• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.5
• /
• pp.501-506
• /
• 2013

A hold-up time compensation circuit is proposed to get high efficiency of the front-end phase-shifted full bridge DC/DC converter. The proposed circuit can make the phase-shifted full bridge front-end DC/DC converter built with 0.5 duty ratio so that the conduction loss of the primary side and voltage stress across rectifier in the secondary side are reduced and the higher efficiency can be obtained. Furthermore, the requirement of an output filter significantly can diminish due to the perfect filtered waveform. A 12V/100A prototype has been made and experimental results are given to verify the theoretic analysis and detailed features.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.978-983
• /
• 2009

This paper analyzed longitudinal end effect occurred in linear induction motor by using I-d direct solution and its result is verified by 2-d Finite Element Method(FEM). Longitudinal end effect of linear induction motor caused by magnetic discontinuity in primary core and electric discontinuity in armature winding has been investigated by many researchers. In this paper, 1-d direct solution and boundary conditions proposed by Yamamura and Nasar is used to analyze end effect of linear induction motor and its solution is verified by 2-d FEM.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.207-217
• /
• 1999

The purpose of this study was to compare the retentive forces of various types of clasps for removable orthodontic appliances for primary and mixed dentition. Seven metal models of a single tooth and two teeth were made, including maxillary left primary canine, first primary molar, second primary molar and first molar. Retentive forces of Adams clasp, circumferential clasp(C clasp), Jackson clasp, Duyzing clasp, arrowhead clasp, ball clasp, eyelet clasp, and triangular clasp were measured by Universal Testing Machine(Zwick Z020, Germany). The obtained results were as follows. 1. Jackson clasp and Adams clasp showed the highest retentive force among single tooth clasps. 2. C clasp showed the lowest retentive force, and there was no statistically significant difference in retentive force between mesial end C clasp and distal end C clasp. 3. Eyelet clasp showed the highest, and ball clasp showed the lowest retentive farce among clasps for interdental undercut. 4. Triangular clasp showed higher retentive force than ball clasp.

• Advances in pediatric surgery
• /
• v.13 no.2
• /
• pp.105-111
• /
• 2007

We reviewed the records of 25 patients who were re-operated upon after primary repair of esophageal atresia with or without fistula at the Department of Pediatric Surgery, Seoul National University Children's Hospital, from January 1997 to March 2007. Types of the esophageal atresia anomalies were Gross type A in 5 patients, C in 18, and E in 2. The indications for re-operation were anastomosis stricture (n = 14), tracheo-bronchial remnant (n = 4), persistent anastomosis leakage (n = 3), recurrent tracheo-esophageal fistula (n = 2) and esophageal web (n = 2). The interval between primary and secondary surgery was from 48 days to 26 years 5 months (mean: 2 years and 4 months). Four patients required a third operation. The interval between the second and third operation was between 1 year 1 month and 3 year 10 month (mean: 2 years 5 months). Mean follow up period after last operation was 35 months (1 years-8 years 6 months). The secondary surgery was end-to-end esophageal anastomosis in 15, esophagoplasty in 5, gastric tube replacement in 5. After secondary operation, 6 patients had anastomosis stricture (4 patients were relieved of the symptoms by balloon dilatation, 2 patients underwent tertiary operation). Five patients had leakage (sealed on conservative management in all). Two patients had recurrent tracheo-esophagel fistula (1 patient received chemical cauterization and 1 patient underwent tertiary operation). Currently, only one patient has feeding problems. There were no mortalities. Secondary esophageal surgery after primary surgery for esophageal atresia was effective and safe, should be positively considered when complications do not respond to nonoperative therapy.

• Journal of Oriental Neuropsychiatry
• /
• v.34 no.4
• /
• pp.359-368
• /
• 2023

Objectives: This study aims to establish a Korean medicine doctor's range of services in the dementia relief primary care system based on the previously developed dementia clinical practice guidelines (CPGs). Developing a dementia relief primary care Clinical Pathway (CP) can aid clinically when the Korean medicine primary care doctor conducts treatment. Methods: We analyzed Dementia Korean Medicine Primary Care Model Data and then applied CP Methodology to develop the configuration of the Korean Medicine Primary Care Model. For patients with Alzheimer's dementia (AD), vascular dementia (VD), and mild cognitive impairment (MCI), the Korean Medicine Primary Care Model focuses on improving cognitive function, everyday living abilities and easing symptoms through interventions described in CPGs. The contents of the draft model later include references to already-existing CPs. Results: The study sites were chosen as Korean medical clinics connected to primary care physicians in the dementia-friendly model. The CP used a time task matrix version to arrange the clinical chronology, which included all examinations, diagnoses, and treatment procedures, from the initial appointment to follow-ups and the end of therapy. Conclusions: It anticipates that Korean primary care doctors familiar with dementia can use the offered therapies for the first time by creating the dementia Korean medicine primary care model in this study. This is expected to maximize the range of medical services provided by Korean medicine and improve the standard of medical treatment.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.5
• /
• pp.629-634
• /
• 2012

This study was conducted to improve the yield of mature oocytes from in vitro-culture of ovarian primary follicles by optimizing follicle retrieval from neonatal mice of different ages. Primary follicles of 75 to $99{\mu}m$ in diameter were collected daily from 7- to 14-day-old neonatal mice, and subsequently cultured in ${\alpha}$-MEM medium. Number of primary follicles isolated, growth of the follicle during in vitro-culture and maturation of intrafollicular oocytes were monitored. Overall, mean number of preantral follicles per animal was improved from 10.7 to 88.7 as the age of follicle donors was increased from 7 to 14-day-old. Number of primary follicles was increased gradually up to 11-day-old (35.7 follicle per an animal), then reduced to 29 in 14-day-old (p = 0.0013). More follicles retrieved from 10-day-old or 11-day-old females maintained their morphological normality at the end of primary culture than the follicles retrieved from 9-day-old. Of those cultured, primary follicles retrieved from 11-day-old mice yielded largest larger number of early secondary follicles than the follicles retrieved from in the other ages (39 vs. 13 to 29%). More than 3.3-times increase (0.86 to 2.86; p<0.05) in an average number of mature oocytes per animal was observed in the group of 11-day-old, compared with 9-day-old. However, no difference was found in the percentage of primary follicles developing into the pseudoantral stage (21 to 30%; p = 0.5222) and in the percentage of oocytes mucified (32 to 39%; p = 0.5792). In conclusion, a positive correlation between retrieval time and follicle growth was detected, which influences the efficiency to derive mature oocytes by follicle culture.

• Journal of Species Research
• /
• v.5 no.1
• /
• pp.31-48
• /
• 2016

Twelve new species of two genera Smenospongia and Cacospongia (Demospongia: Dictyoceratida: Thorectidae) are described from Gageodo Island and Ulleungdo Island, Korea. Of these, ten new species of the Smenospongia are distinguished from the other nine reported species of the genus by the skeletal structure and sponge colour. Primary fibres of the genus Smenospongia are mostly dense, dark colour, and invisible inside of fibres, but they are mostly cored detritus and echinated with spicules. Especially, the end of primary fibres at the surface shows densely cored with spicules. All these new species changed the colour. Two new species of the genus Cacospongia are compared with nine other reported species. In skeletal structure, primary fibres of the genus Cacospongia are light colour, visible inside and more heavily cored with spicules and sands. The skeleton of this genus has large meshes. The colour of the genus Cacospongia does not change.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.8 no.1
• /
• pp.47-53
• /
• 1981

Author have studied with electron microscope on the effect of biscuit solution dissolved in natural saliva on the enamel surface of the primary teeth. Four of the teeth were natural primary teeth and the other four teeth were treated in acidulated phosphate fluoride during four minute. The obtained results were as follows; 1. The pH value of the solution was decreased according to the time passed, and gradually became 3.75 at the end of 48 hours. 2. Natural teeth appeared normal enamel surface appearance during first 12 hours, and at 24 hours, it appeared some degree of decalcified appearance near the enamel rods and surfaces. 3. The decalcified appearances of the enamel surfaces of the fluoride treated teeth were not significant compared with the fluoride untreated teeth. 4. Streptococci of the enamel surface were increased according to the time passed.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.3
• /
• pp.327-337
• /
• 2020

Junctional neurulation represents the most recent adjunct to the well-known sequential embryological processes of primary and secondary neurulation. While its exact molecular processes, occurring at the end of primary and the beginning of secondary neurulation, are still being actively investigated, its pathological counterpart -junctional neural tube defect (JNTD)- had been described in 2017 based on three patients whose well-formed secondary neural tube, the conus, is widely separated from its corresponding primary neural tube and functionally disconnected from corticospinal control from above. Several other cases conforming to this bizarre neural tube arrangement have since appeared in the literature, reinforcing the validity of this entity. The cardinal clinical, neuroimaging, and electrophysiological features of JNTD, and the hypothesis of its embryogenetic mechanism, form part of this review.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.233-240
• /
• 1996

Analyses of the viscous and end effects on electromagnetic (EM) pumps of annular linear induction type for the sodium coolant circulation in Liquid Metal Fast Breeder Reactors have been carried out based on the MHD laminar flow analysis and the electromagnetic field theory. A one-dimensional MHD analysis for the liquid metal flowing through an annular channel has been performed on the basis of a simplified model of equivalent current sheets instead of three-phase currents in the discrete primary windings. The calculations show that the developed pressure difference resulted from electromagnetic and viscous forces in the liquid metal is expressed in terms of the slip, and that the viscous loss effects are negligible compared with electromagnetic driving forces except in the low-slip region where the pumps operate with very high flow velocities comparable with the synchronous velocity of the electromagnetic fields, which is not applicable to the practical EM pumps. A two-dimensional electromagnetic field analysis based on an equivalent current sheet model has found the vector potentials in closed form by means of the Fourier transform method. The resultant magnetic fields and driving forces exerted on the liquid metal reveal that the end effects due to finiteness of the pump length are formidable. In addition, a two-dimensional numerical analysis for vector potentials has been performed by the SOR iterative method on a realistic EM pump model with discretely-distributed currents in the primary windings. The numerical computations for the distributions of magnetic fields and developed pressure differences along the pump axial length also show considerable end effects at both inlet and outlet ends, especially at high flow velocities. Calculations of each magnetic force contribution indicate that the end effects are originated from the magnetic force caused by the induced current ( u x B ) generated by the liquid metal movement across the magnetic field rather than the one (E) produced by externally applied magnetic fields by three-phase winding currents. It is concluded that since the influences of the end effects in addition to viscous losses are extensive particularly in high-velocity operations of the EM pumps, it is necessary to find ways to suppress them, such as proper selection of the pump parameters and compensation of the end effects.