• Journal of Pharmaceutical Investigation
• /
• v.32 no.1
• /
• pp.41-45
• /
• 2002

The purpose of this study is to microencapsulate a highly hygroscopic drug, pyridostigmine bromide (PB), with a waterproof wall material, in order to increase the flowability of the drug particles. Polyvinylacetaldiethylaminoacetate (AEA), Eugragit E and Eugragit RS were examined as the wall materials. Microcapsules containing PB were prepared by the evaporation technique in an acetone/liquid paraffin system using aluminum tristearate as a core material, and evaluated for drug encapsulation efficiency, surface morphology, particle size and drug dissolution. The encapsulation of PB in the wall material was almost complete. Among the wall materials examined, AEA exhibited the most excellency in shape, surface texture, flowability, size distribution of microcapsules. Above results suggest that AEA would be a potential wall material for microcapsulation of highly hygroscopic drugs, such as PB. Through microencapsulation with AEA, inconvenience of handling of PB powders encountered in the process of weighing and packing the powders to tableting die or capsule body could be greatly improved.

• Korean Journal of Materials Research
• /
• v.31 no.1
• /
• pp.54-59
• /
• 2021

In this work, narrow-band green-emitting CsPbBr3 particles are embedded in commercialized glass composites by a facile dry process. By optimizing the method through sintering in glass frit (GF) composites including CsBr and PbBr2, used as precursors, the encapsulation of CsPbBr3 particles made them waterproof with green fluorescence. To improve the fluorescent properties by reducing aggregation of CsPbBr3, fumed silica (FS) is additionally used to help particles avoid bulking up in the glass matrix. The CsPbBr3 perovskite/glass composites are characterized using scanning electron microscopy (SEM) images and energy-dispersive X-ray spectroscopy (EDS) maps, which support the existence of CsPbBr3 particles in the glass matrix. The photoluminescence (PL) properties demonstrate that the emission spectrum peak, full width at half maximum (FWHM), and photoluminescence quantum yield (PLQY) values are 519 nm, 17 nm, and 17.7 %. We also confirm the water-resistant properties. To enhance water/moisture stability, the composite sample is put directly into water, with its PLQY monitored periodically under UV light.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.334-334
• /
• 2005

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.193-193
• /
• 2006

Fluorescent dyes were encapsulated in the nanometer-sized diblock copolymer micelles to control the fluorescence resonance energy transfer. Since acceptor molecules and donor molecules were effectively isolated in the independent micelles, the energy transfer between donors and acceptors was suppressed by the site isolation, leading to the simultaneous emission from both donor and acceptor molecules.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1995.11a
• /
• pp.3-3
• /
• 1995

Plastic IC encapsulation utilizing lead on chip(LOC) die attach technique allows higher device density per unit package area, and faster current speed and easter leadframe design. Nevertheless, since the top surface of the chip is directly attached to the area of the leadframe with a double-sided adhesive tape in the LOC package, it tends to be easily damaged by the leadframe, leading to limitation in its utilization. In this work, it is detailed how the damage of the chip surface occurs, and it is influenced and improved by the LOC construct.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.8
• /
• pp.885-892
• /
• 1999

This communication describes the synthesis of : (i) non-toxic and low cost nanocrystalline electrode materials, which can be prepared advantageously at low temperature ; (ii) highly conductive electrolyte membranes formed by the nano-encapsulation within a poly(acrylonitrile)-based polymer matrix of a solution of LiPF6 in organic solvants. The performances of rechargeable PLR (Plastic Lithium Rechargeable) batteries using the above mentioned components are presented.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3368-3372
• /
• 2012

The $Bi_2O_3$ nanowires are highly sensitive to low concentrations of $NO_2$ in ambient air and are almost insensitive to most other common gases. However, it still remains a challenge to enhance their sensing performance and detection limit. This study examined the influence of the encapsulation of ${\beta}-Bi_2O_3$ nanorods with $In_2O_3$ on the $NO_2$ gas sensing properties. ${\beta}-Bi_2O_3-core/In_2O_3-shell$ nanorods were fabricated by a two-step process comprising the thermal evaporation of $Bi_2O_3$ powders and sputter-deposition of $In_2O_3$. Multiple networked ${\beta}-Bi_2O_3-core/In_2O_3-shell$ nanorod sensors showed the responses of 12-156% at 1-5 ppm $NO_2$ at $300^{\circ}C$. These response values were 1.3-2.7 times larger than those of bare ${\beta}-Bi_2O_3$ nanorod sensors at 1-5 ppm $NO_2$. The enhancement in the response of ${\beta}-Bi_2O_3$ nanorods to $NO_2$ gas by the encapsulation by $In_2O_3$ can be accounted for based on the space-charge model.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.866-871
• /
• 1997

The com starch was treated with propylene oxide, 1,2-epoxybutane, glycidyl methacrylate, maleic anhydride, caprolactone, respectively, in order to alter the hydrophilicity and the reactivity of starch. When the starch was not dried, poor reaction was observed except the reaction with propylene oxide or maleic anhydride. The treated starches were grafted with styrene by several different polymerization methods. Solution polymerization and redox polymerization using cerium(IV) ion show poor grafting efficiency and poor yield. Encapsulation of starch with polystyrene by suspension polymerization was difficult due to the hydrophilicity of the starch. Among the examined methods, emulsion polymerization was found to be the suitable way to graft styrene onto starch.

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.215-220
• /
• 2007

The control of the surface energy by electrohydrodynamic force provides electrospraying with various potential advantages such as simple particle size control, mono-dispersity, high recovery, and mild processing conditions. The advantages are quite helpful to improve the stability of protein drug and control its release. Herein, the nano-encapsulation of protein drugs using electrospraying was investigated. Albumin as a model protein was processed using uniaxial and co-axial electrospraying, and chitosan, polycaporlactone (PCL), and poly (ethylene glycol) (PEG) were used as encapsulation materials. The major processing parameters such as the conductivity of spraying liquids, flow rate, the distance of electrical potential gradient, etc were measured to obtain the maximum efficiency. In the chitosan systems, mean particles size decreases as flow rate and the distance between nozzle and the collecting part decreases. In the uniaxial technique of the PCL systems, mean particles size decreases as flow rate decreases. In the coaxial technique of the PCL systems, it was found that the particles size gets larger under the application of the higher ratio of inner-to-outer liquid flow rates. The primary particles formed out of an electrospraying nozzle showed narrow particle size distribution, but once they arrived to the collecting part, aggregation behavior was observed obviously. Efficient nano-encapsulation of albumin with PCL, PEG, and chitosan was conveniently achieved using electrospraying at above 12 kV.

• Journal of Applied Biological Chemistry
• /
• v.49 no.2
• /
• pp.39-47
• /
• 2006

Incorporation of bioactive compounds such as vitamins, probiotics, bioactive peptides, and antioxidants into Nutrient Delivery System (NDS) for 'nanofood' provides simple way to develop novel functional foods that may have physiological benefits or reduce risks of diseases. As vital nutrient in nanofood, proteins possess unique functional properties including ability to form gels and emulsions, which allow them to be ideal nanofood materials for encapsulation of bioactive compounds. Based on protein physico-chemical properties, this review describes potential role of nanofood materials for development of NDS in hydrogel form, micro-or nano-particles. Applications of these nanofood materials to protect delivery-sensitive nutraceutical compounds are illustrated, and impacts of particle size on release properties are emphasized.