• Korean journal of food and cookery science
• /
• v.30 no.3
• /
• pp.262-270
• /
• 2014

This study was conducted in order to investigate the properties of bread making and quality improvement when wheat flour is replaced with whole waxy sorghum flour. Sorghum flour, which was prepared with two types of milling methods of pin mill and ultra fine pulverization, was used at different levels ranging from 10, 20 and 30%, respectively. The pasting properties of peak viscosity, setback viscosity and pasting temperature of the composite flour containing pin-milled sorghum flour were higher than those of ultra fine pulverized sorghum flour. The volumes of sorghum bread were lower than that of wheat bread; moreover, they gradually decreased with increasing amounts of sorghum flour, which has inferior dough properties and therefore collapses in the oven. The use of vital gluten (12% based on sorghum flour weight) and emulsifier (SSL; sodium stearoyl lactylate) increased the extensibility and resistance to the extension of the dough, thereby improving its rheological properties. Thus, the oven spring of bread containing sorghum was improved, demonstrating as loaf volume increase up to 15%. However, in the case of breads containing 30% sorghum flour, the loaf volumes were still unacceptably low. Therefore, the formula and the bread making process were further modified as follows: An increase of vital gluten ($12%{\rightarrow}18%$) and shortening ($3%{\rightarrow}6%$), a decrease of mixing time and dough fermentation temperature, and the addition of sorghum flour after gluten development during mixing. The above modifications resulted in the improvement of sorghum bread quality. Therefore, we suggest that pin-milled sorghum flour is more appropriate than ultra fine pulverized sorghum flour for making bread.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.348-352
• /
• 1995

The antioxidant activities and properties of freeze-dried(FD) coffee were examined. Aqueous solution of FD coffee showed antioxidant activity on lard, and the antioxidant effect increased with increasing the addition of the aqueous solution. In contrast, FD coffee powder did not showed antioxidant activity on lard. The antioxidant activities of aqueous FD coffee solution of different solid contents were closely correlated with the water activity(Aw). Aqueous FD coffee solution with high Aw(over 0.98) showed strong antioxidant activity. Emulsifiers added to lard did not change the antioxidant activities of aqueous FD coffee solution. The lard that aqueous FD coffee solution was removed from by centrifuging had an antioxidant activity as the lard with aqueous FD coffee solution did. The spectrophotometry test showed that unidentified nonpolar components of FD coffee were introduced into lard.

• Journal of the Korean Applied Science and Technology
• /
• v.12 no.1
• /
• pp.101-107
• /
• 1995

As the surfactants that were used in micellar reaction, emulsion polymerization and phase-transfer reaction etc. have the problems, the cleavable surfactant was converted to inactive compound after such as the reaction in the condition. Because 1, 3-dioxolane ring by ketal or acetal reactioc is lack of stability in acid condition, it is easily made to acid-hydrolysis. And cmc value of the surfactant is assumed $1.0{\times}10^{-5}mol/L$ and surface tension in cmc is 31 dyne/cm. Compared with other surfactant, this surfactant foam property is not better. But emulsion property was relatively good. According as acid-hydrolysis property was observed the interface tension change between aqueous solution and benzene by the variation of pH and time, this surfactant was made to hydrolysis within about 300minutes in pH 1${\sims}$4. Therefore this surfactant is expected to be a good emulsifier that has the bad foam property and the acid-hydrolysis property in acid condition.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.155-167
• /
• 2016

Surface-active substances in defatted rapeseed cake were obtained using a supercritical fluid extraction method. Then, it was purified by removing sinapine in the extract through a series of steps using a mixed solvent: diethyl ether and ethyl acetate (1:1, v/v). Emulsifying properties of purified surface-active substances were investigated, including fat globule size, zeta potentials and creaming stability and its antioxidant activity in emulsion systems were also studied by peroxide value and $^1H$-NMR spectrum. It was found that fat globules in emulsions with purified surface-active substances were much smaller than ones with the unpurified. In addition, as pH of the emulsion lowered and with increasing NaCl concentration in the emulsion, they were observed to increase, which led to worse creaming stability. These properties were reflected in changes of zeta potentials of emulsions. The oxidative stability was better in emulsions with purified surface-active substances than ones with Tween 20 or commercial lecithin, possibly resulted from the existence of sinapic acid in the extract. It was concluded that purified surface-active substances from defatted rapeseed cake could be simultaneously used as emulsifier and antioxidant agent in emulsion system.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.19 no.6
• /
• pp.612-616
• /
• 1990

The addition of water into oil phase containing hydrophobic emulsifier while stirring forms W/O emulsions. When dispersed phase increase up to a certain extent, phase inversion into O/W emulsions occurs and just before phase inversion O/W/O emulsions exist in a mixed state with W/O emulsions. Thus this experiment was carried out to examine O/W/O emulsions formation in W/O emulsions. The viscosity of sample emulsions(water phase： $H_2O$, oil phase : TGCR-containing olive oil) was measured at the shear rate of 1.92 to 384 per second and at temperature of 25$\pm$0.1$^{\circ}C$, and the development of O/W/O emulsions evaluated from the difference between theoretical and measured values by substituting measured value for Mooney's equation. The formation of O/W/O emulsions tended to be high in sample emulsions just before phase inversion and increase with decreasing TGCR concentrations. This result suggests that high viscosity observed right before phase inversion may also be caused by the formation of O/W/O emulsions.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.29 no.2 s.43
• /
• pp.181-191
• /
• 2003

This study described about method that form liquid crystal gel (LCG) by main ingredient with hydrogenated lechin (HL) in OW emulsion system. Result of stability test is as following with most suitable LCG's composition. Composition of LCG is as following. To form liquid crystal, an emulsifier used $4.0\;wt\%$ of cetostearyl alcohol (CA) by $4.0\;wt\%$ of HL as a booster, Moisturizers contained $2\;wt\%$ of glycerin and $3.0\;wt\%$ of 1.3-butylene glycol (1,3-BG). Suitable emollients used $3.0\;wt\%$ of cyclomethicone, $3.0\;wt\%$ of isononyl isononanoate (ININ), $3.0\;wt\%$ of cerpric/carprylic triglycerides (CCTG), $3.0\;wt\%$ of macademia nut oil (MNO) in liquid crystal gel formation. On optimum conditions of LCG formation, the pHs were formed all well under acidity or alkalinity conditions. Considering safety of skin, PH was the most suitable $\pm61.0$ ranges. The stable hardness of LCG formation appeared best in $32\;dyne/cm^2.$ Particle of LCG is forming size of $1{\~}20\;{\mu}m$ um range, and confirmed that the most excellent LCG is formed in $1{\~}6\;{\mu}m$ range. According to result that observe shape of LCG with optical or polarization microscope, LCG could was formed, and confirmed that is forming multi-layer lamellar type structure around the LCG. Moisturizing effect measured clinical test about 20 volunteers. As a result, moisturizing effect of LCG compares to placebo cream was increased $30.6\%$. This could predicted that polyol group is appeared the actual state because is adsorbed much to round liquid crystal droplets to multi-lamellar layer's hydrophilic group. It could predicted that polyol group is vast quantity present phase that appear mixed because is adsorbed to round liquid crystal to multi-lamellar layer's hydrophilic group. This LCG formation theory may contribute greatly in cosmetics and pharmacy industry development.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.2
• /
• pp.252-258
• /
• 1998

The strain producing biosurfactant was isolated from soil smples. The isolated strain was identified as the genus Nocardia through its morphological, cultural and physiolgical characteristics. A high concentration of the biosurfactant by Nocardia sp. L-417 was obtained after 4 days of cultivation in the culture medium containing 3% n-hexadecane, 0.1% $NaNO_3$, 0.02% $K_2HOP_4$, 0.01% $H_2PO_4$, 0.01% $MgSO_4$.$7H_2O$, 0.01% $CaCl_2$, 0.02% yeast extract, and 0.02% tryptone. The optimum pH and temperature for biosurfactant production were pH 6.0 and $30^{\circ}C$, respectively. Furthermore, most biosurfactans were produced during the exponential growth phase, and this fact indicated that the biosurfactans production was growth-associated. The biosurfactant showed the good emulsification activities on various emulsifying substrates such as bunker A, paraffin, corn oil which are used widely in industries.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.10
• /
• pp.1434-1438
• /
• 2006

The purpose of this study was to make soy milk without using any food additives. First, it was attempted to find the effects of homogenizing pressure on the emulsion stability of soy milk without addition of monoglyceride. The soy milk was made with the ratio of bean and water as 1:8, and the yields of soy milk was measured to be 5.87 fold of the beans used. lifter making soy milk by differentiated pressure of the homogenizer at $50kg/cm^2,\;100kg/cm^2,\;150kg/cm^2\;and\;200kg/cm^2$, general composition of the center part of soy milk was analysed. The analysis results indicated that the lipid content increased by the increase of the emulsion pressure. Moreover, the suspension stability, emulsion stability and viscosity also increased by the increase of the emulsion pressure. Therefore, we thought that the production of soy milk without adding any emulsifier was possible only by homogenizing at higher pressure over $150kg/cm^2$.

• Korean Chemical Engineering Research
• /
• v.45 no.6
• /
• pp.611-618
• /
• 2007

We demonstrate the sol-gel coating technique of colloidal clusters for producing hollow micro-particles with complex morphologies. Cross-linked amidine polystyrene (PS) microspheres were synthesized by emulsifier-free emulsion copolymerization of styrene and divinylbenzene. The amidine PS particles were self-organized inside toluene-in-water emulsion droplets to produce large quantities of colloidally stable clusters. These clusters were coated with thin silica shell by sol-gel reaction of tetraethylorthosilicate (TEOS) and ammonia, and the organic polystyrene cores were removed by calcination at high temperature to generate nonspherical hollow micro-particles with complex morphologies. This process can be used to prepare hollow particles with shapes such as doublets, tetrahedra, icosahedra, and others.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.3
• /
• pp.225-231
• /
• 2013

Oil in water nanoemulsion of astaxanthin was prepared by high pressure homogenization. The emulsifying conditions including emulsifier type, concentration and astaxanthin concentration were optimized. Stability of nanoemulsion was measured using zetasizer, freeze-fracture scanning electron microscope (FF-SEM), particle analyzer and colorimeter. The mean diameter of the dispersed particles containing astaxanthin ranged from 160 to 190 nm. Size distribution was unimodal and extended from 40 to 200 nm. The nanoemulsion prepared by glyceryl citrate/lactate/linoleate/oleate had smaller particle size and narrow size distribution. Stable incorporation of astaxanthin in nanoemulsion was performed and checked using high performance liquid chromatography (HPLC), freeze-fracture scanning electron microscope (FF-SEM). Physical stability of nanoemulsion was not significantly changed during storage at both light and thermal condition for a month with zeta potential value of -41 mV meaning stable colloid.