• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.4
• /
• pp.17-22
• /
• 2010

In this study, a tsunami hazard curve was determined for a probabilistic safety assessment (PSA) of a tsunami event at a Nuclear Power Plant site. A Tsunami catalogue was developed by using the historical tsunami record prior to 1900 and the instrumental tsunami record after 1900. For the evaluation of the return period of the tsunami run-up height, power-law, upper-truncated power law and exponential function were considered for the assessment of regression curves and each result was compared. Although there were in total only 9 tsunami records on the east coast of Korea during the time period of the tsunami catalogue, there is no research like this about tsunami hazard curve evaluation, so this research lays a foundation for probabilistic tsunami hazard assessment (PTHA)

• Wind and Structures
• /
• v.19 no.5
• /
• pp.505-522
• /
• 2014

While effects of the atmospheric boundary layer flow on engineering infrastructure are more or less known, some local transient winds create difficulties for structures, traffic and human activities. Hence, further research is required to fully elucidate flow characteristics of some of those very unique local winds. In this study, important characteristics of observed vertical velocity profiles along the main wind direction for the gusty Bora wind blowing along the eastern Adriatic coast are presented. Commonly used empirical power-law and the logarithmic-law profiles are compared against unique 3-level high-frequency Bora measurements. The experimental data agree well with the power-law and logarithmic-law approximations. An interesting feature observed is a decrease in the power-law exponent and aerodynamic surface roughness length, and an increase in friction velocity with increasing Bora wind velocity. This indicates an urban-like velocity profile for smaller wind velocities and rural-like velocity profile for larger wind velocities, which is due to a stronger increase in absolute velocity at each of the heights observed as compared to the respective velocity gradient (difference in average velocity among two different heights). The trends observed are similar during both the day and night. The thermal stratification is near neutral due to a strong mechanical mixing. The differences in aerodynamic surface roughness length are negligible for different time averaging periods when using the median. For the friction velocity, the arithmetic mean proved to be independent of the time record length, while for the power-law exponent both the arithmetic mean and the median are not influenced by the time averaging period. Another issue is a large difference in aerodynamic surface roughness length when calculating using the arithmetic mean and the median. This indicates that the more robust median is a more suitable parameter to determine the aerodynamic surface roughness length than the arithmetic mean value. Variations in velocity profiles at the same site during different wind periods are interesting because, in the engineering community, it has been commonly accepted that the aerodynamic characteristics at a particular site remain the same during various wind regimes.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.4
• /
• pp.317-321
• /
• 2015

Many kinds of generation systems have been developed to use ocean energy. Among these, with the use of an oscillating water column (OWC) for power generation is attracting attention. The OWC-type wave power generation system converts wave energy into electricity by operating a generator turbine with the oscillating water level in a column of water. There are two ways to convert wave power into electricity using an OWC. One uses a cross-flow turbine using the water level inside the OWC. The other method uses the flow of air in a Wells turbine, which depends on the water level. An experiment was carried out using a 2-D wave tank in order to minimize the number of empirical tests. The design factors were taken from Koo et al. (2012) and the experimental environment assumed by free surface motion. This paper deals with characteristics of two types of wave energy conversion systems combine with a breakwater. One model uses an air-driven Wells turbine and a cross-flow water turbine. The other type uses a cross-flow water turbine. Wave energy converters with OWCs have mostly been studied using air-driven Wells turbines. The efficiency of the cross-flow turbine was about 15% higher than that of the other model, and the water level of the OWC internal chamber for the cross-flow water turbine and air-driven Wells turbine was less than about 40% lower than the one using only the cross-flow water turbine.

• 한국벤처창업학회:학술대회논문집
• /
• 2006.11a
• /
• pp.415-443
• /
• 2006

This empirical study focused on examining the relationship between transactional transformational leadership style and power of construction project manager and the organizational effectiveness, respectively, and the moderating role of power between leadership and the organizational effectiveness. A 790 numbers useful questionnaires were obtained from the stuffs working at the construction sites excluding project managers. Internal consistency test using Cronbach's ${\alpha}$ and confirmatory factor analysis were conducted for the reliability and validity of the scales respectively. And cluster analysis and multivariate analysis of variance (MANOVA) were conducted to test the hypotheses. The results and implications are as follows. First, the leadership styles of project managers influence positively the subordinates' job satisfaction but not organizational commitment in construction project. Second, the power styles of project managers influence positively the subordinates' job satisfaction and organizational commitment. Third, the leadership styles of the project managers influence positively the subordinates' job satisfaction and organizational commitment by the power moderating role. The implication of this result is important because of the fact that the transformational leadership can be useful even in the construction projects. And the moderating role of the project manage's power suggests.

• Journal of Environmental Science International
• /
• v.19 no.7
• /
• pp.889-900
• /
• 2010

The experimental design and response surface methodology (RSM) have been applied to the investigation of the electro-UV complex process for the disinfection of E. coli in the water. The disinfection reactions of electro-UV process were mathematically described as a function of parameters power ($X_1$), NaCl dosage ($X_2$), initial pH ($X_3$) and disinfection time ($X_4$) being modeled by use of the Box-Behnken technique. The application of RSM using the Box-Behnken technique yielded the following regression equation, which is an empirical relationship between the residual E. coli number and test variables in actual variables: Ln (CFU) = 23.57 - 0.87 power - 1.87 NaCl dosage - 2.13 pH - 2.84 time - 0.09 power time - 0.07 NaCl dosage pH + 0.14 pH time + 0.03 $power^2$ + 0.47 NaCl $dosage^2$ + 0.20 $pH^2$+ 0.33 $time^2$. The model predictions agreed well with the experimentally observed result ($R^2$ = 0.9987). Graphical response surface and contour plots were used to locate the optimum point. The estimated ridge of maximum response and optimal conditions for the E. coli disinfection using canonical analysis was Ln 1.06 CFU (power, 15.40 W; NaCl dosage, 1.95 g/L, pH, 5.94 and time, 4.67 min). To confirm this optimum condition, the obtained number of the residual E. coli after three additional experiments were Ln 1.05, 1.10 and Ln 1.12. These values were within range of 0.62 (95% PI low)~1.50 (95% PI high), which indicated that conforming the reproducibility of the model.

• Journal of Korea Water Resources Association
• /
• v.48 no.12
• /
• pp.981-993
• /
• 2015

The analysis of hydrologic time series data is crucial for the effective management of water resources. Therefore, it has been widely used for the long-term forecasting of hydrologic variables. In tradition, time series analysis has been used to predict a time series without considering exogenous variables. However, many studies using decomposition have been widely carried out with the assumption that one data series could be mixed with several frequent factors. In this study, the empirical mode decomposition method was performed for decomposing a hydrologic time series data into several components, and each component was applied to the time series models, autoregressive moving average (ARMA). After constructing the time series models, the forecasting values are added to compare the results with traditional time series model. Finally, the forecasted estimates from ARMA model with empirical mode decomposition method showed better performance than sole traditional ARMA model indicated from comparing the root mean square errors of the two methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2045-2053
• /
• 2012

The primary purpose of this paper is to identify the cognition of the convergence human resource for firms. For this purpose, Data have been collected from 110 firms in Daejeon city and studied the convergence human resource which recognized by firms on the company competitive power level. The results of this empirical studies are summarized as fellows. We classified in company competitive power as leading chaser, innovators and late chaser. In the talent, leading chasers demanded the total designer, problem solver and insighter, innovators demanded the total designer, problem solver and specialist, and late chasers demanded the traditional humanity. In technology management, all group think important fields. In the demanding forecasting for the market and technologies, leading chasers and innovators demanded the CEO, R&D researcher and a middle manager as the important position. For this education, they demanded the convergence ability of other technologies, the up-to-date abilities of product and technology and the understandings of market needs. In the convergence talent or leader, leader chaser and innovator demanded the specialist who attempted to combine others industries, who know well in technology and management, and the specialist who attempted to combine others technologies. But, late chaser demanded the specialist who attempted to combine others industries.

• International Area Studies Review
• /
• v.15 no.3
• /
• pp.239-261
• /
• 2011

The cyclicality of productivity has been one of the essential issues in macroeconomics. Since Solow(1957) developed the dominant approach to the measurement of productivity growth, Solow's approach, which assumes the perfect competition, the constant returns to scale, and the full use of input factor has been modified particularly in Hall's(1990) and Basu's(1996) works. Their researches take account of market power, returns to scale, and variable factor utilization. This paper establishes the empirical model based on Hall's(1990) and Basu's(1996) models, estimates 4 types of Solow's reidual in manufacturing and 2 service industries over the period 1975:1-2010:4, and analyzes the cyclicality of measured productivity. The result proved the measured productivity to be procyclical in manufacturing industries and electricity and water industry, and in contrast to the Basu's, the variable factor utilization transformed the countercyclicality of measured productivity into its procyclicality in the Korean economy.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.4
• /
• pp.135-140
• /
• 2024

It is said that PV power generation systems have a long lifespan compared to other renewable energy sources and require little maintenance. However, there are cases where the performance expected during initial design is not achieved due to shading, temperature rise, mismatch, contamination/deterioration of PV modules, failure of inverter, leakage current, and arc generation. Therefore, in order to solve the problems of these systems, the power generation amount and operation status are investigated qualitatively, or the performance is comparatively analyzed based on the performance ratio (PR), which is the performance index of the solar power generation system. However, because it includes large losses, it is difficult to accurately determine whether there are any abnormalities such as performance degradation, failure, or defects in the PV power generation system using only the performance coefficient. In this paper, we studied a status diagnosis algorithm for shading, inverter failure, leakage, and arcing of PV modules to optimize the power generation of PV power generation systems according to changes in the surrounding environment. In addition, using the studied algorithm, we examined the results of an empirical test on condition diagnosis for each area and the resulting optimized operation of power generation.

• Journal of Energy Engineering
• /
• v.11 no.1
• /
• pp.67-73
• /
• 2002

The carbon-in-ash system for simultaneously monitoring the unburned carbon in fly ash produced in a coal-fired power plan is designed and evaluated using the domestic fly ash produced in the coal-fired power plant. Real time monitoring is very important to control the combustion of the boiler in the coal-fired power plant and the purification system for fly ash recycling. The carbon-in-ash system based on the capacitance measurement consists of a LCR meter, a duct collector and an electrode cell. The capacitance of fly ash increases linearly with increasing fly ash carbon contents. The water content in fly ash plays an important role on the ash capacitance. The empirical equation for predicting the content of unburned carbon in fly ash produced in the domestic Boryung, Hadong and Samchenpo coal-fired power plants can be derived in the range of carbon content 0-20%.