• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.1
• /
• pp.209-224
• /
• 1998

The purpose of this study was to compare the amount of calcium fluoride deposited on the enamel and dentin surface and to obtain information on the morphological change and crystallographic details of mineral deposition after 12,000ppm APF application in vitro. The bovine enamel and dentin blocks were randomly assigned to eight groups according to artificial caries lesion formation and difference of fluoride application time. The fluoride concentration and morphological characteristics on the treated enamel and dentin surface were investigated by using fluoride quantitative analysis and SEM. The powdered enamel and dentin of the intact bovine incisors were prepared for the X-ray diffraction analysis. The following results were obtained. 1. The amounts of KOH-soluble fluoride on the carious enamel and dentin surface after 24h APF application were higher than after only 5min APF application(p<0.05), but in the case of the sound enamel and dentin surface were similar after 5min and 24h application (P>0.05). The fluoride content was highly increased in the carious dentin as compared with sound dentin after APF application(P<0.05). 2. The carious enamel surface after APF application, the demineralized enamel surface were recovered a more dense enamel surface and precipitation of crystal was observed a distintive surface layer of spherical globules of about 1 m diameter. In the case of the fluorided carious dentin surface, precipitation of calcium fluoride-like material was deposited both inside the dentinal tubules as well as in the intertubular regions. 3. The crystallographic structure of powdered enamel and dentin after 24h APF application had large crystallities of apatite and CaF2 diffraction peaks in the enamel as compared with dentin. The diffraction data collected from the 27.50-29.50(2) angular range of the powdered enamel, the (105) apatite, (225) apatite and (111) CaF2 peaks of the enamel crystallities were detected after 24h APF application.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.159-166
• /
• 2008

The dental caries can be recovered or worse depending on the velocity of de- and remineralization of tooth. It is possible to remineralize the lesions by fluoride agent, but the results can be distinguished according to one's salivary flow rate, quantity of ion contents, and pH of the saliva. This article presents good results after applying the CPP-ACP paste for the patients who have incipient enamel caries. We instructed the patients to apply the paste everyday in the customed tray. We observed the white spot lesions without getting worse and reducing the size of lesions. After applying the CPP-ACP paste for 6 weeks, we concluded that; 1. It was possible to remineralize the incipient caries without preparation of the teeth. 2. CPP-ACP paste was successful for recovery of the demineralized lesions, especially for mild and moderate caries lesions, not for the severe developemental defects or chronic lesions. 3. CPP-ACP paste was efficient for pediatric patients, and the custumed tray was very useful for patients to apply the paste. 4. The ability of the patients for caring their oral hygiene was improved by routine check up and instructions.

• International Journal of Oral Biology
• /
• v.43 no.1
• /
• pp.37-42
• /
• 2018

It is noted that Streptococcus mutans (S. mutans) triggers dental caries establishment by two major factors: the synthesis of organic acids, which demineralize dental enamel, and the synthesis of glucans, which mediate the attachment of bacteria to the tooth surface. Therefore, it is noted that the development of a more effective, substantial and safe preventive agent that works against dental caries and periodontal disease is required at this time. For this reason, the present study was designed to investigate the effect of croton seed ethanol extracts on the growth, acid production, adhesion, and insoluble glucan synthesis of S. mutans. In this case, the ethanol extract of croton seed showed concentration dependent inhibitory activity against the growth, acid production and adhesion of S. mutans. Especially, it is important to note that it has produced significant inhibition at the concentration of 0.1 and 0.2 mg/ml as compared to the control group. Moreover, these results suggest that the application of croton seed extract may be considered to be a useful method for the prevention of dental caries.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.532-536
• /
• 2010

Hidden caries is a subtype of the occlusal pit and fissure caries type and is defined as a dentinal caries lesion near the occlusal surface of the tooth seen on a radiograph. In visual examination, the occlusal enamel is seen intact or is minimally perforated. Covert caries, Occlult caries or Fluoride syndrome are used as synonym. The percentage of occlusal dentin lesions that are clinically undetected ranges from 1.4-50%. Little is known about the mechanisms involved in the development of hidden caries. But it is thought that extensive use of topical fluoride or the special bacteriological profile has been a major factor. This case report is about detection and treatment of hidden caries of two children who visited the department of pediatric dentistry, Yonsei University Dental Hospital. The color of caries dentin found in hidden caries lesion is lighter than cavity forming caries, which makes it more difficult to detect caries by visual examination. Therefore diagnosis of hidden caries is often accomplished after clinical sign is recognized by patients. The use of advanced caries detection aids such as Diagnodent.. with periodic radiographic examination is seemed to be helpful for early detection of hidden caries.

• Journal of dental hygiene science
• /
• v.7 no.4
• /
• pp.207-211
• /
• 2007

Many studies reported that the presence of cervical enamel projection (CEP) in cemento-enamel junction(CEJ) is greatly related to periodontal disease. The aim of this study was to investigate the prevalence of enamel projections in buccal, mesial, distal and lingual(palatal) surface of maxillary and mandibular first and second molars on extracted teeth. Among 660 teeth extracted due to the periodontal disease and dental caries in Seoul National University Dental Hospital was examined, 530 teeth which has distinct CEJ were examined with 8 times x electronic magnifier by one examiner. The prevalence of CEP for maxillary teeth (45.49%) was higher than that of mandible (39.62%). The first molar (45.22%) had more CEP than second (39.89%). Furthermore, buccal surface had highest incidence of CEP than other surfaces. The results of this study imply that the clinicians should take good care of the prevalence of CEP when scaling or root planning, plaque control instruction and periodontal surgery.

• Imaging Science in Dentistry
• /
• v.49 no.2
• /
• pp.97-102
• /
• 2019

Purpose: This study was conducted to evaluate the effect of different spatial resolutions of a photostimulable phosphor plate (PSP) radiography system on the detection of proximal caries lesions. Materials and Methods: Forty-five extracted human permanent teeth were radiographed using a PSP system (VistaScan Perio Plus) and scanned at the 4 resolutions (10 lp/mm, 20 lp/mm, 25 lp/mm, and 40 lp/mm) available in the system. Three independent examiners scored the images for the presence and absence of proximal caries lesions using a 5-point scale. The presence or absence of caries was confirmed by histological sections of the examined teeth (defined as the gold standard). Intra- and inter-observer reproducibility was calculated by the weighted kappa test. One-way analysis of variance with the post hoc Tukey test was used to compare the area under the receiver operating characteristic curve for the classifications made with each resolution. Results: For the detection of enamel lesions, the spatial resolution of 10 lp/mm was significantly superior to the other resolutions. However, the spatial resolution did not affect the detection of caries lesions in dentin (P>0.05). Conclusion: Spatial resolution may influence the accuracy of the detection of incipient caries lesions in radiographs with PSP plates. Images with low spatial resolution seem to be more appropriate for this purpose.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.506-515
• /
• 2004

The objective of this study was to compare the rate of in vitro demineralization of bovine permanent (BP), human deciduous (HD) and human permanent (HP) enamel. Twenty aye flattened and polished enamel samples for each group (BP, HD, HP) were immersed in a demineralizing solution (0.1 mol/L lactic acid, 0.2% Carbopol 907, and 50% saturated hydroxyapatite) for 1, 2, 4 or 8 days. All 25 samples from each group were subjected to Quantitative light induced fluorescence analysis (QLF) and 5 samples from each group were randomly selected for Transverse Microradiography analysis (TMR). Integrated mineral loss (IML) and lesion depth (LD) were determined by TMR. The fluorescence radiance (FR) of sound enamel $(FR_S)$, demineralized enamel $(FR_D)$ were determined by QLF and FR ratio $(FR_D/FR_S)$ was calculated. Bovine enamel samples showed significant correlation between FR ratio and lesion depth(p<0.05) and deciduous enamel samples does not showed significant correlation between FR ratio and lesion depth(p>0.05). Permanent enamel samples showed significant correlation between FR ratio and lesion depth(p<0.05) The constant of demineralization time between FR ratio from regression analysis were as follows: bovine enamel was -4.643(p<0.05) deciduous enamel was -5.421(p<0.05) and permanent enamel was -4.435(p<0.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.2
• /
• pp.190-199
• /
• 2019

$Carbopol^{(R)}$ 907 used as surface protecting agent in White's method is the one of the artificial caries lesion producing solution was discontinuing of production. New surface protecting material to substitute of $Carbopol^{(R)}$ 907 was required. The author prepared an artificial caries lesion producing solution as follows White's method with $Carbopol^{(R)}$ 907 and also another artificial caries lesion producing solution with $Carbopol^{(R)}$ $2050^{(R)}$. 96 flattened and polished enamel samples were immersed in a demineralizing solution of 0.1 mol/L lactic acid, 0.2% carboxyvinylpolymer and 50% saturated hydroxyapatite for 1, 2, 3, 4, 5, 6, 7, 9, 11, 15, 18 and 20 days. All samples from each group were subjected to polarized microscopy observed and image analysis for measuring the lesion depth. From the review of polarized images, the artificial caries lesion producing solution using $Carbopol^{(R)}$ 907 and $Carbopol^{(R)}$ 2050 can produced an artificial caries that was very similar to natural caries characters. From the regression analysis of the lesion depth produced by the artificial caries lesion producing solution using $Carbopol^{(R)}$ 907 and $Carbopol^{(R)}$ 2050, $Carbopol^{(R)}$ 2050 estimate as Y = 9.8X + 8.0 and $Carbopol^{(R)}$ 907 was Y = 8.4X - 0.4. R square value of $Carbopol^{(R)}$ 2050 and $Carbopol^{(R)}$ 907 was 0.965 and 0.945 respectively. The rate of demineralization by the artificial caries lesion producing solution using $Carbopol^{(R)}$ 2050 was faster than that of $Carbopol^{(R)}$ 907. And R square value of $Carbopol^{(R)}$ 2050 and $Carbopol^{(R)}$ 907 were very high and it means that the lesion depth was very high coefficient to demineralization period.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.13-23
• /
• 2010

This study was performed to compare the quality of image processing between the newly developed prototype using light emitting diode(LED) and the conventional $DIFOTI^{TM}$ system(EOS Inc., USA). To estimate the optimal light emitting power for the improved images, primary enamel surfaces treated under Carbopol 907 de-mineralizing solution were taken daily during 20 days of experimental periods by both DIFOTI systems. The results of comparative analyses on the images obtained from both systems with polarized image as gold standard can be summarized as follows: 1. Trans-illumination indices of images taken from primary enamel surfaces were decreased with time in both systems. 2. The differences of intensity of luminance between sound and de-mineralized enamel surface in prototype DIFOTI system was shown to be relatively smaller than conventional $DIFOTI^{TM}$ system. 3. From the comparative analysis of images from both DIFOTI system with polarized images as gold standard, the difference between sound and de-mineralized enamel surface of intensity of luminance of $DIFOTI^{TM}$ system was more correlated to polarized images than prototype of DIFOTI system. With the optimal LED emitting power, the control of aperture of digital camera is considered as the another key factor to improve the DIFOTI images. For the best image quality and analysis, the development of the improved image processing software is required.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.1
• /
• pp.51-70
• /
• 1999

Dental porcelain is one of the materials of choice for restoration where esthetics is of concern, but has a considerable potentials of wear. The wear of enamel is variable when opposed by different porcelain systems and surface conditions, and the exposed dentine and opaque porcelain due to clinical failure is expected to have high potentials of wear. The purpose of this study was to investigate the wear effects of self-glazed, polished incisal porcelain. polished dentine and opaque porcelain against human enamel in the laboratory by use of a pin-on-disk type wear tester. 4 types of dental porcelain($Vita-{\Omega}$, Ceramco-II, Vintage powder $Vita-{\alpha}$ of In-Ceram system) and type IV gold alloy as cotrol group were used for test specimens. Intact buccal cusps of maxillary premolar were used for enamel specimens, and the cusp converged to a point and was devoid of visible abrasion, caries, decalcification. The upper part was the cusp of a maxillary premolar and the lower part was a porcelain specimen. The enamel wear was deter-mined by weighing the cusp before and after each test. Surface profilometer was used to quantitate wear of the porcelain specimens. Vicker's hardness tester was used to evaluate the surface hardness of test specimens. The SEM was used to evaluate the wear surfaces. The results were as follows : 1 Self-glazed porcelain produced more enamel wear than polished porcelain, especially the enamel wear of $Vita-{\alpha}$ self-glazed porcelain was 3.2 times more than that of other groups. 2. Opaque porcelain produced least porcelain wear, $Vita-{\alpha}$ self-glazed porcelain produce greatest porcelain wear, but there was no statistically significant difference between the groups(p>0.05). 3. The enamel wear of dentine porcelain was 3.8 times more than that of polished inisal porcelain(p<0.05), and the enamel wear of opaque porcelain was 1.9 times more than that of polished inisal porcelain, but there was no statistically significant difference between the groups(p>0.05) 4. Overglazed porcelain produced less enamel wear than self-glazed porcelain, and more enamel wear than polished porcelain, but there was no statistically significant difference between the groups(P>0.05). 5. The hardness number of $Vita-{\Omega}$ dentine and Ceramco-II opaque porcelain was larger, but that of Vintage dentine and $Vita-{\alpha}$ self-glazed porcelain was similar to other groups. 6. Examination of SEM photographs revealed that overglazed porcelain had smoother surface than self-glazed porcelain, and self-glazed porcelain had smoother surface than polished porcelain. Much polishing scratches and larger porosities were observed on the opaque porcelain specimen, and much polishing scratchess and small porosities were observed on the dentine porcelain specimen.