• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.560-567
• /
• 1997

A new approach to obtain stable $W_1/O/W_2$ multiple emulsions has been studied ; The basis of the interfacial interaction between a PCL-PEO-PCL triblock copolymer and a lipophilic emulsifier in the dispersed oil phase was examined. $W_1/O/W_2$ multiple emulsions were prepared by the two-step method. Arlacel P-l35 was used as a liphophilic emulsifier and Synperonic PE/F 127 as a hydrophilic one. Eutanol-G was used as an oil phase. NaCl was encapsulated within the multiple emulsion droplets as the internal marker and its release rate studies were carried out. The suability of the multiple emulsions have been assessed by measuring Separation Ratios(%) and microscopic observations. The release of NaCl was significantly reduced in $W_1/O/W_2$ multiple emulsions containing PCL-PEO-PCL triblock copolymer(2k-4k-2k or 6k-4k-6k) in the oil phase. It may be concluded that the copolymer and the emulsifier form effective interfacial complex to enhance stability and to control the release rate. The effective diffusion coefficients of the NaCl were estimated as $2.64{\times}10^{-15}s$and $3.23{\times}10^{-16}gcm^2/s$ for the $W_1/O/W_2$ multiple emulsion containing 1.2 wt % of PCL-PEO-PCL triblock copolymers with compositions of 2k-4k-2k and 6k-4k-2k, respectively. The rate of release decreased with the increase of the initial concentration of NaCl. The results were examined in view of Higuchi mechanism. A kinetic model which is similar to the model for release of dispersed drugs from a polymeric matrix was found to be suitable for the release of NaCl from $W_1/O/W_2$ multiple emulsions.

• Food Science of Animal Resources
• /
• v.26 no.3
• /
• pp.297-305
• /
• 2006

This study was conducted to evaluate the quality characteristics of low-fat emulsion type sausages containing 0% tomato powder (C), 5.0% ground raw tomato paste (T1) and 0.5% freeze dried tomato powder (T2) during storage at $5{\pm}1^{\circ}C$ for 30 days. The crude protein content of T2 was significantly lower (p<0.05) than that of the other sausage types. Moisture, crude fat and crude ash contents of the sausages during storage were not affected by the addition of tomato. The pH and shear force ($kg/cm^2$) values of C were significantly higher (p<0.05) than those of T1 and T2. There was no significant difference among the different sausages in cooking loss, ranging from $13.00{\sim}14.98%$. The WHC values of T1 and T2 were significantly higher (p<0.05) than that of C. The values of TBARS were significantly (p<0.05) increased for ail sausages following storage. The TBARS value (mg MA/kg) of C was significantly higher (p<0.05) than those of T1 and T2 at 15 days of storage, however T1 was significantly higher (p<0.05) than the other sausages after 30 days of storage. The meat color values tended to decrease with increased storage time. Microorganism analysis revealed that all sausage types did not reach $4.4log_{10}CFU/g$ until 30 days of storage. The texture, brittleness, Hardness, and springiness of each sausage type were not significantly different after 1 day of storage, while the cohesiveness, gumminess and chewiness of T1 and T2 were significantly higher (p<0.05) than that of C. T1 and T2 sausages had a slightly higher score regarding color, aroma, tenderness and overall acceptability, however the sensory evaluation score among the different sausage types was not significantly different (p>0.05). In conclusion, low-fat sausage with added tomato showed higher lipid oxidative stability during storage than sausage to which no tomato was added.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.159-165
• /
• 2004

This study described about method that forms liquid crystal gel (LCG) by main ingredient with hydrogenated lechin (HL) in O/W emulsion system. Result of stability test is as following with most suitable LCG's composition. Composition of LCG is as following, to form liquid crystal, an emulsifier used 4.0wt% of cetostearyl alcohol (CA) by 4.0wt% of HL as a booster. Moisturizers contained 2wt% of glycerin and 3.0wt% of 1,3-butylene glycol (1,3-BG). Suitable emollients used 3.0wt% of cyclomethicone, 3.0wt% of isononyl isononanoate (ININ), 3.0wt% of cerpric/carprylic triglycerides (CCTG), 3.0wt% of macademia nut oil (MNO) in liquid crystal gel formation. On optimum conditions of LCG formation, the pHs were formed all well under acidity or alkalinity conditions (pH=4.0-11.0). Considering safety of skin, pH was the most suitable 6.0${\pm}$1.0 ranges. The stable hardness of LCG formation appeared best in 32 dyne/$\textrm{cm}^2$. Particle of LCG is forming size of 1-20$\mu\textrm{m}$ range, and confirmed that the most excellent LCG is formed in 1-6$\mu\textrm{m}$ range. According to result that observe shape of LCG with optical or polarization microscope, LCG could was formed, and confirmed that is forming multi -layer lamellar type structure around the LCG. Moisturizing effect measured clinical test about 20 volunteers. As a result, moisturizing effect of LCG compares to placebo cream was increased 36.6%. This could predicted that polyol group is appeared the actual state because is adsorbed much to round liquid crystal droplets to multi-lamellar layer's hydrophilic group. It could predicted that polyol group is vast quantity present phase that appear mixed because is adsorbed to round liquid crystal to multi-lamellar layer's hydrophilic group. This LCG formation theory may contribute greatly in cosmetics and pharmacy industry development.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.181-187
• /
• 2004

Preparations of mesoporous materials using various templates and their applicability have been intensively investigated for many years. We studied on synthesizing mesoporous Ti02 with pores in which sensitive compounds having weak physico-chemical properties such as thermal or UV irradiation and low solubility in solvent are trapped. Prior to trapping OMC in the pores of mesoporous titania, OMC was nano-emulsified in O/W system using Lecithin. Thereafter the OMC was trapped in the pores of mesoporous titania using sol-gel method. Main focus of this work is to prepare OMC-trapped mesoporous titania and to trace the stability and solubility of nano-emulsified OMC in the pores of mesoporous titania, and compared with that of mesoporous silica. OMC-trapped mesoporous Inorganic-Organic hybrid titania showed higher factors in sun protecting and a skin penetration phenomenon was reduced.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.1
• /
• pp.55-64
• /
• 2022

The potassium cream soap with fatty acid called cleaning foam has a crystal gel structure, and unlike an emulsion system, it is weak to shear stress and shows characteristics that are easily separated under high temperature storage conditions. The crystal gel structure of cleansing foams is significantly influenced by the nature and proportion of fatty acids, degree of neutralization, and the nature and proportion of polyols. In order to investigate the effect of these parameters on the crystal gel structure, a ternary system consisting of water/KOH/fatty acid was investigated in this study. The investigation of differential scanning calorimeter (DSC) revealed that the eutectic point was found at the ratio of myristic acid (MA) : stearic acid (SA) = 3 : 1 and ternary systems were the most stable at the eutectic point. However, the increase in fatty acid content had little effect on stability. On the basis of viscosity and polarized optical microscopy (POM) measurements, the optimum degree of neutralization was found to be about 75%. The system was stable when the melting point (T_m) of the ternary system was higher than the storage temperature and the crystal phase was transferred to lamellar gel phase, but the increase in fatty acid content had little effect on stability. The addition of polyols to the ternary system played an important role in changing the T_m and causing phase transition. The structure of the cleansing foams were confirmed through cryogenic scanning electron microscope (Cryo-SEM), small and wide angle X-ray scattering (SAXS and WAXS) analysis. Since butylene glycol (BG), propylene glycol (PG), and dipropylene glycol (DPG) lowered the T_m and hindered the lamellar gel formation, they were unsuitable for the formation of stable cleansing foam. In contrast, glycerin, PEG-400, and sorbitol increased the T_m, and facilitated the formation of lamellar gel phase, which led to a stable ternary system. Glycerin was found to be the most optimal agent to prepare a cleansing foam with enhanced stability.

• Food Science of Animal Resources
• /
• v.38 no.4
• /
• pp.718-726
• /
• 2018

The aim of this study was to evaluate the effects of pork and tuna levels on the quality characteristics of frankfurters and to establish a suitable percentage of added tuna. The levels of pork meat (PM) and yellow-fin tuna (YFT) in the test frankfurters were as follows: 100% PM (control), 90% PM+10% YFT (T1), 80% PM+20% YFT (T2), 70% PM+30% YFT (T3), 60% PM+40% YFT (T4), and 50% PM+50% YFT (T5). The pH of the frankfurter batters significantly decreased with increasing tuna levels, because the pH of the tuna is lower than that of the pork. The water holding capacity did not differ significantly in frankfurters containing up to 30% tuna, whereas that of the 40% tuna-containing frankfurter was significantly lower than the control. Cooking loss did not differ significantly. At up to 10% tuna, apparent viscosity did not differ significantly, whereas at 20% tuna, it was significantly lower than the control. Fat separation and total expressible fluid separation at up to 30% tuna did not differ from the control; however, when more than 30% was added, higher losses were observed. The hardness of frankfurters containing more than 40% tuna was lower than that of the control, but there was no significant difference in springiness. The overall acceptability of frankfurters manufactured with up to 30% tuna did not differ significantly from the control. These results suggest that the addition of 30% tuna does not affect the quality of frankfurters made from pork.

• Food Science of Animal Resources
• /
• v.29 no.4
• /
• pp.475-481
• /
• 2009

The effects of wheat fiber (WF) and isolated soy protein (ISP) on the physicochemical and sensory properties of frankfurter-type sausages were evaluated. The frankfurters were formulated with 2% WF (T1), 2% ISP (T2), and 1% WF plus 1% ISP (T3). The pH of all the samples ranged from 5.90 to 5.94 (p>0.05), and the CIE $L^{\ast}$ values of the WF and ISP treatments were higher than those of the control, but the CIEs of $a^{\ast}$ and $b^{\ast}$ were lower than those of the control (p<0.05). The cooking losses with the treatments were lower than the cooking loss with the control, but there were no significant differences among all the treatments. The treated frankfurters showed better emulsion stability than the control, and T1 had the greatest hardness, cohesiveness, and viscosity (p<0.05). All the frankfurters scored the same for sensory color (p>0.05), and the sensory properties of flavor, juiciness, and overall acceptability of T1 resulted in satisfactory sensory scores. The best results were conclusively obtained with the frankfurters that contained 2% WF. This study showed the potential of WF to be used in frankfurters as a substitute for ISP.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.12
• /
• pp.1839-1845
• /
• 2010

This study was conducted to evaluate the effects of salt soluble protein extracts from anchovy (ASSPE) on sausage during storage at $10^{\circ}C$. Sausages were produced containing 5 and 10% ASSPE. Sausages containing ASSPE showed no significant differences in emulsion stability, color, pH, moisture, viable cell count, and VBN compared to the control. The hardness significantly increased with the addition of ASSPE, and sausages containing 5% ASSPE were the highest in gumminess. In the sensory evaluation, sausages containing 5% ASSPE had the highest score in appearance and springiness. In conclusion, the addition of ASSPE in sausage had no effects on storage characteristics, but had a good effect on improvement of quality and sensory characteristics. Especially, 5% ASSPE sausage had good texture and high sensory characteristics due to increased binding capacity. These results suggest that 5% ASSPE may improve the quality and sensory characteristics of sausage.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.1
• /
• pp.45-50
• /
• 1992

To utilize shellfish by-products effectively, chitin, chitosan, and microcrystalline chitin were prepared from 6 kinds of crustacean shells(Antarctic krill, Euphausia superba; Red snow crab, Chinonecetes japonicus: Daelongsuyum shrimp, Solenocera prominentis: Lobster, Linuparus trigonus: Gasibal shrimp, Nephrops thomsoni: Blue crab, Portunus trituberculatus) and their functional properties were studied. Apparent volume(AV), settling volume(SV), water binding capacity(WBC), and fat binding capacity(FBC) of various chitins, chitosans, and microcrystalline chitins ranged from $3.1\pm0.1ml/g\;to\;27.0\pm0.2ml/g$ from $5.1\pm0.1ml/g\;to\;45.0\pm0.2ml/g,\;from\;318\pm40g/100g\;to\;2,382\pm12g/100g,\;and\;from\;235\pm20g/100g\;to\;2,169\pm20g/100g$, respectively, and the krill chitin and chitosan had the highest AV, SV, WBC, and FBC of them. Chitins and chitosans did not produce emulsion but microcrystalline chitins showed emulsifying properties. Emulsifying capacity and stability of various microcrystalline chitins ranged from $18.2\pm4.0\%\;to\;50.1\pm2.5\%\;and\;from\;15.2\pm3.5\%\;to\;31.1\pm1.0\%$, respectively. Dye binding capacity of microcrystalline chitins was higher than that of chitins or chitosans.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.2
• /
• pp.157-162
• /
• 1995

When fish meat is washed for the processing of surimi, about 50ff of lipid in the fish meat is removed from the fish meat to the effluent. The removed lipid was easily recovered by centrifugation or filteration of wastewater washed fish meat. Then, the recovered lipid was utilized as a material of mayonnaise sauce processing. The major fatty acids in the recovered lipids are $C_{16:0},\;C_{18:0},\;C_{16:1},\;C_{20:5},\;and\;C_{22:6}$ Polyenoic fatty acids were composed of $33.6\%$ to total fatty acids. When the recovered lipid was substituted for soybean oil in processing of mayonnaise sauce, the maximum percentage of substitution ratio presumed to be $30\%$ according to viscosity, color difference, and emulsion stability evalution for the substituted ones.