the Development of In-tank pressure regulator and Solenoid Valve used in FCV(Fuel Cell Vehicle). We have developed new type of Regulator and Solenoid through analysis of the structure and characteristics of component of FCS(Fuel Cell System) from the advanced technology. Now it is possible to localize the component by making use of the development of Regulator and Solenoid made by us. Regulator and Solenoid is a equipment to control hydrogen pressure supplied into a stack. Therefore, outlet pressure, a flow of fluid and temperature are important parameters according to a inlet pressure. And leak test, endurance test and burst test should be done to guarantee the performance and safety of Regulator and Solenoid used in the fuel of high pressure. Also, Hydrogen friendly materials are applied to inner parts of the Regulator, Solenoid and weight reduction is done to cost saving in part not related to performance. As a result, we have proven the good performance and reliability in endurance of Regulator, Solenoid and will make an development in performance as well as durability to ensure industrialization.

  • PDF

Effect on Endurance Improving of Mixture of the Extracts of Watermelon and Octacosanol (Octacosanol과 박과식물 추출물을 주성분으로 하는 혼합물의 지구력 증진 효과)

  • Lim, Hyun-Woo;Kim, Sung-Kyu;Lee, Min-Won
    • YAKHAK HOEJI
    • /
    • v.49 no.6
    • /
    • pp.465-470
    • /
    • 2005
  • Octacosanol is known to enhance endurance activities, control cholesterol in body and improve the function of cardiopulmonary. Citrulline, which is main compound of watermelon, is known to improve angiectasia through stimulating production of nitric oxide. To improve endurance activity swimming test on rats was carried out using four samples such as 1$\%$ octacosanol, citrulline, the extracts of barks of watermelon and products, mixture of 1$\%$ octacosanol and the extracts of barks of watermelon (6 : 4). Biochemical assays on the liver and serum of tested rats were also performed using commercial analysis kits. In result, it was shown that swimming time of III group increased by 26$\%$ and that of V group was increased by 22$\%$ at the swimming test. As a result of biological assays on the liver and serum of tested rats it was possible to confirm stability of toxicity When compared with creatine kinase of control group (549.11$\pm$39.15 U/l) citrulline (644.11 $\pm$50.67 U/l) and products group (646.00$\pm$46.99 U/l) were largely increased. When compared with inorganic phosphate of control group (12.01$\pm$0.75 mg/이), citrulline (13.03$\pm$0.94 mg/dl) and products group (12.90$\pm$0.55 mg/dl) showed similar results. Also, when compared with lactic acid and glucose of control group (152.91 $\pm$ 13.45, 103.00$\pm$ 8.69 mg/dl), citrulline (125.53$\pm$15.54, 83.75$\pm$7.29 mg/dl) and products group (135.26$\pm$11.50, 78.57$\pm$9.79 mg/dl) were largely decreased. As these test results, it was determined that 1$\%$ octacosanol and extracts of barks of watermelon had some effect of improving endurance activity. Futhermore, it was thought that it could be used as source of functional food.