• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.85-91
• /
• 2021

The DAPA (Defense Acquisition Program Administration) has been operating the DQ mark certification since 2012 to certify the superior technology and quality of munitions. On the other hand, the current DQ mark certification can not directly provide DQ mark certification to software because it is impossible to verify the quality of software alone. Therefore, this study analyzed domestic/overseas software quality evaluation/certification standards to find a way to verify the quality of software in the DQ mark certification. Among them, the method of applying the GS certification according to the international standard ISO/IEC 25000 series to the DQ mark certification was suggested as an improvement plan, and DQ mark certification verified the quality of software and provided certification. An attempt was made to expand the certification scope of DQ mark certification. This paper proposes that the DQ mark can be given to the system software by introducing GS certification to the DQ mark certification. To this end, an improved procedure for omitting the factory audit and verification by submitting a GS certificate for product evaluation is proposed. This is expected to increase defense exports using the granted DQ mark and improve the quality of defense software products through GS certification.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.1
• /
• pp.112-125
• /
• 2021

Marine spatial planning(MSP) designates the marine as nine kinds of use zones for the systematic and rational management of marine spaces. One of them is the fishery protection zone, which is necessary for the sustainable production of fishery products, including the protection and fosterage of fishing activities. This study intends to quantitatively identify the fishing activity space, one of the elements necessary for the designation of fisheries protection zones, by mapping of fishery activities using V-Pass data and deriving the fishery activity concentrated zone. To this end, pre-processing of V-Pass data was performed, such as constructing a dataset that combines static and dynamic information, calculating the speed of fishing vessels, extracting fishing activity points, and removing data in non-fishing activity zone. Finally, using the selected V-Pass point data, a fishery activity map was made by kernel density estimation, and the concentrated space of fishery activity was analyzed. In addition, it was confirmed that there is a difference in the spatial distribution of fishing activities according to the type of fishing vessel and the season. The pre-processing technique of large volume V-Pass data and the mapping method of fishing activities performed through this study are expected to contribute to the study of spatial characteristics evaluation of fishing activities in the future.

• Journal of KIBIM
• /
• v.10 no.1
• /
• pp.9-22
• /
• 2020

Recently, BIM has been extended to infrastructures such as roads and bridges, and the demand for BIM standard development for ports is increasing internationally. Due to the low level of utilization of classification system and drawing standards compared to other infrastructures, and the closed nature of national security facilities, ports have insufficient level of connection and sharing environment among external systems or users. In addition, since the standardization of data for port facilities is not made, it is still necessary to establish an independent DB for each system and to ensure interoperability of data between these systems since it does not have a shared environment among similar data. Therefore, the purpose of this study is to develop and verify IFC, the international standard for BIM, in order to cope with the BIM environment and to be commonly used in the design, construction, and maintenance of port facilities. To this end, we build a standard schema with port-specific Express Notation according to buildingSMART International's standard development methodology. First, domestic and international reference model standards were analyzed to derive components such as space and facilities of port facilities. Based on this, the components of the port facility were derived through the codification, categorization, and normalization process developed by the research team. This was extended based on the port BIM object classification system developed by the research team. Normalization results were verified by designers and associations. Then, IFC schema construction was based on Express-G data modeling based on IFC 4 * 2 Candidate, which is a bridge candidate standard based on IFC4 (ISO16739), and IFC 4 * 3 Draft, which is developed by buildingSMART International. The final schema was validated using the commercialized validation tool. In addition, in order to verify the structural verification of the port IFC schema, the transformation process was verified by converting the caisson model into a Part21 file. In the future, this result will not only be used as a delivery standard for port BIM products, but will also be applied as a linkage standard between systems and a common data format for port BIM platforms when BIM is used in the maintenance phase. In particular, it is expected to be used as a core standard for data exchange in the port maintenance stage.

• Journal of Digital Convergence
• /
• v.19 no.11
• /
• pp.425-438
• /
• 2021

The purpose of this study is to analyze local cultural festivals hosted contact-free in the corona era and to suggest the direction for sustainable festivals in the post-corona era. To this end, by analyzing the cases of well-known festivals held contact-free in 2020 and 2021, we tried to get implications for the festivals in the post-corona era from there. As a result of this study, contact-free festivals had the following characteristics. First, the on-tact method, which produces and transmits a video or allows interaction through real-time participation, was prominent. Second, in order to compensate for the shortcomings of the contact-free method, various efforts have been made to enable on-tact experience by making and delivering experience kits in the case of experiential elements of the festival in advance. Third, communication was secured through real-time comments, and fourth, products were sold through the Internet and live commerce channels, and a certain effect was obtained. In particular, in the case of online festivals, there is a problem of loss of the sense of place of the festival, but there are cases of online festivals with more participation than offline festivals. It is judged that the problem of how to achieve this will become a reference material for the future development of contact-free festival contents.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.2
• /
• pp.99-109
• /
• 2021

The purpose of this paper is to look at web entertainment in terms of marketing and analyze how consumers in Korea and abroad feel about it. To this end, methods such as literature research, case studies, and consumer interviews were used. The main conclusions of this paper are as follows. First of all, through the case of "Run BTS," the web entertainment program actively reflects the needs of viewers on entertainment content by utilizing the unique interactions of web entertainment in terms of products. In terms of price, web entertainment operated a paid service that contained more diverse contents. However, the degree of satisfaction with paid services was different for each age group or income of viewers. In terms of distribution, web entertainment can position viewers much more clearly than conventional TV entertainment, has strong communication with viewers, and is relatively free from political conflict or censorship in overseas exports. Finally, in terms of public relations, web entertainment is promoted in various ways to fans who are the mainstay of existing viewers, but public relations for various viewers other than fans are relatively weak. Based on the above analysis, this paper proposed ways to improve consumers of web entertainment by region, customized marketing by age, professional window for consumers to directly express their opinions on content, and wide promotion through various media.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.510-514
• /
• 2022

In this paper, we propose the development of high-sensitivity low-end radiation measuring sensor module. The proposed measurement sensor module is a scintillator + photomultiplier(SiPM) sensor optimization structure design, amplification and filter and control circuit design for sensor driver, control circuit design including short-distance communication, sensor mechanism design and manufacturing, and GUI development applied to prototypes consists of, etc. The scintillator + photomultiplier(SiPM) sensor optimization structure design is designed by checking the characteristics of the scintillator and the photomultiplier (SiPM) for the sensor structure design. Amplification, filter and control circuit design for sensor driver is designed to process fine scintillation signal generated by radiation with a scintillator using SiPM. Control circuit design including short-distance communication is designed to enable data transmission through MCU design to support short-range wireless communication function and wired communication support. The sensor mechanism design and manufacture is designed so that the glare generated by wrapping a reflective paper (mirroring) on the outside of the plastic scintillator is reflected to increase the efficiency in order to transmit the fine scintillation signal generated from the plastic scintillator to the photomultiplier(SiPM). The GUI development applied to the prototype expresses the date and time at the top according to each screen and allows the measurement unit and time, seconds, alarm level, communication status, battery capacity, etc. to be expressed. In order to evaluate the performance of the proposed system, the results of experiments conducted by an authorized testing institute showed that the radiation dose measurement range was 30 𝜇Sv/h ~ 10 mSv/h, so the results are the same as the highest level among products sold commercially at domestic and foreign. In addition, it was confirmed that the measurement uncertainty of ±7.4% was measured, and normal operation was performed under the international standard ±15%.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.5
• /
• pp.72-79
• /
• 2003

In reliability based design(RBD) method, the distribution characteristics of mechanical properties of material are basic input variable. Therefore, distribution type and parameters of mechanical properties should be determined accurately. Until now, the properties were derived from tests with small, clear specimens. However, the test conditions should emulate as nearly as possible the way in which the timber would be used in practice and the test results should, as closely as possible, reflect the structural end use conditions to which the timber products would be subjected. In this study, structural timbers (38mm by 140mm, 3.0m long) were graded by visual assessment of growth characteristics and defects. And then bending tests were conducted on 498 structural size timbers. For each grade, the distribution type and the parameters of mechanical properties were determined for each grade. For the determination of best-fit distribution type, comparing of square error between distribution types and KS test were conducted. Best-fit distribution type of bending strength(MOR) is weibull distribution for all grade. In case of MOE, normal distribution is best-fit.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.6
• /
• pp.485-491
• /
• 2022

Intravenous injection is the most frequent invasive treatment for inpatients and is widely used for parenteral nutrition administration and blood products, and more than 1 billion procedures are used for peripheral catheter insertion, blood collection, and other IV therapy per year. Intravenous injection is one of the difficult procedures to be performed only by trained nurses with intravenous injection training, and failure can lead to thrombosis and hematoma or nerve damage to the vein. Accordingly, studies on auxiliary equipment capable of visualizing the vein structure of the back of the hand or arm are being published to reduce errors during intravenous injection. This study is a study on the performance difference according to the number of LEDs irradiating the 850nm wavelength band on a vein detector that visualizes the vein during intravenous injection. Four LED PCBs were produced by attaching NIR filters to CCD and CMOS camera lenses irradiated on the skin to acquire images, sharpen the acquired images using image processing algorithms, and project the sharpened images onto the skin. After that, each PCB was attached to the front end of the vein detector to detect the vein image and create a performance comparison questionnaire based on the vein image obtained for performance evaluation. The survey was conducted on 20 nurses working at K Hospital.

• Journal of Digital Convergence
• /
• v.20 no.5
• /
• pp.599-608
• /
• 2022

There has been criticism that the government-led makerspace did not reflect the actual demand of makers, so there was a limit to performance creation. In this regard, the study aims to diagnose the current status and problems of makerspace and to suggest the implication to respond to policy demand. To this end, we analyzed the current status of makerspace by utilizing the government documents. Then, we conducted a survey of SMEs related to ICT devices that experienced makerspace, and analyzed their opinions on D·N·A technology demand, management difficulties, and governments' support policies. As results, the study proposed several improvement measures to upgrade makerspace as a digital conversion platform as follows. First, due to the nature of the existing industry for introducing D·N·A technology, there is a limit for companies to enter the market on their own, so comprehensive support from the government is needed. Second, it is necessary to establish and expand an empirical test bed for the development of new products and services so that various types of metaverse contents can be discovered and digital transformation convergence models of existing businesses can be derived. Third, by modifying the support method to operate the makerspace as a platform that implements the government-led start-up support policy, boldly transfer what the private sector can do well to the private sector. The participants of Industry·University·Institute Collaboration should freely share ideas and help the common problem be solved. Based on the problems and the findings for improvement, it is expected that the current makerspace would be upgraded to a digital conversion platform suitable for the demand of the field.

• Journal of Life Science
• /
• v.32 no.2
• /
• pp.119-124
• /
• 2022

To effectively isolate acetic acid bacteria for producing makgeolli vinegar, various products were researched, and Acetobacter pasteurianus CK-1, a strain that is excellent in acetic acid production, was finally isolated. The optimal growth temperature of the isolated strain was confirmed to be 30℃, and it grew well in the pH range of 5.5~6.5, with optimal growth at pH 6. A. pasteurianus CK-1 had the most active proliferation when the initial ethanol concentration in the medium was 4%, and growth was possible even at an ethanol concentration of 7%. When inoculating the isolated strain into makgeolli to induce acetic acid fermentation, the pH at the beginning of fermentation was 3.54, which was gradually lowered to 2.77 after 18 days of fermentation. The acidity was 0.75% at the beginning of fermentation and gradually started to increase from the 4th day of fermentation. The final acidity at the end of fermentation was 5.54%. In the vinegar fermented by inoculating A. pasteurianus CK-1, acetic acid content was detected to be as high as 3,575.7±48.6 mg%, and the malic acid and citric acid contents were 2,150.8±27.6 and 55.8±3.7 mg%, respectively. Further, it was confirmed that the content and ratio of the organic acids produced significantly differed depending on the type of inoculated bacterial strain. During acetic acid fermentation, the populations of yeast and A. pasteurianus CK-1 were inversely changed. In the initial stage of fermentation, yeast dominated, and after 10 days of fermentation, A. pasteurianus CK-1 slowly proliferated and reached stationary phase.