• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.981-983
• /
• 2000

Linear induction motors have static and dynamic end effects due to its finite core length, so that per-phase impedances are asymmetric and the air gap flux distribution is distorted. Because of these points the d-q equivalent circuit model considering both end effects has not been exactly completed. So this paper proposes a characteristic analysis method considering both static and dynamic end effect of the LIM. This method is to utilize asymmetric d-q equivalent circuit model with dynamic end effect coefficient. As a result, it is shown that the simulation results have a good agreement with experimental ones.

• Journal of Hospice and Palliative Care
• /
• 제23권3호
• /
• pp.139-150
• /
• 2020

Purpose: The purpose of this study was to investigate the levels of end-of-life care competency; knowledge, attitudes, and experiences regarding advance directives; perceptions of good death; and end-of-life care obstacles and supportive behaviors among tertiary care nurses. Methods: The participants were 150 nurses at a tertiary hospital in Jinju, Korea. The data collected using a questionnaire were analyzed using descriptive statistics, the t-test, analysis of variance, Pearson correlation coefficients, and stepwise multiple regression in SPSS for Windows version 24.0. Results: The mean (±SD) score of end-of-life care competency was 3.63 (±0.53) on a 5-point scale. A significant difference in end-of-life care competency was found according to whether nurses had experienced the death of a family member or acquaintance (P=0.029). According to stepwise multiple regression analysis, the factors affecting end-of-life care competency were the frequency of end-of-life care supportive behaviors (β=0.38, P<0.001), experience with advance directives (β=0.29, P<0.001), and marriage (β=0.15, P=0.039). This model had an explanatory power of 27.9% (F=18.87, P<0.001). Conclusion: In order to improve nurses' end-of-life care competency, it is important to strengthen end-of-life care supportive behaviors by exposing nurses to those behaviors and providing frequent experience with advance directives.

• 인터넷정보학회지
• /
• 제14권3호
• /
• pp.58-67
• /
• 2013

An essential prerequisite for negotiating governance of 'internet,' a world of 'end to end' nature, is to guarantee end-users' participation. Internet Governance Forum (IGF), the outcome of World Summit on the Information Society(WSIS) Tunis Agenda, has played an important role as a representative mulitistakeholder - based governance model, which puts emphasis on wide range participation of stakeholders. Notwithstanding multistakeholderism materialized in IGF has been challenged, IGF itself is a unique place for participation to broad internet governance discourse, as all voices get hearing grounded on openness, inclusion, and transparency, quite distinct from the multilateral negotiation based model such as 'Conference on Cyberspace.' Therefore civil society which represents end-users' interest, as a crucial stakeholder of internet governance, should establish more strategic and coordinated approach to IGF itself as well as reformation discourse of internet governance. In this regard, civil society groups of Korea, began with hosting workshops and Open Forum at the 2013 IGF in Bali, Indonesia. This report also describes the detailed activities of Korean civil society group in 2013 IGF.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.877-882
• /
• 2001

A finite element analysis of end-to-end artery/PTFE anastomosis has been presented in this study to evaluate the distribution of compliance and stresses in the vicinity of the anastomosis due to any mismatch in compliance characteristics. The artery wall was assumed to be made of linear isotropic material in this simplified model and a nonlinear analysis and convergency study with respect to increasing meshed element numbers were performed with a mean artery pressure loading of the artery-PTFE model. Also, sub-modeling method was introduced to progress the accuracy of the finite element analysis. The results are as follow : 1. A hypercompliant zone on the artery side was observed around 4.0mm from the anastomosis and a high hoop stresses in the wall of artery and PTFE was dominent. 2. An artery displays large deformation so that nonlinear analysis and sub-modeling method was used. 3. An anastomosis with the thinner thickness and larger diameter PTFE (C type) could reduce the compliance disagreement.

• Steel and Composite Structures
• /
• 제35권4호
• /
• pp.579-598
• /
• 2020

Consideration of the panel zone (PZ) deformations in the analysis of steel moment frames (SMFs) has a substantial effect on structural response. One way to include the PZ effect on the structural response is Krawinkler's PZ model, which is one of the best and conventional models. However, modeling of Krawinkler's PZ model has its complexity, and finding an alternative procedure for PZ modeling is of interest. In this study, an efficient model is proposed to simplify Krawinkler's PZ model into an Adjusted Rigid-End Zone (AREZ). In this way, the rigid-end-zone dimensions of the beam and column elements are defined through an appropriate rigid-end-zone factor. The dimensions of this region depend on the PZ stiffness, beam(s) and columns' specifications, and connection joint configuration. Thus, to obtain a relationship for the AREZ model, which yields the dimensions of the rigid-end zone, the story drift of an SMF with Krawinkler's PZ model is equalized with the story drift of the same structure with the AREZ model. Then, the degree of accuracy of the resulting relationship is examined in several connections of generic SMFs. Also, in order to demonstrate the applicability of the proposed model in SMFs, several SMFs ranging from 3- to 30-story representing low- to high-rise buildings are examined through linear static and dynamic time history analysis. Furthermore, non-linear dynamic analyses of three SMFs conducted to validate the degree of accuracy of the proposed model in the non-linear analysis of SMFs. Analytical results show that there is considerable conformity between inter-story drift ratio (IDR) results of the SMFs with Krawinkler's PZ model and those of the centerline SMFs with AREZ.

• Advances in Computational Design
• /
• 제2권2호
• /
• pp.147-168
• /
• 2017

Over the past couple decades, externally bonded fiber reinforced polymer (FRP) composites have emerged as a repair and strengthening material for many concrete infrastructure applications. This paper presents an analytical investigation of the use of carbon FRP (CFRP) for a specific problem that occurs in concrete bridge girders wherein the girder ends are damaged by excessive exposure to deicing salts and numerous freezing/thawing cycles. A 3D finite element (FE) model of a full scale prestressed concrete (PC) I-girder is used to investigate the effect of damage to the cover concrete and stirrups in the end region of the girder. Parametric studies are performed using externally bonded CFRP shear laminates to determine the most effective repair schemes for the damaged end region under a short shear span-to-depth ratio. Experimental results on shear pull off tests of CFRP laminates that have undergone accelerated aging are used to calibrate a bond stress-slip model for the interface between the FRP and concrete substrate and approximate the reduced bond stress-slip properties associated with exposure to the environment that causes this type of end region damage. The results of these analyses indicate that this particular application of this material can be effective in recovering the original strength of PC bridge girders with damaged end regions, even after environmental aging.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.77-82
• /
• 2003

In end milling process, undeformed chip thickness and cutting force vary periodically with phase change of the tool. Recently, a model has been proposed to simulate the shear and friction characteristics of an up-end milling process in terms of the equivalent oblique cutting to this. In the current study, the varying undeformed chip thickness and the cutting forces in a down-end milling process have been replaced with the equivalent ones of oblique cutting. And, the down-end milling characteristics of SM45C has been compared with that of the up-end milling previously presented with different helix angles.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.223-228
• /
• 2003

In end milling processes, characterized by use of rotating tools, the underformed chip thickness varies periodically with the phase change of tool. In current study, as a new approach to analyse shear behaviors In the shear plane and chip-tool friction behavior chip-tool contact region during an end milling process. In this approach, an up-end milling process is transformed into an equivalent oblique cutting process. Experimental investigations for two sets of cutting tests i.e.. up-end milling and the equivalent oblique cutting test were performed to verify the presented model.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1088-1093
• /
• 2010

The Smart bi-directional pile load test with variable end plate overcomes the shortcoming of the Osterberg cell test. It is possible that the ultimate bearing capacity of piles can be known by using two different end plates. The first step is to measure end bearing capacity with smaller end plate and the second step is similar to the conventional O-cell test. In this study, model test was performed to evaluate the smart bi-directional pile load test in sand. Vertical displacement of the model pile were messured at the axial loading condition.

• 정보과학회 논문지
• /
• 제44권1호
• /
• pp.36-43
• /
• 2017

의미역 결정 연구에 있어 구문 분석 정보는 술어-논항 사이의 의존 관계를 포함하고 있기 때문에 의미역 결정 성능 향상에 큰 도움이 된다. 그러나 의미역 결정 이전에 구문 분석을 수행해야 하는 비용(overhead)이 발생하게 되고, 구문 분석 단계에서 발생하는 오류를 그대로 답습하는 단점이 있다. 이러한 문제점을 해결하기 위해 본 논문에서는 구문 분석 정보를 제외한 형태소 분석 정보만을 사용하는 End-to-end SRL 방식의 한국어 의미역 결정 시스템을 제안하고, 순차 데이터 모델링에 적합한 LSTM RNN을 확장한 Stacked Bidirectional LSTM-CRFs 모델을 적용해 구문 분석 정보 없이 기존 연구보다 더 높은 성능을 얻을 수 있음을 보인다.