• The Journal of Advanced Prosthodontics
• /
• 제9권1호
• /
• pp.57-66
• /
• 2017

PURPOSE. Cementation failures of restorations are frequently observed in clinical practice. The purpose of this study is to compare the effect of initial and repeated bonding on the bond strengths of different resin cements to enamel and dentin. MATERIALS AND METHODS. Ninety human maxillary central incisors were bisected longitudinally. The 180 tooth halves were divided into 2 groups (n = 90) for enamel and dentin bonding. The enamel and dentin groups were further divided into 3 groups (n = 30) for different resin cement types. Composite resin (Filtek Ultimate) cylinders ($3{\times}3\;mm$) were prepared and luted to enamel and dentin using Variolink II (Group V), RelyX ARC (Group R), or Panavia F 2.0 (Group P) resin cement. After 24 hours, initial shear bond strengths of the resin cements to enamel and dentin were measured. Using new cylinders, the specimens were de-bonded and re-bonded twice to measure the first and the second bond strengths to enamel and dentin. Failure modes and bonding interfaces were examined. Data were statistically analyzed. RESULTS. Initial and repeated bond strengths to enamel were similar for all the groups. The first ($15.3{\pm}2.2\;MPa$) and second ($10.4{\pm}2.2\;MPa$) bond strengths to dentin were significantly higher in Group V (P<.0001). Second bond strengths of dentin groups were significantly lower than initial and first bond strengths to dentin (P<.0001). CONCLUSION. All resin cements have similar initial and repeated bond strengths to enamel. Variolink II has the highest first and second bond strength to dentin. Bond strength to dentin decreases after the first re-bonding for all resin cements.

• International Journal of Oral Biology
• /
• 제41권2호
• /
• pp.89-96
• /
• 2016

Tooth development shows dynamic morphological changes from the stages of cap to hard tissue formation and is strictly regulated during development. In the present study, we compared expression and localization of 3 major enamel matrix proteins in rats: amelogenin, enamel and ameloblastin. DD-PCR and RT-PCR revealed differential expression of the major proteins from the cap stage to root stage. Immunofluorescence staining results indicated that amelogenin was not detected in either inner enamel epithelium or reduced enamel epithelium, but highly immunoreactive in preameloblasts and ameloblasts; in addition, it was sporadically expressed in preodontoblasts abutting preameloblasts. Ameloblastin expression was also observed in not only differentiated ameloblasts but also osteoblasts. Immunoreactivity to ameloblastin in ameloblasts was strong in Tomes' processes. Enamelin was exclusively localized along the entire newly formed and maturing enamel. Enamelin was largely localized in near Tomes' processes and enamel rods in maturing enamel. Alendronate treatment resulted in down-regulation of amelogenin and ameloblastin at both transcription and translation levels; whereas, enamelin expression was unchanged in response to the treatment. These results suggested that amelogenin, ameloblastin and enamelin might be implicated in cell differentiation, adhesion of ameloblasts to enamel and enamel crystallization during enamel matrix formation, respectively.

• Restorative Dentistry and Endodontics
• /
• 제15권1호
• /
• pp.165-173
• /
• 1990

The purpose of this study was to measure the effect of two commercially available composite resin systems and GC dentin cement on the shear bond strength of the etched porcelain to enamel and dentin. The specimens were divided into six groups, and each group was as follows. Group I : etched enamel-dentin/enamel bonding agent-CHOICE-unfilled resin-silane-etched porcelain Group II : etched enamel-Scotchbond 2-Silux-unfilled resin-silane-etched porcelain. Group III : dentin-dentin/enamel bonding agent-CHOICE-unfilled resin-silane-etched porcelain Group IV : dentin-Scotchbond 2-Silux-unfilled resin-silane-etched porcelain Group V : dentin-GC dentin cement-dentin/enamel bonding agent-CHOICE-unfilled resin-silane-etched porcelain Group VI : dentin-GC dentin cement-Scotchbond 2-Silux- unfilled resin-silane-etched porcelain Following polymerization. the specimens were stored in 100% humidity for 24 hours before testing. Shear bond strength was measured with Instron universal testing machine. The results obtained were as follows; 1. The shear bond strength of the etched porcelain to enamel was greater than that of the etched porcelain to dentin. 2. The shear bond strength of Silux-Scotchbond 2 to dentin was greater than that of CHOICE-dentin/enamel bonding agent. 3. There was no significant difference in shear bond strength to dentin between the groups lined with GC dentin cement. 4. The shear bond strength of Silux-Scotchbond 2 to dentin was greater than that of the groups lined with GC dentin cement. 5. There was no significant difference in shear bond strength to dentin between the groups lined with GC dentin cement and the group directly bonded with CHOICE-dentin/enamel bonding agent.

• 한국치위생학회지
• /
• 제17권5호
• /
• pp.817-826
• /
• 2017

Objectives: The aim of this study was to investigate the effects of bamboo salts on remineralization effects on subsurface of artificial carious enamel. Methods: Incipient carious enamel was formed in permanent bovine incisors and then specimens were divided into three groups randomly: 3% bamboo salt (BS), 2% (NaF) and the solution of mixed 3% BS and 2% NaF. For remineralization, specimens of each of the three groups were treated for 24 hrs at $37^{\circ}C$ incubator. After treatment, specimens were analyzed using SEM and VHN. Statistical analysis used was one-way ANOVA. Results: In SEM observation, the BS group showed narrower distances between enamel rods than the cases of incipient subsurface caries enamel. The NaF and BS+NaF groups showed that the enamel rods near the surface were destructed, and innumerable round small particles were deposited near the surface of enamel. The BS+NaF group showed more minerals attachment between enamel rods than the cases of other groups. The differences in subsurface microhardness (${\Delta}VHN$) increased all of three groups in total by $80{\mu}m$. The ${\Delta}VHN$ of the BS+NaF group increased significantly more than NaF and BS groups in depth of $50{\mu}m$, $80{\mu}m$. Conclusions: The 3% bamboo salt with 2% NaF solution was found to increase subsurface hardness of incipient caries enamel. Thus, bamboo salt will be used to contribute to prevention on dental caries.

• 대한소아치과학회지
• /
• 제8권1호
• /
• pp.47-53
• /
• 1981

Author have studied with electron microscope on the effect of biscuit solution dissolved in natural saliva on the enamel surface of the primary teeth. Four of the teeth were natural primary teeth and the other four teeth were treated in acidulated phosphate fluoride during four minute. The obtained results were as follows; 1. The pH value of the solution was decreased according to the time passed, and gradually became 3.75 at the end of 48 hours. 2. Natural teeth appeared normal enamel surface appearance during first 12 hours, and at 24 hours, it appeared some degree of decalcified appearance near the enamel rods and surfaces. 3. The decalcified appearances of the enamel surfaces of the fluoride treated teeth were not significant compared with the fluoride untreated teeth. 4. Streptococci of the enamel surface were increased according to the time passed.

• 대한치과교정학회지
• /
• 제5권1호
• /
• pp.21-24
• /
• 1975

The purpose of this study was to investigate the effect of sinc phosphate cement on the enamel surface of extracted teeth. The tooth was placed in a test tube, which was subjected to 5ml of 0.2M acetate buffer at pH 4 by 'window technique.' The calcium content of the acetate buffer was determined by the Perkin-Elmer Model 303 Atomic Absorption Spectrophotometer. The obtained results were summarized in the following. 1. The solubility of enamel is $0.92mg/cm^2$. ml in control group. 2. The solubility of enamel is increased by treating these with zinc phosphate cements. 3. The solubility of enamel is $0.69mg/cm^2$. ml by treating with Lee Smith cement. 4. The solubility of enamel is $0.30mg/cm^2$. ml by treating with G-C's cement.

• Imaging Science in Dentistry
• /
• 제45권3호
• /
• pp.181-185
• /
• 2015

Numerous cases of enamel renal syndrome have been previously reported. Various terms, such as enamel renal syndrome, amelogenesis imperfecta and gingival fibromatosis syndrome, and enamel-renal-gingival syndrome, have been used for patients presenting with the dental phenotype characteristic of this condition, nephrocalcinosis or nephrolithiasis, and gingival findings. This report describes a case of amelogenesis imperfecta of the enamel agenesis variety with nephrolithiasis in a 21-year-old male patient who complained of small teeth. The imaging modalities employed were conventional radiography, cone-beam computed tomography, and renal sonography. Such cases are first encountered by dentists, as other organ or metabolic diseases are generally hidden. Hence, cases of amelogenesis imperfecta should be subjected to advanced diagnostic modalities, incorporating both dental and medical criteria, in order to facilitate comprehensive long-term management.

• Restorative Dentistry and Endodontics
• /
• 제5권1호
• /
• pp.7-12
• /
• 1979

After applying three types of composite resins - Hi-Pol composite with Enamel bond, Hi-Pol composite without Enamel bond, Restodent - to the intact and the ground surface of tooth that had been acid etched for one or two minutes, the author observed the penetration of these resins into the acid etched enamel surface with scanning electron microscope. The results were as follows. 1. All the experimented materials showed the penetration into the acid etched enamel surface, and the average depth of penetration was 7 microns. 2. There was no significant difference in the penetration of these three resins despite different etching, time. 3. The grinding of the Enamel surface before acid - etching was not effective in altering the depth of penetration of these materials.

• 대한치과교정학회지
• /
• 제25권2호
• /
• pp.165-174
• /
• 1995

이 연구의 목적은 교정용 bracket부착에 의한 교정치료시 법랑질 표면에 나타나는 탈회 형태 및 손상정도를 평가하고 이를 개선시킬수 있는 방법에 대하여 알아보기 위함이다. 건전한 법랑질 표면을 갖는 40개의 소구치를 산부식과 다양한 불소도포에 의해 처리한 뒤 환자의 구강에서 3개월동안 유지시켰다. 모든 견본 소구치를 발거하여 주사 전자현미경으로 법랑질 표면을 평가하였다. 이 연구로부터 얻어진 결과는 다음과 같다. 1. Bracket 부착에 의한 법랑질 표면에 어느 정도 탈회와 손상이 나타났다. 2. $2\%$ NaF을 전기이온 도포한 Group 6이 건전한 법랑질 표면에 가장 유사한 형태로 개선되었다. 3. 산 부식 후 아무런 처리도 하지 않은 Group 2에서 불소 도포한 다른 Group들 보다 더 큰 법랑질 탈회와 손상이 나타났다. 4. Bracket 부착에 의한 법랑질 표면의 탈회와 손상 정도는 불소 도포방법에 의하여 개선이 이루어 졌다.

• 치과방사선
• /
• 제25권2호
• /
• pp.409-422
• /
• 1995

The purpose of this study was to investigate the effects of radiation on the formation of rat molar enamel at the developmental stage. The experimental animals were divided into five groups and were irradiated single dose of 396cGy ; 1 st group on 14th day of gestation, 2nd group on 19th day of gestation, 3rd group on 3 days after birth, 4th group on 8 days after birth, 5th group on 28 days after birth. The control and 1, 2, 3, and 4th experimental groups were sacrificed on 2, 4, and 6 weeks and the 5th groups were sacrificed on 1 day and 2 weeks after irradiation. Distal 1/2 and occlusal 1/3 enamel surface of lingual side of lingual cusp, and fractured surface of lingual side of lingual cusp in a longitudinal direction of the mandibular first molar were examined using scanning electron microscope. The following results were obtained. 1. The roughness of enamel surface and enamel hypoplasia were increased in a sequence of 4th, 1st, 2nd, and 3rd experimental group, and the enamel cracks were increased in the 1st and 2nd experimental group. 2. The pattern of enamel hypoplasia had a network form on the 1st and 2nd experimental group, and appeared a linear shape on the 3rd experimental group, and then the crator-like enamel defects were observed in all experimental groups (especially 1st and 2nd experimental group) except 5th. 3. Dentinoenamel junction showed the clear-cut and straight appearance except 5th experimental group. 4. There was no significant difference between 5th experimental and control group.