• 한국유가공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.59-60
• /
• 2002

Edible films such as wax coatings, sugar and chocolate covers, and sausage casings, have been used in food applications for years$^{(1)}$ However, interest in edible films and biodegradable polymers has been renewed due to concerns about the environment, a need to reduce the quantity of disposable packaging, and demand by the consumer for higher quality food products. Edible films can function as secondary packaging materials to enhance food quality and reduce the amount of traditional packaging needed. For example, edible films can serve to enhance food quality by acting as moisture and gas barriers, thus, providing protection to a food product after the primary packaging is opened. Edible films are not meant to replace synthetic packaging materials; instead, they provide the potential as food packagings where traditional synthetic or biodegradable plastics cannot function. For instance, edible films can be used as convenient soluble pouches containing single-servings for products such as instant noodles and soup/seasoning combination. In the food industry, they can be used as ingredient delivery systems for delivering pre-measured ingredients during processing. Edible films also can provide the food processors with a variety of new opportunities for product development and processing. Depends on materials of edible films, they also can be sources of nutritional supplements. Especially, whey proteins have excellent amino acid balance while some edible films resources lack adequate amount of certain amino acids, for example, soy protein is low in methionine and wheat flour is low in lysine$^{(2)}$. Whey proteins have a surplus of the essential amino acid lysine, threonine, methionine and isoleucine. Thus, the idea of using whey protein-based films to individually pack cereal products, which often deficient in these amino acids, become very attractive$^{(3)}$. Whey is a by-product of cheese manufacturing and much of annual production is not utilized$^{(4)}$. Development of edible films from whey protein is one of the ways to recover whey from dairy industry waste. Whey proteins as raw materials of film production can be obtained at inexpensive cost. I hypothesize that it is possible to make whey protein-based edible films with improved moisture barrier properties without significantly altering other properties by producing whey protein/lipid emulsion films and these films will be suitable far food applications. The fellowing are the specific otjectives of this research: 1. Develop whey protein/lipid emulsion edible films and determine their microstructures, barrier (moisture and oxygen) and mechanical (tensile strength and elongation) properties. 2. Study the nature of interactions involved in the formation and stability of the films. 3. Investigate thermal properties, heat sealability, and sealing properties of the films. 4. Demonstrate suitability of their application in foods as packaging materials. Methodologies were developed to produce edible films from whey protein isolate (WPI) and concentrate (WPC), and film-forming procedure was optimized. Lipids, butter fat (BF) and candelilla wax (CW), were added into film-forming solutions to produce whey protein/lipid emulsion edible films. Significant reduction in water vapor and oxygen permeabilities of the films could be achieved upon addition of BF and CW. Mechanical properties were also influenced by the lipid type. Microstructures of the films accounted for the differences in their barrier and mechanical properties. Studies with bond-dissociating agents indicated that disulfide and hydrogen bonds, cooperatively, were the primary forces involved in the formation and stability of whey protein/lipid emulsion films. Contribution of hydrophobic interactions was secondary. Thermal properties of the films were studied using differential scanning calorimetry, and the results were used to optimize heat-sealing conditions for the films. Electron spectroscopy for chemical analysis (ESCA) was used to study the nature of the interfacial interaction of sealed films. All films were heat sealable and showed good seal strengths while the plasticizer type influenced optimum heat-sealing temperatures of the films, 130$^{\circ}$C for sorbitol-plasticized WPI films and 110$^{\circ}$C for glycerol-plasticized WPI films. ESCA spectra showed that the main interactions responsible for the heat-sealed joint of whey protein-based edible films were hydrogen bonds and covalent bonds involving C-0-H and N-C components. Finally, solubility in water, moisture contents, moisture sorption isotherms and sensory attributes (using a trained sensory panel) of the films were determined. Solubility was influenced primarily by the plasticizer in the films, and the higher the plasticizer content, the greater was the solubility of the films in water. Moisture contents of the films showed a strong relationship with moisture sorption isotherm properties of the films. Lower moisture content of the films resulted in lower equilibrium moisture contents at all aw levels. Sensory evaluation of the films revealed that no distinctive odor existed in WPI films. All films tested showed slight sweetness and adhesiveness. Films with lipids were scored as being opaque while films without lipids were scored to be clear. Whey protein/lipid emulsion edible films may be suitable for packaging of powder mix and should be suitable for packaging of non-hygroscopic foods$^{(5,6,7,8,)}$.

• Food Science of Animal Resources
• /
• v.29 no.4
• /
• pp.475-481
• /
• 2009

The effects of wheat fiber (WF) and isolated soy protein (ISP) on the physicochemical and sensory properties of frankfurter-type sausages were evaluated. The frankfurters were formulated with 2% WF (T1), 2% ISP (T2), and 1% WF plus 1% ISP (T3). The pH of all the samples ranged from 5.90 to 5.94 (p>0.05), and the CIE $L^{\ast}$ values of the WF and ISP treatments were higher than those of the control, but the CIEs of $a^{\ast}$ and $b^{\ast}$ were lower than those of the control (p<0.05). The cooking losses with the treatments were lower than the cooking loss with the control, but there were no significant differences among all the treatments. The treated frankfurters showed better emulsion stability than the control, and T1 had the greatest hardness, cohesiveness, and viscosity (p<0.05). All the frankfurters scored the same for sensory color (p>0.05), and the sensory properties of flavor, juiciness, and overall acceptability of T1 resulted in satisfactory sensory scores. The best results were conclusively obtained with the frankfurters that contained 2% WF. This study showed the potential of WF to be used in frankfurters as a substitute for ISP.

• Korean Journal of Food Science and Technology
• /
• v.48 no.4
• /
• pp.372-377
• /
• 2016

The quality characteristics of chicken thigh frankfurters prepared with various concentrations of red pepper seed powder (0, 0.5, 1.0, and 1.5%) were examined. With increasing levels of red pepper seed powder, moisture and ash contents of samples increased but protein contents significantly decreased (p<0.05). Moreover, the lightness of uncooked and cooked samples decreased with increasing concentrations of red pepper seed powder. Redness and yellowness values of uncooked and cooked samples containing 1.0% and 1.5% red pepper seed powder were significantly higher than those of control samples and samples containing 0.5% red pepper seed powder (p<0.05). The cooking yield and viscosity of the samples increased with increasing red pepper seed powder content. In conclusion, chicken thigh frankfurters containing 1.5% red pepper seed powder had better physicochemical properties than the other samples tested. Therefore, 1.5% red pepper seed powder is suitable additive for chicken thigh products.

• Food Science of Animal Resources
• /
• v.34 no.3
• /
• pp.378-386
• /
• 2014

This study was conducted to determine the effects of red and green glasswort on the physicochemical and textural properties of reduced-salt cooked sausages. The control was formulated with 1.5% NaCl; then, three reduced-salt treatments were prepared, with 0.75% NaCl (RS), 0.75% NaCl+1.0% red glasswort (RSR) and 0.75% NaCl+1.0% green glasswort (RSG), respectively. The addition of glasswort within the added amount of 1% had no influence on the pH value of the reduced-salt cooked sausages, regardless of the glasswort type. In terms of color, RSG treatment conveyed a higher hue angle value than the RSR treatment (p<0.05). Increases in the protein solubility (total and myofibrillar proteins) and apparent viscosity of reduced-salt meat batter that were due to the addition of glasswort were observed; however, there were no differences according to the type of glasswort (p>0.05). Furthermore, the addition of glasswort, regardless of its type, resulted in decreased cooking loss, and increased emulsion stability. As a result, reduced-salt cooked sausages formulated with either red or green glasswort demonstrated similar textural properties to those of the control. In conclusion, the type of glasswort within an added amount of 1% had no influence on the physicochemical and textural properties of reduced-salt cooked sausages, except for the color characteristics. In terms of color alteration by the addition of glasswort, the red glasswort, which in comparison with the green glasswort could minimize the color changes of reduced-salt cooked sausages, might be an effective source for manufacturing meat products.

• Journal of agriculture & life science
• /
• v.53 no.3
• /
• pp.41-49
• /
• 2019

Consumers are interested in natural ingredient that replace synthetic antioxidants in meat products. This study was carried out to investigate the effects of astaxanthin (AX) on the oxidative stability and quality characteristics of emulsified sausages during cold storage. Emulsified sausages were prepared as follows: manufactured without AX and BHT (Control), added with 500 mg/kg of BHT (BHT), and added with 80 mg/kg of AX (AX). Addition of AX showed no significant difference in pH, emulsion stability and cooking yield of emulsified sausages (p>0.05). However, the initial color retentivity was the same as that of synthetic antioxidant such as BHT treatment, and the redness was higher when AX treatment was added (p<0.05). The lipid oxidation showed the lowest value in the BHT treatment at the end of storage and the AX treatment also was significant lower than that of control (p<0.05). Hardness was lower in the all treatments at the end of storage than in the control (p<0.05). Therefore, astaxanthin can be used as a color enhancing agent for meat products as well as an natural antioxidant in replacing of BHT which is as synthetic antioxidant.