• Title/Summary/Keyword: Enclosure

Search Result 644, Processing Time 0.02 seconds

Control Effect of Temperature and Humidity by Ventilation Fan Operation Methods in Wintering Honey Bee House (월동용 양봉사의 환기팬 작동방식에 따른 온 ${\cdot}$ 습도 조절효과)

  • Lee, Jong-Won;Lee, Hyun-Woo;Lee, Suk-Gun;Jin, Ran-Shu;Choi, Kwang-Soo
    • Journal of Bio-Environment Control
    • /
    • v.12 no.3
    • /
    • pp.127-131
    • /
    • 2003
  • This study was conducted to establish the ventilation fan operation schedule to be able to provide satisfactory environment for colonies in thc wintering honey bee house. The simulation and practical measuring test were conducted to verify the applicability of an existing simulation program to thc calculation of inside thermal environment condition of the house, and the environment control performance was compared between the two types of fan operation schedule to find the proper schedule. It was concluded that the program could be used to design thc materials of the enclosure and the fan operation schedule and decide the number of accommodation hives. Inside temperature of bee house controlled by the fan operation schedule B was lower than the schedule A under the similar high outside temperature condition. In the presence of the high outside temperature condition, inside air temperature of bee house could be decreased by changing fan operation schedule A to schedule B. The humidity variation in bee house controlled by the tan operation of schedule B was smaller than that by schedule A. These results indicated that the schedule B was superior in the aspect of the environment control performance.

Analysis on PD Pulse Distribution by Defects Depending on SF6 Pressure (SF6 압력에 따른 결함별 부분 방전 펄스의 분포 분석)

  • Kim, Sun-Jae;Jo, Hyang-Eun;Jeong, Gi-Woo;Kil, Gyung-Suk;Kim, Sung-Wook
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.28 no.1
    • /
    • pp.40-45
    • /
    • 2015
  • Electrode systems: a protrusion on conductor (POC), a protrusion on enclosure (POE), a crack in epoxy plate and a free particle (FP) were fabricated to simulate insulation defects in a gas insulated switchgear (GIS). $SF_6$ gas was filled in the electrode systems by 3 bar and/or 5 bar, respectively. Partial discharge (PD) pulses were detected through a $50{\Omega}$ non-inductive resistor. A calibration test was carried out according to IEC 60270, and the sensitivity was 0.25 pC/mV. PD pulses were distributed in the phase of $50^{\circ}{\sim}135^{\circ}$ and over 95% of them existed in the phase of $55^{\circ}{\sim}120^{\circ}$ for the POC. PD pulses were distributed in the phase of $230^{\circ}{\sim}310^{\circ}$ and over 90% of them existed in phase of $220^{\circ}{\sim}300^{\circ}$ for the POE. PD pulses occurred in the phase of $40^{\circ}{\sim}60^{\circ}$ and $220^{\circ}{\sim}300^{\circ}$ for the crack, and pulse counts were 25% higher in negative polarity than in positive polarity. PD pulses were distributed in every phase unlike to other three electrode systems and the peak magnitude was measured at $118^{\circ}$ and $260^{\circ}$ for the FP. As described above, PD pulses were observed in positive polarity for the POC, in negative one for the POE, in both one for the crack and the FP. In conclusion, it is expected that the identification rate of defect type can be improved by considering the polarity ratio of PD pulses on the PRPDA method.

Volcanic Processes of Dangsanbong Volcano, Cheju Island (제주도 당산봉 화산의 화산과정)

  • 황상구
    • The Journal of the Petrological Society of Korea
    • /
    • v.7 no.1
    • /
    • pp.1-14
    • /
    • 1998
  • Dangsanbong volcano, which is located on the coast of the western promontory of Cheju Island, occurs in such a regular pattern on the sequences which represent an excellent example of an eruptive cycle. The volcano comprises a horseshoe-shaped tuff cone and a younger nested cinder cone on the crater floor, which are overlain by a lava cap at the top of the cinder cone, and wide lava plateau in the moat between two cones and in the northern part. The volcanic sequences suggest volcanic processes that start with Surtseyan eruption, progress through Strombolian eruption and end with Hawaiian eruption, and then are followed by rock fall from sea cliff of the tuff cone and by air fall from another crater. It is thought that the eruptive environments of the tuff cone could be mainly emergent because the present cone is located on the coast, and standing body of sea water could play a great role. It is thought that the now emergent part of the tuff cone was costructed subaerially because there is no evidence of marine reworking. The emergent tuff cone is characterized by distinctive steam-explosivity that results primarily from a bulk interaction between rapidly ascending magma and external water. The sea water gets into the vent by flooding accross or through the top or breach of northern tephra cone. Dangsanbong tuff cone was constructed from Surtseyan eruption which went into with tephra finger jetting explosion in the early stage, late interspersed with continuous upruch activities, and from ultra-Surtseyan jetting explosions producting base surges in the last. When the enclosure of the vent by a long-lived tephra barrier would prevent the flooding and thus allow the vent to dry out, the phreatomagmatic activities ceased to transmit into magmatic activity of Strombolian eruption, which constructed a cinder cone on the crater floor of the tuff cone Strombolian eruption ceased when magma in the conduit gradually became depleted in gas. In the Dangsanbong volcano, the last magmatic activity was Hawaiian eruption which went into with foundation and effusion of basalt lava.

  • PDF

Carbonization Patten and Operation Characteristics of a 1Φ 2 W MCCB Damaged by PCITS (PCITS에 의해 소손된 1Φ 2 W MCCB의 탄화 패턴 및 작동 특성)

  • Lee, Jae-Hyuk;Choi, Chung-Seog
    • Fire Science and Engineering
    • /
    • v.28 no.5
    • /
    • pp.8-13
    • /
    • 2014
  • The purpose of this study is to analyze the damage pattern when overcurrent is applied to a thermal magnetic type molded case circuit breaker (MCCB) using a Primary Current Injection Test System (PCITS). When an overcurrent of 150 A was applied to the PCITS for 5 seconds with the trip bar of an MCCB being damaged, it was found that the surface of the temperature control device (bimetallic strip) positioned at the right was significantly carbonized. When an overcurrent of 300 A was applied to the PCITS for 5 s under the same conditions, the entire temperature control device was deteriorated, becoming flattened and in close contact with the MCCB. When an overcurrent of 450 A was applied to the PCITS for 5 s, the coil of the temperature control device was melted and disconnected. In addition, it was observed that the contacts, the enclosure and upper cover were deformed and there was a trace of carbonization on them. When approximately 3 s had elapsed after an overcurrent of 600 A was applied, white smoke occurred inside the MCCB and a flame was radiated out, after which the overcurrent supply stopped with "phutt" (whomp) sound. It was observed that when the same type of MCCB is damaged by a general flame, the surfaces of its handle, terminal, arc divider (extinguisher) and temperature control device were carbonized uniformly. In addition, it was found that the trip bar of the operating mechanism was melted down and the metal operation pin was moved while being tripped.

Disturbance in seedling development of Korean fir (Abies koreana Wilson) tree species on higher altitude forests of Mt. Hallasan National Park, the central part of Jeju Island, Korea

  • Kim, Eun-Shik;Lee, Jong-Won;Choi, Im-Joon;Lim, Wontaek;Choi, Junghwan;Oh, Choong Hyeon;Lee, Sung-Hoon;Kim, Young-Sun
    • Journal of Ecology and Environment
    • /
    • v.41 no.6
    • /
    • pp.152-164
    • /
    • 2017
  • Background: Natural regeneration of seedlings as well as saplings of Korean fir has been significantly impacted by the browsing from the early stages of their development, potentially, by roe deer for the last two to three decades at the study site since late 1980s. This study was carried out to investigate current status of the disturbance in the seedling development of Korean fir (Abies koreana) on Mt. Hallasan, Jeju Island, Korea. Methods: Field survey was carried out during June and August in 2016 to measure the characteristics of study site and understory vegetation by applying systematic sampling to 125 plots of $5m{\times}5m$ quadrat located on eastern slope of the mountain. Correlation and regression analyses were applied to the variables quantified from the data sets using the SAS software. Results: No saplings with their diameters at breast heights smaller than 5.0 cm were found at the study site indicating the serious disturbance in the natural regeneration of Korean fir at the study site. No seedlings with their heights taller than 36.0 cm were found at the study site indicating even more serious disturbance during earlier stage of the natural regeneration of Korean fir at the study site. A total of 616 individuals of the seedlings of Korean fir were found at 54 out of 125 sampling plots. One hundred thirty-eight seedlings (22.4%) out of 616 individual seedlings have the vestiges for being grazed, potentially, by roe deer. Conclusions: Due considerations should be given to the effects of browsing of the seedlings by roe deer to promote the natural regeneration of Korean fir, ultimately to restore Korean fir. It is needed for the managers of the forest to install fences around the forest area. Exclosure experiments as well as enclosure experiments of different densities of browsing should be carried out. In addition, treatment with different densities of Jeju dwarf bamboo should also be included in the experiment on Mt. Hallasan National Park, Jeju Island, Korea.

The Influence of Details on the Sense of Place in Islamic Gardens - Focusing on 'the Courtyard of the Lions' - (이슬람정원에서 디테일이 장소성에 미친 영향 -'사자의 중정'을 대상으로 -)

  • Yoon, Mi-Bang;Kim, Han-Bai
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.38 no.5
    • /
    • pp.122-133
    • /
    • 2010
  • Humans desire the achievement a of sense of unity between themselves and place to create an identity of place as a realization of his or her sense of belonging. Humans develop ideas from their culture and environment to be expressed physically within the landscape through symbols. Symbols are formed within a place through the structure of the space and, more visually, through the details. The purpose of this paper is to examine the structure of space and the details of 'the Courtyard of the lions' in the Alhambra and to study how the details influence the formation of the identity of place. This paper also compares the structure and details in terms of the meaning of symbols, design languages, cultural, social and historical background and the experience of the place. The structure of the space in 'the Courtyard of the Lions' represents Paradise in the Islamic religion a common theme in the composition of traditional Islamic gardens. The design languages expressed within the structure are order, balance, accent and enclosure; the inherit meanings of the structure are religion, the natural environment and way of life. The details tell of the ideology of Paradise, royalty, nature, and praise of God, while their design languages include physical and visual continuity, accent, variation, the feeling of movement, rhythm, and depth perception. The details also express the historical background of the Dynasty of Nasrid and the style of Mudejar. The name 'the Courtyard of the Lions' was taken from the detail of the lim figures, details within the landscape which are important in building an identity of place. This study demonstrates that the details at 'the Courtyard of the lions' achieved a sense of unity between man and place. In conclusion, details have immense influence in building of the identity of place.

Prevention of Early Frost Damage of the Concrete under Severely Low Temperature according to Heat Curingmethods (극저온 조건에서 보온양생 방법 변화에 따른 콘크리트의 초기동해 방지)

  • Han, min-Cheol
    • Journal of the Korea Institute of Building Construction
    • /
    • v.16 no.1
    • /
    • pp.67-76
    • /
    • 2016
  • Concrete exposed to severely low temperature below $-20^{\circ}C$ should be provided with proper heat supplying curing to protect the concrete from early frost damage at the time of pouring.meanwhile, so far, effective heat curingmethods of the concrete under severely low temperature are not well established in Korea. For this reason, the objective of this paper is to provide effective heat curingmethod of concrete exposed to severely low temperature to protect early frost damage by varying the combination of heat curingmaterial combinations. Temperature history,maturity development and core strength results are investigated. Fourmock-up specimens simulating slab, wall and column were prepared and heat insulation, heat supplying and both were applied. Test results indicate that the combination of quadruple layer bubble sheet(4BS) and embedding of heating cable has desirable performance for a slab, and heat supplying curing inside heat enclosure and heat generationmat also shows desirable performance for a wall, and for a column, use of EPS heat insulation has proper performance against early frost damage, which reaches $45^{\circ}D{\cdot}D$ and helps the concretemaintain above $0^{\circ}C$ within 3 days. Themethodsmentioned above are believed to be optimum protection from early frost damage of the concrete under $-20^{\circ}C$.

Growth Inhibition of Toxic Cyanobacterium Microcystis aeruginosa by Various SNPs (Silver Nanoparticles) (여러 가지 은나노 물질의 유해 남조 Microcystis aeruginosa 생장억제)

  • Park, Myung-Hwan;Kim, Keun-Hee;Lee, Huk-Hee;Kim, Jin-Seog;Hwang, Soon-Jin
    • Korean Journal of Ecology and Environment
    • /
    • v.42 no.1
    • /
    • pp.75-84
    • /
    • 2009
  • The effect of various SNPs (silver nanoparticles) on the growth of Microcystis aeruginosa was investigated in laboratory and field experiment. Four SNPs, namely JS47N, JS47N-K2, JS47N/3-1 and JS47N/3-2 were used to this study. The Ag size, concentration and color of these solutions were about $20{\sim}40nm$, $200mg\;L^-1$ and brown, respectively. At 0.01 and $0.1mg\;L^-1$, SNPs inhibited the growth of unicellular M. aeruginosa by 99.4% and 99.9%, respectively. However, SNPs of $1mg\;L^-1$ inhibited the growth of colonial M. aeruginosa by 98.5%, whereas the other three concentrations (0.001, 0.01 and $0.1mg\;L^-1$) had little inhibitory effect. In experimental enclosures from eutrophic lake, cyanobacteria including M. aeruginosa were found to be more sensitive to the SNPs than green algae and diatoms. In conclusion, our study indicates that SNPs has a selective cyanocidal potential when used to M. aeruginosa. We believe that future studies need to test on various other organisms, and determine minimum concentration for field application.

Linewidth Reduction of a Yellow Laser by a Super-cavity and the Measurement of the Cavity Finesse (초공진기를 이용한 노란색 레이저의 선폭 축소 및 초공진기의 예리도 측정)

  • Lee, Won-Kyu;Park, Chang-Yong;Park, Sang-Eon;Ryu, Han-Young;Yu, Dai-Hyuk;Mun, Jong-Chul;Suh, Ho-Suhng
    • Korean Journal of Optics and Photonics
    • /
    • v.21 no.3
    • /
    • pp.123-128
    • /
    • 2010
  • Sum frequency generation was utilized to obtain a yellow laser with the wavelength of 578.4 nm for a probe laser of an Yb lattice clock. The output of an Nd:YAG laser with wavelength of 1319 nm and that of an Yb-fiber laser with wavelength of 1030 nm were passed through a waveguided periodically-poled lithium niobate (WG-PPLN) for sum frequency generation. It is required that the probe laser has a linewidth of the order of 1 Hz to fully resolve the Yb lattice clock transition. Thus, the linewidth of the probe laser was reduced by stabilizing the frequency to a super-cavity. This was made of ULE with a low thermal expansion coefficient, and was mounted on an active vibration-isolation table at the optimal point for the reduced sensitivity to vibration. Also, this was installed in a vacuum chamber, and the temperature was stabilized to 1 mK level. This system was installed in an acoustic enclosure to block acoustic noise. The finesse of the super-cavity was measured to be 380 000 from the photon life time of the cavity.

Emission Rates of Biogenic Volatile Organic Compounds (BVOCs) from Various Tree Species in Korea (I) (국내 수종별 BVOCs 방출량 (1))

  • Chang, Hanna;Son, Jounga;Je, Sun Mi;Oh, Chang-Young;Cho, Minseok;Kim, Juwan;Kim, Jaehyeon;Choi, Won-Sil;Lee, Young-Kyu
    • Journal of Korean Society of Forest Science
    • /
    • v.110 no.4
    • /
    • pp.543-553
    • /
    • 2021
  • This research focused on the investigation of isoprene and terpene emissions from 30 major urban tree species. We conducted sampling using a specific dynamic enclosure system between August and September 2020. Seedlings less than three years old were enclosed in a chamber consisting of a 400 L transparent Tedlar bag. The air-flows from the chamber's outlet were sampled using Tenax-filled sorbent tubes in the presence of standard conditions (temperature: 30℃, PAR: 1,000 μmol/m2/sec). A thermal desorption GC/MS system was used to analyze 38 BVOC compounds (isoprene, monoterpene, sesquiterpene, oxygenated monoterpene, and sesquiterpene). Isoprene emitters included Phyllostachys bambusoides, Quercus serrata, Daphniphyllum macropodum, and Buxus Koreana. Monoterpene emitters included Pinus rigida, Acer pictum subsp. mono, Larix kaempfer, Magnolia denudata, Metasequoia glyptostroboides, Pinus koraiensis, Pinus densiflora, and Abies holophylla. The monoterpene emission profiles were dominated by α-pinene, myrcene, limonene, β-pinen, and sabinene, while caryophyllene and farnesene were the prominent sesquiterpenes. Predominant oxygenated monoterpene compounds were also discovered as pulegone, borneol, menthol, eucalyptol, and nerol, while caryophyllene oxide were the prominent oxygenated sesquiterpenes. Sesquiterpenes and oxygenated sesquiterpenes had relatively lower contributions for all species.