• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.33-33
• /
• 2009

This study is to develop the resistance welding apparatus and investigate the welding characteristics of Zircaloy-4 end-plate of fuel bundle in the cases of the resistance welding and the laser beam welding. The welding parameters which affect the weld nugget and the torque values have been also compared. The effect of the torque strength of end-plate welding using by the resistance welding and the laser beam welding has been studied and optimum conditions of Zircaloy-4 end-plate welding have been found. Futhermore, micro-structures and micro-hardness of the resistance welded specimens have been also compared.

• 대한토목학회논문집
• /
• 제14권6호
• /
• pp.1405-1415
• /
• 1994

탄소성(彈塑性) 변형경화(變形硬化) 거동(擧動)을 하는 흙은 토질(土質)의 상태(狀態)와 시험조건(試驗條件)에 따라 다양(多樣)한 응력경로(應力經路)를 갖는다. 체적비(體積比) ${\upsilon}$인 흙을 주응력공간(主應力空間)에서 표시(表示)하면 불규칙육각형(不規則六角形)피라밋에 캡을 씌운 형상(形狀)이다. 캡은 ${\upsilon}$값이 변(變)하면 그 크기가 달라지나 형상(形狀)은 항상 닮은 꼴이며 소성체적변형(塑性體積變形)의 증감(增減)에 따라 이동(移動)이 결정된다. 이와 같은 토질특성(土質特性)을 반영하여 현재(現在)까지 많은 학자(學者)들이 캡모델을 연구발표(硏究發表)하였으며 본(本) 연구(硏究)에서는 비선형(非線形) 탄성변형(彈性變形) 경화(硬化) 소성(塑性) 캡과 Mohr-Coulomb의 파괴곡면(破壞曲面)을 접합(接合)한 흙의 구성(構成) 모델(M-C 캡모델)의 함수식(函數式)을 유도(誘導)하였다. 변형경화(變形硬化) 소성(塑性) 캡모델을 사용(使用)한 해석(解析)의 결과(結果)에 의하면 정규압밀(正規壓密) 상태(狀態)에서는 전단(剪斷)을 통한 경화(硬化)와 소성(塑性)흐름(캡의 이동(移動))의 형상(形狀)을 보여주고 있으나 과압밀상태(過壓密狀態)의 전단(剪斷)에서는 파괴포락선(破壞包絡線)에 도달할 때까지 탄성거동(彈性擧動)을 보이고 캡은 이동(移動)하지 않았다.

• Journal of Biosystems Engineering
• /
• 제26권4호
• /
• pp.331-336
• /
• 2001

This study was to develop a kerosene flame weeder. An air compressor was driven though the PTO of a tractor to provide necessary air for fuel combustion and proper pressure to supply fuel from fuel tank to the nozzle. It was found that the flame was extinguished very easily by wind and vibration of the tractor. This trouble could be solved by attaching a burner cap, which is a modified venturi tube, at the end of the nozzle. The constructed flame weeder was tested for the weeding capability in the prepared field. Weed extinction rate and weight decrease rate were analysed. Measured maximum flame temperature was 1,121$\^{C}$ when the fuel consumption was 13.41 kg/h and fuel supply pressure was 88.2 kPa. The maximum temperature occurred at 20cm from the front end the burner, and it decreased to 46$\^{C}$ as the distance increased to 110cm. The flame length of up to 70cm, where the flame temperature was higher than 372$\^{C}$, would be used for weeding purpose. Weed extinction rate and weight decreasing rate increased as the fuel consumption increased. The flame weeder was evaluated to be a practical weeder through improvement as the weed extinction rate and weight decrease rate were analysed to be 75% and 85%, respectively when the fuel consumption was 116.87kg/ha.

• Applied Microscopy
• /
• 제39권2호
• /
• pp.89-99
• /
• 2009

Cricetinae 아과 Clethrionomys 아속에 속하는 한국산 대륙밭쥐(Clethrionomys rufocanus)의 정자의 형태적 특징을 알아보기 위하여 주사 및 투과형전자현미경으로 관찰하였다. C. rufocanus정자머리의 모양은 날카롭게 굽은 하나의 dorsal hook를 가지며, 전체적인 머리모양은 마치 도끼모양의 형태를 취하고 있었다. C. rufocanus정자의 전체길이는 95.8 ${\mu}m$이었으며, 정자머리의 길이는 7.8 ${\mu}m$, 꼬리는 88.0 ${\mu}m$이었다. 꼬리는 경부 (1.0 ${\mu}m$), 중편부(22.0 ${\mu}m$), 주편부와 미부 (65.0 ${\mu}m$)로 각각 구성되어져 있었다. 분절주 (segmented columns)는 약 10~12개의 마디로 이루어져 있었으며, 미토콘드리아의 수는 약 170~178개 정도이었다. 첨체 후 덮개는 핵의 1/2을 점유하고 있었으며, 적도절은 핵 표면의 첨체 후 덮개(post-nuclear cap)와 첨체덮개(acrosomal cap) 사이에 위치하고 있었다. 1, 5, 6번의 외측섬유들은 다른 것보다 더 크며, 섬유초 (fibrous sheath)와 종 지주(longitudinal column)은 주편부에서 관찰되어졌으며, 미부에서는 섬유초가 존재하지 않았다. 이상의 결과로 미루어 보아, 정자두부와 꼬리의 형태적인 구조는 정자의 진화 패턴과 종을 분류하는데 유용한 정보를 제공하리라 여겨진다.

• Fisheries and Aquatic Sciences
• /
• 제16권3호
• /
• pp.211-220
• /
• 2013

A shaking motion could be used to improve fish escapement from a cod-end net by creating a sieving effect over the swept volume or by disturbing the optomotor response of the fish. In this study, a perpendicular shaking motion was generated in a towed cod-end net by a circular canvas attached to the end of the codend, which formed a biased cap-like shape. This concept was tested by using a model in a flow tank and by towing a prototype cod-end during sea trials. For the model tests, the amplitude of the shaking motion was $0.6{\pm}0.1$ times the rear diameter of the cod-end, and the period of the shaking motion was $2.6{\pm}0.1$ s at a flow velocity of 0.6 or 0.8 m/s. In the sea trials, the amplitude was $0.5{\pm}0.2$ times the rear diameter of the cod-end, and the period of the shaking motion was $7{\pm}4$ s at towing speeds of 1.2 or 1.7 m/s. Thus, the shaking amplitude during the sea trials was equal to or less than that observed in the tank tests, and the shaking period was twice as long. The shaking motion described by the amplitude and period could be an effective means to stimulate fish escapement from cod-end during fishing operations considering the response of the fish.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.546.1-546
• /
• 2003

Laser doppler flowmeter (LDF) has been applied to the measurement of pulpal blood flow (PBF) in human teeth. As far as we searched, the detection area of the pulp in the blood flow measurement has not been clarified, yet. Therefore, the purpose of this study was to obtain information of the detection area in PBF measurement using LDF. The experiments were performed on the artificial blood circulation in extracted human upper central incisors. The apical portions of examined teeth (n=6) were severed and root canals were enlarged from the apical end to the 2mm incisal to the level of enamel-cement junction. An individual resin cap of each tooth was prepared and a hole was drilled 2mm incisal to enamel-cement junction of the labial side of the cap. The measurement probe of LDF (MBF3D, Moor Instrument, UK) was plugged into the hole of the cap. Heparinized human peripheral blood, which was in advance collected and diluted 3 times with physiological saline, was pumped through the apical foramen of the teeth via a silicone tube and a disposable needle (o.d. 0.7mm) and blood flow signals were monitored. The flux signal significantly increased with the enlargement of the root canal to incisal direction (p<0.01, Friedman analysis). The result indicates that the performance of LDF in PBF with human teeth is limited.

• Computers and Concrete
• /
• 제33권2호
• /
• pp.137-145
• /
• 2024

The technique of experimentally determining concrete's compressive strength for a given mix design is time-consuming and difficult. The goal of the current work is to propose a best working predictive model based on different machine learning algorithms such as Gradient Boosting Machine (GBM), Stacked Ensemble (SE), Distributed Random Forest (DRF), Extremely Randomized Trees (XRT), Generalized Linear Model (GLM), and Deep Learning (DL) that can forecast the compressive strength of ternary geopolymer concrete mix without carrying out any experimental procedure. A geopolymer mix uses supplementary cementitious materials obtained as industrial by-products instead of cement. The input variables used for assessing the best machine learning algorithm not only include individual ingredient quantities, but molarity of the alkali activator and age of testing as well. Myriad statistical parameters used to measure the effectiveness of the models in forecasting the compressive strength of ternary geopolymer concrete mix, it has been found that GBM performs better than all other algorithms. A sensitivity analysis carried out towards the end of the study suggests that GBM model predicts results close to the experimental conditions with an accuracy between 95.6 % to 98.2 % for testing and training datasets.

• 수산해양기술연구
• /
• 제50권3호
• /
• pp.342-350
• /
• 2014

An active stimulating device, such as a fluttering net or canvas attached to the end of a cod end generating a shaking motion, could help to encourage the escape of juvenile fish positioned passively near the net. Field fishing trials using a shrimp beam trawl were carried out to examine the effect on the reduction of juvenile fish or other discard catch by generating a shaking movement of the cod end using an unbiased cap-like round canvas. The mean period of the shaking motion with the round canvas was ~14 s, and the mean amplitude was 0.4 m as measured by peak event analysis and the global wavelet method. The bycatch of juvenile fish in 14 trials decreased by ~30% and by ~25% using a steady cod end for the total bycatch using a shaking cod end in the shrimp beam trawl, while the marketing catch was similar between steady and shaking cod ends. There was no difference in the body size of the shrimp or fish and species composition between the steady and shaking cod ends. Above results demonstrate a new method for bycatch reduction using an active stimulating device, although more detailed studies are needed.

• Steel and Composite Structures
• /
• 제44권3호
• /
• pp.339-351
• /
• 2022

A mortar-filled rectangular hollow structural section (RHS) can increase a structural section property as well as a compressive buckling capacity of a RHS member. In this study, the tensile performance of newly developed mortar-filled RHS members was experimentally evaluated with various connection details. The major test parameters were the type of end connections, the thickness of cap plates and shear plates, the use of stud bolts, and penetrating bars. The test results showed that the welded T-end connection experienced a brittle weld fracture at the welded connection, whereas the tensile performance of the T-end connection was improved by additional stud bolts inserted into the mortar within the RHS tube. For the end connection using shear plates and penetrating stud bolts, ductile behavior of the RHS tube was achieved after yielding. The penetrating bars increased load carrying capacity of the RHS. Based on the analysis of the load transfer mechanism, the current design code and test results were compared to evaluate the tensile capacity of the RHS tube according to the connection details. Design considerations for the connections of the mortar-filled RHS tubes were also recommended.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.6-7
• /
• 2021

Although the development of free-form architectural technology continues, it consumes a lot of money and time due to the one-time formwork and the difficulty of maintaining quality due to manual work. To this end, in this study, a shape connection technique was proposed and verified to improve the limitations of implementing the curved surface of the existing lower multi-point press. In order to improve the accuracy of the shape, a curved surface was implemented using a silicon cap and a silicon plate. As a result of the error analysis of the shape, a small value of less than 3 mm was found. This study can implement more accurate curved surfaces than conventional technologies and produce high-quality free-form panels.