• 대한토목학회논문집
• /
• 제10권4호
• /
• pp.11-24
• /
• 1990

본 연구는 RC 뼈대구조물의 실제적인 단부경계조건을 고려한 RC 기둥에 대한 인접부재의 강성을 비선형 거동과 부합시켜 해석하였으며, 인접부재의 단부구속 효과를 고려한 편심축하중을 받는 장주의 극한강도와 거동을 해석하기 위한 해석모델을 정립하여 반복법을 이용한 수치적분법에 의하여 1차로 이론 해석을 하였다. 그리고, 계속 RC 기둥의 극한강도와 거동에 영향을 주는 매개변수를 해석모델을 이용 연구하고져 한다.

• 대한기계학회논문집
• /
• 제16권12호
• /
• pp.2241-2251
• /
• 1992

본 연구에서는 Fig.1에서와 같은 축대칭 평판과 속이 찬 실린더(이하 단순히 실린더라고만 칭함)가 붙은 구조물에서 실린더의 끝단효과가 응력분포에 미치는 영향 을 해석해를 사용하여 고려해 보고자 한다. 이를 위해 얇은 평판에서는 2차원 고전 평판 이론을, 등방성 실린더에서는 끝단효과를 고려하기 위해서 3차원 선형 탄성이론 을 사용하고자 한다. 실린더와 평판의 접합부에서, 평판의 이차원 해와 실린더의 3 차원 해를 연결시키기 위해 접합부에서의 실린더의 유연성을 나타내는 유연성 행렬을 유도한다. 이러한 실린더의 유연성 행렬은 원형평판의 내부 경계조건으로 사용되는 데, 이와 유사한 해석절차는 셀구조물에 활용되어 왔다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.726-731
• /
• 2004

Bogie is the connection device between carbody and wheel in railway vehicles. It is the core part that exert a important effect on the passenger safety and running safety. Bogie largely consists of bogie frame, suspension, brake, wheel set. Static and Dynamic load have acted on it complexly. When the bogie is designed, finite element method, static load test, fatigue test, running test should be considered. Some bogie frame of high speed railway freight car have the problem. It's end beam was cracked. The crack of the end beam have a bad effect on brake system. In that case, the cars would be in danger of derailment.

• Journal of Plant Biotechnology
• /
• 제6권4호
• /
• pp.247-252
• /
• 2004

In vitro cultures of watermelon were treated with antimitotic agent colchicine to induce ploidy alterations, particularly the induction of tetraploids. Explants cotyledon, embryonic end of seed, transverse sections of epicotyl and hypocotyl were cultured on MS media supplemented with BA ($1{\mu}M$) and colchicine ($0.01\%,\;0.05\%\;and\;0.1\%$). Explants were subcultured on colchicine free media after 4 and 7 days. Colchicine had negative effect on in vitro regeneration but this exhibited explants related response. However, hypocotyl section of seedlings induced maximum callus on $0.01\%$ colchicine. Shoot proliferation was more in cotyledon explants cultured on colchicine ($0.01\%$) for four days. Maximum root induction and root number were recorded in embryonic end explants. Overall, cotyledon and embryonic end explants, and low colchicine concentration ($0.01\%$) was found optimal in watermelon regeneration.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.985-988
• /
• 1997

In end milling process, the undeformed chip section area and cutting forces vary periodically with phase change of the tool. However the real undeformed chip section area deviates from the geometrically ideal one owing to cutter runout and tool shape error. In this study ,a method of estimating the real undeformed chip section area which reflects cutter runout and tool shape error was presented in up end milling process using measured cutting forces. Size effect was identified from the analysis of specific cutting resistance obtained by using the modified undeformed chip section area.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.276-279
• /
• 2003

The superconducting synchronous machine(S.S.M) including generator and motor has different electromagnetic structure from the conventional machine. With the help of superconductor having much higher operating current density than normal conductor, S.S.M can eliminate most of iron core filling inside of the conventional machine. This air-cored structure could be analysed and designed theoretically based on 2-dimensional(2-D) magnetic field distribution assuming that the windings are extended infinitely toward the axial direction. However the actual structure of S.S.M has the end regions interconnecting the straight parts of the same cross-section with the 2-D model. Therefore, this actual 3-D model has smaller field distribution than the 2-D model. In this paper, we consider the effect of the end regions on the output of a HTS model motor and suggest more accurate design approach through comparison of 2-D and 3-D magnetic field analysis.

• 대한전기학회논문지
• /
• 제40권5호
• /
• pp.470-478
• /
• 1991

In this study, a variety of characteristics were shown experimentally under mechanically unbalnced states expected in a practicl system that linear motor is used as a driving motor of magneticlly levitated transit and the design criterion of the linear motor has been proposed. Since, with slip being at 0.1, end effect was reduced a little to increase thrust about 6.14 percents in case thatsinusoidal current conducted 5[A] in short coil at each end of linear motor for compensation of it, if the ratio of sinusoidl current versus input currents is adjusted properly, it is thought that this method small be effective one. And if the gap of exit region is bigger than that of entry region, end effect will be reduced. As a result, more effective driving will be obtained.

• 한국가구학회지
• /
• 제11권1호
• /
• pp.61-68
• /
• 2000

This study was carried out to investigate the effect of grain and veneer thickness on drying rate, required energy consumption, and drying defects such as checking, end waving, and burning during a far-infrared radiation drying process of decorative veneers of hard maple and beech. Most of the veneer could be dried from green to in-use moisture content within 30 to 360 seconds. The drying rates were significantly affected by veneer thickness, but there was little difference between edge-and flat-sliced veneers. The formation of checking during drying test was none or very slight. The percentages of the veneers defected by checks were higher in the flat-sliced veneers than in the edge-sliced veneers. The maximum end wavinesses in the flat-sliced veneers were almost 1.6 to 3 times larger than that in the edge-sliced veneers. All veneers were fee from burned marks during drying test.

• Wind and Structures
• /
• 제7권6호
• /
• pp.359-372
• /
• 2004

Wind tunnel model studies were carried out to determine the wind load distribution on tributary areas near the gable-end of large, low-rise buildings with high pitch planar and curved roof shapes. Background pressure fluctuations on each tributary area are described by a series of uncorrelated modes given by the eigenvectors of the force covariance matrix. Analysis of eigenvalues shows that the dominant first mode contributes around 40% to the fluctuating pressures, and the eigenvector mode-shape generally follows the mean pressure distribution. The first mode contributes significantly to the fluctuating load effect, when its influence line is similar to the mode-shape. For such cases, the effective static pressure distribution closely follows the mean pressure distribution on the tributary area, and the quasi-static method would provide a good estimate of peak load effects.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2007년도 한국컴퓨터종합학술대회논문집 Vol.34 No.1 (A)
• /
• pp.177-178
• /
• 2007