• 한국분무공학회지
• /
• 제10권3호
• /
• pp.9-16
• /
• 2005

To investigate spray and combustion of emulsified fuel of W/O type, we mixed water with light oil by using ultrasonic energy adding system. We measured the SMD of sprayed droplet to find atomization characteristics of emulsified fuel with using the Malvern 2600D system. Major parameters are the weight ratio of water($0{\sim}30%$ by 10%) in emulsified fuel injection pressure(lobar), and the measurement distance($10{\sim}100mm$ by 10mm). Combustion visualizing system is made up commonly used boiler system and digital camera 1/500s to investigate combustion phenomena. As a result, the more water contents increased, the more SMD increased. The water particle of emulsified fuel made short flame in continuos spray combustion phenomena because of micro explosion.

• Journal of Advanced Marine Engineering and Technology
• /
• 제7권2호
• /
• pp.15-21
• /
• 1983

Preparing for treatment and management of the emulsified fuel oil which will be generalized henceforth, this paper is an attempt to examine the viscosity-temperature characteristics of emulsified heavy fuel oil which is mixed with water and emulsifier in various mixture ratio by mechanical mixer. The experimental results are summarized as follows: 1. The viscosity-temperature characteristics of the emulsified C & B grade heavy fuel oil mixed with water of same or less weight, is changed according to log.log(v+0.6)=b-3.8log T. 2. The emulsifier has to be added to the emulsified A grade heavy fuel oil mixed with water of same or less weight, because it is instable. Especially if the emulsifier is sodium stearate, it is added more than 0.3% of the weight of oil and water. 3. In the emulsified A grade heavy fuel oil mixed with water and emulsifier, the higher the ratio of water addition becomes, the higher the viscosity is and the more the viscosity-temperature slope decreases. But the higher the ratio of emulsifier addition is, the more the viscosity-temperature slope increases. In this case, the linearity of viscosity-temperature characteristic curve is poorer than that of B and C grade heavy fuel oil. 4. In the emulsified A grade heavy fuel oil mixed with emulsifier of 0.3% or less, the emulsion type is O/W type when water addition ratio is 40%, but it is W/O type when it is 10%, 20%, 30% and 50%.

• 한국응용과학기술학회지
• /
• 제31권3호
• /
• pp.492-499
• /
• 2014

The objectives of this study was to examine experimentally the microexplosion phenomena of single droplet W/O(water-in-oil) type emulsified fuel. Also, measured the combustion characteristics of single droplet emulsified fuel for microexplosion phenomena in atmospheric pressure condition. The larger quantity of adding water makes microexplosion phenomenon with higher intensity of sound level, because larger water droplet has better coalescence for emulsified fuel. The small quantity of adding water makes puffing with lower sound level intensity. In latter period of extinction, large size droplet of the emulsified fuel breaks down rapidly to small size droplet, and microexplosion phenomenon occurs with multi step combustion.

• Journal of Mechanical Science and Technology
• /
• 제18권11호
• /
• pp.2049-2057
• /
• 2004

In this study, the combustion characteristics and durability of a diesel engine using emulsified fuel was investigated. Water was used in oil type emulsified fuel. In order to understand the effect of emulsified fuel in a wide range of engine running conditions, D-13 mode was selected as a test condition, and a durability test was included to understand the long-term effect of water. Combustion pressure in a cylinder, exhaust emissions, specific fuel consumption, sound level and maximum torque were measured. NOx and PM were simultaneously reduced and the specific fuel consumption was increased and decreased at low and high loads, respectively. There was no trouble and any damage on the parts of the cylinder during a 500 hour durability test.

• 대한기계학회논문집A
• /
• 제39권9호
• /
• pp.909-916
• /
• 2015

본 연구는 디젤-과산화수소 에멀젼연료의 충돌분무를 대상으로 과산화수소의 혼합비가 증발분무 거동특성에 미치는 영향을 조사하였다. 에멀젼연료의 증발을 위해 온도조절이 가능한 가열판을 사용하여 온도를 $150^{\circ}C$, $200^{\circ}C$ 및 $250^{\circ}C$로 각각 설정하였고, 연료 분사압력을 400bar, 600bar, 800bar 및 1000bar로 설정하여 분사압력이 에멀젼연료의 증발특성에 미치는 영향을 확인하였다. 에멀젼연료의 혼합을 위 한 계면활성제로 span80과 tween80을 9:1의 비율로 혼합하여 에멀젼연료 전체 체적의 3%로 고정하였고 과산화수소의 혼합비율을 EF(Emulsified Fuel)0, EF2, EF12 및 EF22로 설정하여 디젤연료와 혼합하였다. 또한 에멀젼연료 증발 충돌분무의 가시화를 위해 슐리렌방법을 적용하였다. 본 연구의 결과로서 충돌하는 가열판의 온도와 분사압력이 높을수록 에멀젼연료 증발 촉진으로 연료 기상의 확산이 활발해지는 것을 알 수 있었다. 이러한 결과로부터 실제엔진에 에멀젼연료를 사용할 경우 연료 내 과산화수소 증발에 의한 연소실 온도 저하효과와 함께 보다 신속한 혼합기 형성은 엔진배출물의 감소를 일으키는 것으로 기대된다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.105-110
• /
• 1999

The elementary experiment was performed to develop the emulsified fuel production system using pressure injection nozzle in this study. The stabilities and characteristics of emulsified fuel which is produced through direct spray of water via pressure injection nozzle into oil are examined. To understand performance of emulsion production, stabilities of emulsified fuel which is made by adding water to the mixed fuel of Bunker-C and 10 $^{\sim}$ 50 vol% of heating oil were investigated. According to volume ratios of surfactant in heating oil the stability and SMDs were measured

• 대한기계학회논문집B
• /
• 제29권11호
• /
• pp.1248-1256
• /
• 2005

This study was undertaken to investigate the flow characteristics of emulsified fuel with the ultrasonic energy-adding system by using the chaotic method. Efffcts of water contents within emulsified fuel, flow rate and tube length with 5m in diameter from an emulsified chamber has been discussed on the strange attractor and power spectral density function. Five probe sensors were set up from 0.5 to 2.5m by length in 0.5m increments in the tube. In particular, the chaotic features of this system have been practically characterized in terms of chaotic statistics such as the power spectral density function and phase space portraits by resorting to the somewhat noble deterministic chaos theory. In the tube, the dominant frequency increased with increasing water contents and flow rate, but decreased a little with an increase in the length from the emulsified chamber.

• 대한기계학회논문집B
• /
• 제38권9호
• /
• pp.763-771
• /
• 2014

본 연구는 에멀젼연료($diesel/H_2O_2$)의 분무거동특성에 관한 기초 연구로서 에멀젼연료를 제조하여 분무 거동특성에 영향을 주는 연료의 물성치(점도, 표면장력, 밀도)와 연료액적 증발특성을 조사하였다. 또한 에멀젼연료와 디젤연료의 거시적 분무거동특성인 분무선단도달거리, 분무각을 비교 분석하였다. 에멀젼연료의 교반 조건은 디젤 연료와 계면활성제 span 80, tween 80을 각각 9:1로 혼합한 유화제를 제작하여 사용 하였으며 과산화수소의 혼합비율은[EF(Emulsified Fuel)2, EF12, EF22, EF32, EF42, EF52, EF62, EF72, EF82, EF92]로 설정하였고, 분사압력은 400bar, 600bar, 800bar 및 1000bar로 설정하였다. 본 연구의 결과로서 연료의 점도는 과산화수소의 혼합비율이 증가할수록(EF52까지) 점도가 증가하나, 그 이후부터는 점도가 낮아져 기존의 디젤연료와 같은 점도를 가지게 된다. 이는 디젤의 혼합비율이 큰 EF52까지는 교반 시 수중유형(Water in Oil)이 생성되나 과산화수소의 혼합비율이 큰(EF52 이상) 에멀젼연료에서는 유중수형(Oil in Water)이 생성되기 때문이다. 또한 혼합비 변화에 따른 분무거동의 특성(분무선단도달거리, 분무각)의 변화는 크지 않았다.

• 분석과학
• /
• 제21권3호
• /
• pp.159-166
• /
• 2008

본 연구에서는 water/oil 유화연료를 제조하여 제조된 연료의 점도, 밀도, 최적의 조사시간, 유화 안정성 등의 유화연료 특성 및 배기배출물 특성인 NOx, THC, CO의 농도와 smoke density를 측정하였다. 유화연료는 경유, 물, 유화제를 첨가한 후 homogenizer와 초음파 발생장치를 일정시간 조사하여 제조하였고, 배출가스 시험은 2476 cc diesel engine을 사용하여 engine dinamo meter로 실험하였다. 유화연료에서 함수율이 증가할수록 밀도가 증가하였으며, 점도는 함수율 60%까지는 W/O type이 형성되어 증가하다가 70%에서는 O/W type이 형성되어 감소하였다. 배출가스 시험결과 함수율이 증가할수록 NOx 농도와 smoke density는 감소하고, THC와 CO 농도는 증가하였다. 출력감소 시험 결과 함수율이 증가할수록 배출온도와 출력이 감소하였다. 위의 결과로부터 압축착화 디젤기관에 유화연료를 사용하는 것은 NOx와 smoke를 제거하는 효과적인 방법이라고 사료되어진다.

• 한국자동차공학회논문집
• /
• 제18권4호
• /
• pp.62-67
• /
• 2010

The objective of this experimental study is to verify atomization characteristics of emulsified fuel. The emulsified fuel made of adding the ultrasonic energy is analyzed with atomization characteristics and chemicophysics. As water contents within emulsified fuel and needle angle increase, SMD, viscosity and surface tension were analyzed. By measuring the distribution percentage of hydrogen volume by $^1H$-NMR spectrum, the proportion of aromatics and paraffins is analyzed and compared each other. The results of study is as follows. First, as water contents within emulsified fuel and needle angle of nozzle increases, SMD increases. Second, for the distribution percentage of hydrogen volume, the distribution percentage of aromatics is about 10% and the rest portion is paraffins.