• 한국주거학회논문집
• /
• 제6권2호
• /
• pp.171-180
• /
• 1995

This paper tries to define the characteristics of windows frame built in the end of Koryu dynasty to the early period of Chosun dynasty. The windows frame is found both in temples and in Maeng's house. It is thus proved that the frame was a general one prevailed in that time without regard to function and region. And it proves to be the original form of windows frame of temples and houses in the middle or the end of Chosun dynasty.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권4호
• /
• pp.219-223
• /
• 2002

The actual behavior of joint is traditionally disregarded in steel frame design. In fact, the structural analysis of steel frames is generally carried out by assuming that joints fulfil the ideal condition of either a hinge or a fixed-end restraints. In this way, calculations are made somewhat simpler, but the structural model is not able to reflect the actual structural response. Therefore, steel frame classification system for estimation or analysis about behavior of steel frame should be established, and range that each connections belongs should be divided definitely. This research presents realistic and practical moment-rotation relation through investigation and analysis of steel frame beam-to-column classification system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.361-364
• /
• 2005

Some bogie frames manufactured in 1999, 2000 year have the fatal problem. Three or four years later, the cracked end beam among them have discovered in 2002, 2003 year. The crack situation of the end beam have a bad effect on brake system. In that case, the cars would be in danger of derailment. To improve the end beam, a research of covering the whole field of welded type bogie frame was started. Main line real tests were performed at Young-Dong line. The stress of main positions for bogie frame was measured. Also up-down direction and left-right direction vibration acceleration of the bogie frame were measured. At this time the tests were performed for the three types bogie. The test result concludes that the crack cause of the end beam is not brake load but vibration at running mainly. It is estimated that the life of the improved car which end beam reinforced is safe within the car permitted life(25 years). The improvement methods of the end beam are presented by construction modification, parts modification. The integrity evaluation is inspected by analysis the real line test results, the improvement methods of the end beam.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1323-1326
• /
• 2004

A bogie frame of welded type have some problems. Some end beam has cracked. The cracks have profound influence on the safe freight service. The bogie consists of a frame, suspensions, brakes and wheel sets. Various analyses including a numerical simulation using a finite element method, a static load test, a fatigue test, and running test should be carried out to design the bogie. However cracks have been found at some end beams of the bogies mounted on the freight cars running with the high speed. The cracks of the end beam results in deterioration of the brake performance and the running safety. Numerical simulations and dynamic tests are carried out to figure out the causes of cracks in the existing bogie, and the vibrational characteristics of the improved bogie are compared with those of the conventional one. In this reports, the vibration characteristics were dealed with the most pressing matters for the solution of the end beam crack.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.155-161
• /
• 2007

A bogie frame is typical safty part of railway vehicle. Main performance of a bogie frame is to support a car body and passenger weight and transfer traction and braking force. This paper is to evaluate the static strength and fatigue strength for the end trailer bogie with UIC 615-4 code. Therefore stress analysis of the end trailer bogie frame has been performed for various loading condition according to the UIC 615-4 code and haigh diagram is used for evaluation of fatigue strength. By the results of these analysis, static and fatigue strength of the end trailer bogie is satisfied with a applied criterion.

• 정보처리학회논문지C
• /
• 제11C권6호
• /
• pp.787-798
• /
• 2004

네트워크 가용 대역폭의 확보와 전송 효율성에 대한 고려는 고속/대용량 데이터의 처리를 위해 중요한 요소 기술이다. 대형 프레임의 사용은 TCP의 처리율 향상과 시스템 부하를 감소시켜 전송 효율성을 크게 향상 시킨다. 이러한 대형 프레임의 영향은 LAN 상황 및 시스템 측면에 국한되어 연구되어 왔고 경쟁 트래픽들과의 상관관계에 대한 논의는 충분히 고려되지 않고 있다. 본 논문에서는 다양한 네트워크 환경 하에서 대형 프레임이 트래픽 경로를 공유하는 경쟁 트래픽에 미치는 영향을 네트워크 모의실험을 통해 분석했다. 실험 결과를 통해 대형 프레임의 자원 선점 특성을 완화하기 위해서 가용대역폭의 확보가 중요하며 무손실, 저지연 환경이 대형 프레임을 이용한 종단 간 성능을 크게 향상시킴을 확인한다.

• Coupled systems mechanics
• /
• 제7권5호
• /
• pp.555-581
• /
• 2018

The moment-resistant steel frames are frequently used as a load-bearing structure of buildings. Global response of a moment-resistant frame structure strongly depends on connections behavior, which can significantly influence the response and load-bearing capacity of a steel frame structure. The analysis of a steel frame with included joints behavior is the main focus of this work. In particular, we analyze the behavior of two connection types through experimental tests, and we propose numerical beam model capable of representing connection behavior. The six experimental tests, under monotonic and cyclic loading, are performed for two different types of structural connections: end plate connection with an extended plate and end plate connection. The proposed damage-plasticity model of Reissner beam is able to capture both hardening and softening response under monotonic and cyclic loading. This model has 18 constitutive parameters, whose identification requires an elaborate procedure, which we illustrate in this work. We also present appropriate loading program and arrangement of measuring equipment, which is crucial for successful identification of constitutive parameters. Finally, throughout several practical examples, we illustrate that the steel structure connections are very important for correct prediction of the global steel frame structure response.

• 한국정보통신학회논문지
• /
• 제6권2호
• /
• pp.236-247
• /
• 2002

ATM망에서 큐 서비스 방식에서는 상위 프레임과 하위 프레임을 따로 정의하여 대역폭 할당과 전송 지연 보장을 분리할 수 있기 때문에 종단간 전송한계에서 QoS를 보장 할 수 있는 단순화한 큐 서비스 구현을 제안하였다. 제안한 큐 서비스 방식은 실시간 트래픽과 비실시간 트래픽을 나누어 저장하기 때문 에 연결별 트래픽 조절기 없이도 지연 지터 특성이 개선되었다. 제안된 큐 서비스 방식을 이용하여 연결 수락 제어는 트래픽 왜곡의 영향을 계산할 수 없는 트래픽 왜곡의 영향이 실재로 존재한다는 가정 하에 트래픽 왜곡에 대한 영향에 종단간 지연을 보장함으로 서 연결 수락 가능 범위를 다양한 프레임의 길이에 대해 나타내었으며, 프레임의 길이가 클수록 제안된 큐 서비스 방식의 연결 수 락 범위가 지연 EDD방식과 비교해서 많은 차이를 보이지만 프레임의 길이를 점차 줄여갈수록 연결 수락 가능 범위가 지연 EDD 방식에 근접함을 나타내었다.

• Journal of information and communication convergence engineering
• /
• 제14권1호
• /
• pp.21-25
• /
• 2016

N-screen is a promising technology to improve support for multimedia multicasting, content sharing, content mobility, media scalability, and seamless mobility. In this paper, the WiMedia distributed-MAC (D-MAC) protocol is adopted for development of a seamless N-screen wireless service. Furthermore, to provide a multi-hop, one source multi-use N-screen service through point to point streaming in a seamless D-MAC protocol, a dynamic multi-frame transmission technology is proposed. In this technology, a dynamic time slot allocation scheme and a multi-hop resource reservation scheme are combined. In the proposed dynamic time slot allocation scheme, two thresholds, a hard threshold and a soft threshold, are included to satisfy the power consumption and delay requirements. A multi-frame DRP reservation scheme is proposed to minimize end-to-end delay during the multi-hop transmissions between N-screen devices. The proposed dynamic multi-frame transmission scheme enhances N-screen performance in terms of the multi-hop link establishment success rate and link establishment time compared to the conventional WiMedia D-MAC system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.378-383
• /
• 2004

Bogie is the connection device between carbody and wheel. It is the core part that exert a important effect on the passenger safety and running safety. Bogie largely consist of bogie frame, suspension, brake, wheel set. Static and Dynamic load have acted on it complexly. So when the bogie is designed, finite element method, static load test, fatigue test running test should be considered. Some bogie frame of high speed railway freight car have the problem. It's end beam was cracked. The crack of the end beam have a bad effect on brake system. ROTEM co. made an improved end beam and applied one set to freight car. this report showed the vibration characteristic which was compared conventional bogie to improved bogie for running safety.