• 대한소아치과학회지
• /
• 제48권3호
• /
• pp.280-290
• /
• 2021

치수복조제는 치관부에 위치하기 때문에 색 안정성이 최종적인 심미성에 영향을 미치는 중요한 요소로 간주된다. 이 연구는 시간에 따른 치관의 색조 변화를 분석하여 치수복조제의 색조 안정성을 비교해보고자 하였다. 발거된 소구치의 치관에 와동을 형성하고 4가지 종류의 치수복조제를 충전하였다. 색상 변화는 분광광도계를 사용하여 재료를 넣기 전, 재료를 넣은 즉시, 재료를 넣고 1일 후, 1주 후, 2주 후, 4주 후, 8주 후, 12주 후, 16주 후에 측정을 시행하였다. Proroot white MTA^®와 TheraCal LC^®는 시간이 지남에 따라 지속적인 L^* 값의 감소와 ∆E^* 값의 증가를 보였다. 반면 Biodentine^®과 Well-root^TM PT는 유의한 L^* 값의 변화가 없었고 일정한 ∆E^* 값을 유지하였다. 방사선 불투과성 물질로 산화 비스무트가 포함된 치수복조제의 적용 시 치아의 색조 변화가 나타날 수 있으며, 법랑질의 두께가 얇은 유치의 수복이나 전치부의 심미 수복 시 치수복조제의 장기적인 색 안정성을 고려해야 한다.

• 한국치위생학회지
• /
• 제13권5호
• /
• pp.901-908
• /
• 2013

Objectives : The purpose of this study was to evaluate the bleaching effect of 3% hydrogen peroxide containing strip with primer in vivo. Methods : 22 female subjects aged from 20 to 39 years old were recruited after informed consent. They were divided into two groups with control and experimental group. Experimental group was bleached with 3% HP strip with primer, and control group received placebo for 14 days. Color changes were measured with Shade Eye-NCC (Shade Eye-NCC, SHOFU Co., Japan), Shade guide (VITA classical shade guide, $VIDENT^{TM}$, CA, USA) and digital camera image. All collected data were analyzed using SPSS 18.0. Results : At baseline, $L^*$ was $71.75{\pm}3.2$ and $b^*$ was $14.90{\pm}3.6$ in control, and $L^*$ was $71.3{\pm}3.4$ and $b^*$ was $15.61{\pm}3.7$ in experimental group. At day 14, $L^*$ was $71.35{\pm}3.2$ and $b^*$ was $13.97{\pm}4.3$ in control, and $L^*$ was $73.51{\pm}2.0$, $b^*$ was $9.10{\pm}3.0$ in experimental group. ${\Delta}E^*$ of all teeth were statistically significant between the two groups. Final ${\Delta}E^*$ was $7.15{\pm}2.09$ at experimental group and $2.78{\pm}2.93$ at control group, and the difference was significant (p<0.005). Color changes using shade guide also significantly decreased at 14th day compared with baseline at experimental group (p<0.005). Conclusions : 3% hydrogen peroxide strip with primer revealed effective enough to bleaching the human enamel during 14 days without any soft and hard tissue irritations.

• 치위생과학회지
• /
• 제13권2호
• /
• pp.203-212
• /
• 2013

한국 땃쥐속 우수리땃쥐 Crocidura lasiura와 작은땃쥐 C. suaveolens, 뒤쥐속 뒤쥐 Sorex caecutiens의 치아형태와 법랑질 표면의 함유물을 EDX를 이용하여 정성 분석하였다. 우수리땃쥐와 작은땃쥐의 경우, 치식은 I3/1 C1/1 P1/1 M3/3=28이었고, 상악 제1대구치와 제2대구치는 5개의 교두들로 만들어진 균형이 맞지 않는 W형을 가지고 있었고, 상악 제3 대구치는 상악 제1대구치와 제2대구치의 3/1크기였으며, 상악 제1절치는 2개의 다른 크기의 갈고리 모양이었으며, 하악 제1 절치는 매끈하였다. 뒤쥐의 경우, 치식은 I3/1 C1/1 P3/1 M3/3=32이었고, 상악 제1대구치와 제2대 구치는 균형이 맞는 W형을 가졌고 상악 제3대구치는 다른 대구치의 약 절반 크기였으며, 상악 제1절치는 2개의 비슷한 크기의 갈고리 모양이었으며 하악 제1절치는 매끈하지않은 톱니모양이었다. 치아와 두개골 측정치 비교에서 우수리땃쥐가 3종 중 가장 컸으나(p<0.001), 작은땃쥐와 뒤쥐는 크기에서 차이가 없었다(p>0.05). EDX를 이용한 하악 제1절치와 하악 제1대구치의 법랑질 표본의 정성적 분석으로부터, C, O, P, Ca, Cu가 모든 표본에서 검출되었고 Pb는 몇몇 표본에서만 검출되었다. 3종들에서 이들의 함유량은 통계적 차이를 보이지 않았다(p>0.05). Fe는 붉게 착색된 치아를 가지는 뒤쥐의 법랑질 표면에서만 검출되었다. 따라 서 Fe가 치아의 붉은 착색의 원인이다. 이상의 결과들은 치아 끝의 색을 포함한 치아 형태학적 특징들이 땃쥐속과 뒤쥐속의 분류키가 될 수 있음을 시사하고 있다.

• 대한치과보철학회지
• /
• 제43권5호
• /
• pp.587-598
• /
• 2005

Statement of problem: Ceramic restorations should be made of porcelain layers of different opacity, shade, and thickness in order to provide a natural appearance. Lithium disilicate glass-ceramic system has superior color reproducibility, because it uses the ceramic ingot which is similar to teeth shade and uses the staining technique and layering technique. However, staining technique has a fault of discoloration. Also, porcelain is divided core and dentin layer, it is not enough to study about the influence of porcelain layer thickness and shade on the shade of ceramic restorations. Purpose: The purpose of this study was to evaluate the influence of porcelain layer thickness and color on the final shade of ceramic restorations. Materials and method: The CIE $L^*a^*b^*$(CIELAB) values of 72 assembled specimens, each consisting of 3 discs (enamel porcelain 0.2 mm/dentin porcelain -1.2, 0.9, 0.7, 0.5 or 0.3 mm/ceramic core -0.3, 0.5, 0.7, 0.9 or 1.2 mm, diameter is 1.0 mm) were evaluated with a spectrophotometer (Model Chromaview 300, Spectron Tech Co, Korea) for the shade A1, A2, A3 and A4. Distilled water (refractive index: 1.7) was used to attain optical contact between the layers. White, white gray, and white brown backgrounds were used to assess the influence of the background on the final shade. And the mean color difference value$({\Delta}E)$ was calculated. Results and conclusion: The results obtained from this study were as follows. 1. There was a significant correlation between the thickness ratio of the ceramic core/dentin porcelain system and $L^*,\;a^*\;and\;b^*$ values when the total thickness of specimen combination was smaller than 1.4 mm(P<0.05). 2. The specimen which the ceramic core thickness was more than 0.7 mm had the best masking effect against background colors. 3. The mean color difference value$({\Delta}E)$ is smaller than 2 $({\Delta}E<2)$ when the ceramic core thickness was larger than 0.7 mm and the total thickness of specimen was more than 1.4 mm.

• Restorative Dentistry and Endodontics
• /
• 제48권2호
• /
• pp.13.1-13.11
• /
• 2023

Objectives: Natural extracts have been investigated as a biomimetic strategy to mechanically strengthen the collagen network and control the biodegradation of extracellular matrix. This study evaluated the effect of epigallocatechin-3-gallate (EGCG) on abfraction lesions prior to the composite resin. Materials and Methods: The sample consisted of 30 patients (aged between 28 and 60 years) with abfraction lesions located in 2 homologous premolars. The teeth were randomly assigned according to dentin treatment: 0.02% EGCG solution or distilled water (control). After enamel acid etching, the solutions were applied immediately for 1 minute. The teeth were restored with Universal Adhesive (3M) and Filtek Z350 XT (3M). Analyzes were done by 2 independent examiners using modified USPHS (retention, secondary caries, marginal adaptation, and postoperative sensitivity) and photographic (color, marginal pigmentation, and anatomical form) criteria at baseline (7 days) and final (18 months). The data analysis used Friedman and Wilcoxon signed-rank tests (α = 0.05). Results: At baseline, all restorations were evaluated as alpha for all criteria. After 18 months, restorations were evaluated as alpha for secondary caries, color, and marginal pigmentation. There was significant difference between baseline and 18 months (p = 0.009) for marginal adaptation and postoperative sensitivity (p = 0.029), but no significant difference were verified between treatments (p = 0.433). The EGCG group had a restoration retention rate of 93.3%, while the control group had 96.7%. Conclusions: The application of EGCG solution on abfraction lesions did not significantly influence the survival of the restorations based on clinical and photographic criteria.

• Restorative Dentistry and Endodontics
• /
• 제48권4호
• /
• pp.33.1-33.12
• /
• 2023

Objectives: This study aimed to evaluate the bleaching efficacy and hydrogen peroxide permeability in the pulp chamber by the at-home bleaching gel in protocols applied on different dental surfaces. Materials and Methods: Forty premolars were randomly into 4 groups: control group no bleaching, only application on the buccal surface (OB), only application on the lingual surface (OL) and application in buccal and lingual surfaces, simultaneously (BL). At-home bleaching gel (White Class 7.5%) was used for the procedure. The bleaching efficacy was evaluated with a digital spectrophotometer (color change in CIELAB [ΔE_ab] and CIEDE 2000 [ΔE₀₀] systems and Whitening Index for Dentistry [ΔWI_D]). The hydrogen peroxide permeability in the pulp chamber (㎍/mL) was assessed using UV-Vis spectrophotometry and data were analyzed for a 1-way analysis of variance and Tukey's test (α = 0.05). Results: All groups submitted to bleaching procedure showed bleaching efficacy when measured with ΔE_ab and ΔE₀₀ (p > 0.05). Therefore, when analyzed by ΔWI_D, a higher bleaching efficacy were observed for the application on the groups OB and BL (p = 0.00003). Similar hydrogen peroxide permeability was found in the pulp chambers of the teeth undergoing different protocols (p > 0.05). Conclusions: The application of bleaching gel exclusively on the OB is sufficient to achieve bleaching efficacy, when compared to BL. Although the OL protocol demonstrated lower bleaching efficacy based on the ΔWI_D values, it may still be of interest and relevant in certain clinical scenarios based on individual needs, requiring clinical trials to better understand its specificities.

• 대한치과보철학회지
• /
• 제37권4호
• /
• pp.416-424
• /
• 1999

Simulation of naturally appearing enamel in fixed prosthodontics could be achieved with all ceramics. The purpose of this study was to investigate the stain resistance of 4 different all ceramics materials (In-ceram, IPS Empress, Celay, Vintage). Forty specimens were prepared using manifacture's instruction and the samples were divided into two groups. The specimens for one group were glazing and those for other group were ground to remove the glazing layer. All specimens were immersed in methylene-blue for 24hours. The color values for each specimen was measured with colorimeter (Mode Tc-6Fx, Tokyo Denshoku Co.) prior to and after immersion in methylene-blue. The following conclusions were drawn from this study. 1 The stain resistance of glazing ceramics was higher than that of unglazing ceramics. 2. The changes of ${\Delta}E^*$\;and\;L^*$ values were revealed in Vintage and unglazing Celay. 3. The changes of $a^*$ values were revealed in unglazing vintage, Celay, In-ceram. 4. The changes of $b^*$ value were revealed in Vintage, IPS Empress and unglazing Celay.

• 한국산학기술학회논문지
• /
• 제19권8호
• /
• pp.176-182
• /
• 2018

심미 치과보철물의 가장 중요한 요인 중의 하나는 치아의 색상이다. 지르코니아는 디자인, 밀링, 착색, 건조, 소결과정을 거치는데, 이때의 지르코니아 착색제의 건조 정도가 색조에 어떠한 영향을 미치는지 알아보고자 한다. 실험을 위해 캐드캠을 이용하여 지르코니아 블록별(L block(LAZOR), Z block(Zircos-E block posterior), A block(AlphaZ))로 각 15개씩 총 45개의 원형 시편을 제작하였다. 그다음 지르코니아 시편을 화학적 착색제를 이용하여 미건조(0sec), 중간건조(10sec), 완전건조(10min)의 온도유지시간(Temperature dwelling time)을 부여하여 오븐에서 건조한 후 제조회사 지시대로 지르코니아 시편을 소결하였다. 분광광도계를 이용하여 색조를 측정하였다. 치과용 지르코니아 시편의 건조유지시간에 따라 색조의 변화를 비교 분석하기 위해 One-way ANOVA를 시행하고, 사후검정으로 Tukey test를 실시하였다. 지르코니아 $L^*$값은 L, A 시편과 $a^*$값은 A 시편, $b^*$값은 Z 시편의 건조 정도에 따라 통계적으로 차이가 없으나 (p>0.05), $L^*$값은 Z 시편과 $a^*$값은 L, Z 시편, $b^*$값은 L, A 시편이 건조 정도에 따라 통계적으로 차이가 있었다(p<0.05). 결론적으로 착색제의 건조유지시간이 길수록 지르코니아 명도를 밝게 하고, 법랑질의 광학적 특성을 증가시킨다.

• 복식
• /
• 제22권
• /
• pp.263-276
• /
• 1994

The achievement of notable social reoforms attained during the period of 19th and 20th centuries needlessly speaking remodelded the social environmental into several different patterns such as :1) high industrialization 2) propensity to consume 3) up graded overall social stands. Accordingly the industrial world of the but-tons too established the mess production syhstem by breaking from convention of hand-craft work of 17th century. The raw materials used in the production line on buttons during the 20th century are almost all-kind of materials one can possibly named including cheap plastic which enabled production lines to produce cheaper but higher productivities of the buttons being produced, The design (incused design) used in the 19-20h centuries are : men landscape, sports features, birds, livestocks, bugs, or geomatric features, tec, 1, The classification o f the buttons by materials Techniques shapes colors marking (Incused design) used in the productionof buttons in the England United States of America Laska Italy france Denmark Japan and India are categolizzed as : natural raw materials and syntetical resines. 1) Of the natural raw materials used are : Matal Enamel Iodine Agate, Coral, Green jade(Jasper) Granite, Wood, Ivory, Horn and bone etc. 2) The sythetical resin used in the button in-dustries are : Artificial jewell glass Acrylic material Styroform Celluloid and Nylon etc. 2. The thecnique quoted in producing buttons are hand craft work inlay work precision casting press mosic dye etching, processing, engraving and embossed carving etc. 3. The major designs used in the buttons in -dustries are : Round shape however elliptical column angular and edge shape often used. 4. The colors used are : The multi-colors were highly used than mono-colored materials such as : Adjoining Color and Contrast Color. The highest consideration to be considered in choosing the colors for the buttons are harmonization and matching factor with the garment or dresses to be wore. 5. The major design(incused design) on the buttons are embodiment and the design were also used in order of abstractive-combination abstractive with has offers much surprising. The button industries during the 19th and 20th centuries were not only the determination factors those can judge the value of self-pride of Nation and which were far beyond the in-dustrial arts in those days but also highly refelected and influenced by cultural sense ideology and self-pride of the Nation of those period. The followings are details of the role of the buttons categolized in the order of functional ornamental and symbolical aspects : 1. The functional role : The functional role of the buttons were simply designed for dress how-ever the buttons beyond from this role of function now a days. 2. The ornamental role : The ornamental role of he button beyond from this role of the button were effectuated by : 1) shape materials colors 2) technique locations size and design (incused design) 3) The ramaterials used for buttons shall not be over looked because it is highly depends on the taste sense and combination of harmony with the garment to be wore. 4) The color of the buttons are made well contrasted with the color of garments just as in the case of other artistical area such as matchs with the color of garment of contrast with brigtness of colors contrasted as complementary color and so and so. 5) The technique being adoped are: precision casting press handcraft inlay work etching mosic etc,. Since the buttons are no longer a simple catching devise used to fasten together the different part of the dress but now it has formed own and occupied the independent role in the garment or dresses location can be de-termined and varying depending on the ideas of designers. The size of the buttons has no specific limits, However the variation has widely dependined on the entire circumperence rhythm contrast harmonization of the garments. 3. The symbolical role : Since the button is no longer a just a simple devise for catching and fastening device used fastening together the different part of the garments but now were built a independent area as major part of the Garment and well reflected all kinds of occupations political background cultural as-pect etc. on the buttons. The design of buttons in the western circles are more simplified but they are polished looks and their techniques of manufacturing are comination of both machanis and handcraft. The colors used in the buttons are pretty well harmonized with garment(dress). Almost all kind of materials can be used in the but-tons however materials used in the buttons are : Bone of livestocks ivory, turtle shell are no longer used because the prevention of cruely of animal. On the contraly the level of buttons indus-try of Korea is far to reach and catch up with the level of western circles. It is highly suggested therefore the but-tons industrial field of Republic of Korea shall place and encouragement in producing beter industrial environment of the buttons based on the traditional and cultural aspect of republic of Korea to produce both manufacturing of qulified and best designed and colored buttons.

• Restorative Dentistry and Endodontics
• /
• 제36권4호
• /
• pp.324-335
• /
• 2011

연구목적: 복합레진의 색조를 색 성분요소인 CIE $Lab^*$ 각 성분요소로 측정하고, 동일 시편에 대해서 중합률과 2축 굴곡강도(biaxial flexural strength)를 측정하여 이들의 상관관계를 비교함으로써 복합레진의 중합전, 후의 색 성분요소가 중합률과 물성에 미치는 영향을 알아보고자 하였다. 연구 재료 및 방법: 두 종류의 복합레진 Premisa (Kerr Co.)와 Denfil (Vericom Co)의 법랑질 색조(A1, A2, A3, A4)와 상아질 색조(A2O, A3O)에 대해 원판형의 시편을 제작하여 색성분, 중합률 및 2축 굴곡강도를 측정하였다. 분광광도계를 이용하여 중합 전, 후 및 7일에 CIE $L^*,\;a^*,\;b^*$ 값을 측정하고, 같은 시편에 대해 근적외선분광기를 이용하여 중합 후 2시간과 7일에 중합률을 측정하였다. 중합 7일 후에 색 성분과 중합률을 측정한 후 만능시험기에서 2축 굴곡강도를 측정하였다. 색요소인 CIE $L^*,\;a^*,\;b^*$ 각각의 값과 중합률, 및 2축 굴곡강도의 상관관계를 분석하였다. 결과: 두 종의 광중합형 복합레진은 중합 전과 후에 색 성분요소, 즉 색조의 변화가 있었고, 광중합 후에도 시간이 경과하면서 중합률이 증가되었다. 중합률은 제품, 기간, 및 색조의 영향을 받고(3-way ANOVA, p < 0.05), 굴곡강도는 제품 및 색조의 영향을 받았다(2-way ANOVA, p < 0.05). 중합률은 Premisa 한 제품에서만 중합 전, 후의 CIE $a^*$ component와 유의한 상관관계를 보였고, 굴곡강도도 Premisa에서 CIE $a^*$ 및 CIE $b^*$ component와 음의 상관관계를 보였다(Pearson product moment correlation, p < 0.05). 결론: 광중합 복합레진의 중합률과 굴곡강도는 제품의 중합 전,후의 색 성분에 의해 영향을 받았다.