• 제목/요약/키워드: Empirical formular

검색결과 15건 처리시간 0.023초

발파진동 제어에 의한 특수구간 터널굴착에 관한 연구 (A Study on Tunnel Excavation by Controlled Blast Vibration at Particular Environment Conditions)

  • 최형빈;임한욱
    • 산업기술연구
    • /
    • 제20권A호
    • /
    • pp.257-267
    • /
    • 2000
  • It was difficult to apply conventional excavation methods in some sections from Seoul to Pusan high speed rail road construction of 1 lot 2, due to highway concrete road, gas pipe, water pipe and nearby factories with automatic control system machine. To excavate safely and efficiently in these sections new blast patterns were employed within allowable blast vibration level, by test blast and controlled vibration by sequential blast. Behaviors of the rock mass including convergence and displacement around tunnel were measured with construction works and the crack width in concrete wall was also monitored for controlling allowable limits. The results can be summarized as follow : 1. The allowable blast vibration level in structure site is less 1.0cm/sec for highway concrete, 0.5 cm/sec for gas pipe, water pipe and building housing and 0.3 cm/sec for automatic control system machine. 2. The convergence displacement, single rod extensometer and multi rod extensometer around tunnel and cracks in concrete wall were measured, it was confirmed that the measured values were converged within allowable level. 3. The empirical formular of ground vibrations with 90% confidence lines for PD-3 was given as follow. $$V_{90%}=45.549({\frac{D}{\sqrt{W}}})^{-1.353}$$

  • PDF

Preperation and Struction of a 3-Dimensional Nickel(II) Coordination Polymer

  • 한원석;이순원
    • 한국결정학회:학술대회논문집
    • /
    • 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
    • /
    • pp.28-28
    • /
    • 2002
  • The hydrothermal reaction of Ni(NO₃)·6H₂O with 4.4'-oxybis(benzoic acid) (OBCH₂) and trans-1,2-bis(4-pyridyl)ethylene (bipyen) led to the formation of a 3-dimensional coordination polymer with the empirical formular of [Ni(OBC)(bipyen)]·H₂O. The complex has been characterized by X-ray diffraction, elemental analysis, TGA, IR, X-ray power diffraction (XRPD), It crystallized triclinic space group P1 with a = 9.280(2)Å., b = 11.317(4) Å, c = 12.442(3) Å, Z = 2, R (ωR₂) = 0.0346 (0.0846).

  • PDF

물질을 투과한 고에너지 전자선의 선량변화 (Studies on the Interaction of High Energy Electron with Various Matters)

  • 추성실;김귀언;박창윤
    • Radiation Oncology Journal
    • /
    • 제1권1호
    • /
    • pp.11-19
    • /
    • 1983
  • Interaction between high energyelectrons and matters had many complex reactions and the high energy electrons lost their energies with collision and scattering, therefore, electrons distribution in matters was shown as various situation by scattering, exciting and ionizing with moleculars. We experimentally studies with 13 MeV Linear Accelerator and thermoluminescence dosimeter using aluminium and Teflon, etc., and measured energy loss of electrons, electron range, electron scattering and dose distribution in matter. We compared the results with theoretical formular, between 4-qw MeV, the energy loss of electrons was decreased by 2 MeV per $1g/cm^2$ but under 1MeV it was rapidly decreased. Electron range in matter reached to $0.5/cm^2$ per 1MeV of incident energy at 6-12MeV. The dose distribution in matter was increased slightly to some depth by total distribution i.e., the combined intensity of primary and secondary radiant and it was rapidly decreased near the maximum range of electrons. Energy loss of electrons and electron range measured by experiment were coincided with theoretical equations of L. Landau and Feather under 5 and 3% errors respectively. The dose distribution of electrons in matter was similar to L.V. Spencer formular, however, we had found that it was quite different in accordance with the field size and that new formular of dose distribution was induced as empirical function contained experimental factors according to field size.

  • PDF

배수개선공법개발에 관한 연구(I) -각종 지하배수용 암거재료의 배수성능- (Drainage Performance of Various Subsurface Drain Materials-)

  • 김철회;이근후;유시조;서원명
    • 한국농공학회지
    • /
    • 제21권3호
    • /
    • pp.104-120
    • /
    • 1979
  • I. Title of the Study Studies on the Development of Improved Subsurface Drainage Methods. -Drainage Performance of Various Subsurface Drain Materials- II. Object of the Study Studies were carried out to select the drain material having the highest performance of drainage; And to develop the water budget model which is necessary for the planning of the drainage project and the establishment of water management standards in the water-logged paddy field. III. Content and Scope of the Study 1. The experiment was carried out in the laboratory by using a sand tank model. The drainage performance of various drain materials was compared evaluated. 2. A water budget model was established. Various parameters necessary for the model were investigated by analyzing existing data and measured data from the experimental field. The adaptability of the model was evaluated by comparing the estimated values to the field data. IV. Results and Recommendations 1. A corrugated tube enveloped with gravel or mat showed the highest drainage performance among the eight materials submmitted for the experiment. 2. The drainage performance of the long cement tile(50 cm long) was higher than that of the short cement tile(25 cm long). 3. Rice bran was superior to gravel in its' drain performance. 4. No difference was shown between a grave envelope and a P.V.C. wool mat in their performance of drainage. Continues investigation is needed to clarify the envelope performance. 5. All the results described above were obtained from the laboratory tests. A field test is recommended to confirm the results obtained. 6. As a water balance model of a given soil profile, the soil moisture depletion D, could be represented as follows; $$D=\Sigma\limit_{t=1}^{n}(Et-R_{\ell}-I+W_d)..........(17)$$ 7. Among the various empirical formulae for potential evapotranspiration, Penman's formular was best fit to the data observed with the evaporation pans in Jinju area. High degree of positive correlation between Penman;s predicted data and observed data was confirmed. The regression equation was Y=1.4X-22.86, where Y represents evaporation rate from small pan, in mm/100 days, and X represents potential evapotranspiration rate estimated by Penman's formular. The coefficient of correlation was r=0.94.** 8. To estimate evapotranspiration in the field, the consumptive use coefficient, Kc, was introduced. Kc was defined by the function of the characteristics of the crop soil as follows; $Kc=Kco{\cdot}Ka+Ks..........(20)$ where, Kco, Ka ans Ks represents the crop coefficient, the soil moisture coefficient, and the correction coefficient, respectively. The value of Kco and Ka was obtained from the Fig.16 and the Fig.17, respectively. And, if $Kco{\cdot}Ka{\geq}1.0,$ then Ks=0, otherwise, Ks value was estimated by using the relation; $Ks=1-Kco{\cdot}Ka$. 9. Into type formular, $r_t=\frac{R_{24}}{24}(\frac{b}{\sqrt{t}+a})$, was the best fit one to estimate the probable rainfall intensity when daily rainfall and rainfall durations are given as input data, The coefficient a and b are shown on the Table 16. 10. Japanese type formular, $I_t=\frac{b}{\sqrt{t}+a}$, was the best fit one to estimate the probable rainfall intensity when the rainfall duration only was given. The coefficient a and b are shown on the Table 17. 11. Effective rainfall, Re, was estimated by using following relationships; Re=D, if $R-D\geq}0$, otherwise, Re=R. 12. The difference of rainfall amount from soil moisture depletion was considered as the amount of drainage required. In this case, when Wd=O, Equation 24 was used, otherwise two to three days of lag time was considered and correction was made by use of storage coefficient. 13. To evaluate the model, measured data and estimated data was compared, and relative error was computed. 5.5 percent The relative error was 5.5 percent. 14. By considering the water budget in Jinju area, it was shown that the evaporation amount was greater than the rainfall during period of October to March in next year. This was the behind reasonning that the improvement of surface drainage system is needed in Jinju area.

  • PDF

적용 기법에 따른 강우침식인자 산정 결과의 시공간적 불확실성 (Spatiotemporal Uncertainty of Rainfall Erosivity Factor Estimated Using Different Methodologies)

  • 황세운;김동현;신상민;유승환
    • 한국농공학회논문집
    • /
    • 제58권6호
    • /
    • pp.55-69
    • /
    • 2016
  • RUSLE (Revised Universal Soil Loss Equation) is the empirical formular widely used to estimate rates of soil erosion caused by rainfall and associated overland flow. Among the factors considered in RUSLE, rainfall erosivity factor (R factor) is the major one derived by rainfall intensity and characteristics of rainfall event. There has been developed various methods to estimate R factor, such as energy based methods considering physical schemes of soil erosion and simple methods using the empirical relationship between soil erosion and annual total rainfall. This study is aimed to quantitatively evaluate the variation among the R factors estimated using different methods for South Korea. Station based observation (minutely rainfall data) were collected for 72 stations to investigate the characteristics of rainfall events over the country and similarity and differentness of R factors calculated by each method were compared in various ways. As results use of simple methods generally provided greater R factors comparing to those for energy based methods by 76 % on average and also overestimated the range of factors using different equations. The variation coefficient of annual R factors was calculated as 0.27 on average and the results significantly varied by the stations. Additionally the study demonstrated the rank of methods that would provide exclusive results comparing to others for each station. As it is difficult to find universal way to estimate R factors for specific regions, the efforts to validate and integrate various methods are required to improve the applicability and accuracy of soil erosion estimation.

ISO 표준방사선장을 이용한 필름배지의 선량평가 알고리즘 개발 (Development of Dose Evaluation Algorithm for Film Badge Using ISO Reference Radiations)

  • 김장렬;장시영;이재기
    • Journal of Radiation Protection and Research
    • /
    • 제20권1호
    • /
    • pp.37-44
    • /
    • 1995
  • 과학기술처의 개인방사선피폭선량평가에 관한 기술기준이 제정된 이후 TLD에 의한 개인피폭선량평가 기술은 많은 발전이 있었으나, 우리나라 대부분의 방사선관련 산업체에서 방사선 피폭관리용으로 사용되고 있는 필름배지의 정확한 선량평가기술을 확보하기 위한 연구는 아직도 미진한 상태이다. 따라서 본 연구에서는 ISO 표준방사선장을 이용하여 i) 실험식에 의한 방법, ii) Degree-of-fit에 의한 방법, 그리고 ) Matrix에 의한 방법으로 필름배지에 의한 선량평가 알고리즘개발방법을 제시하였다. 이러한 방법들에 의한 계산값은 조사량과 ANSI N13.11에서 제시하고 있는 성능지수 이내에서 잘 일치하였으며, 이는 X, ${\gamma}$ 혹은 혼합방사선장에서 선량평가에 유용하게 혼용될 수 있을 것이다.

  • PDF

해수의 전기전도도에 미치는 압력의 영향 ( I ) -고압하에서의 해수의 비전도도- (THB EFFECT OF PRESSURE ON THE ELECTRICAL CONDUCTIVITY OF SEA WATER( I ) -The Specific Conductance of Sea Water under High Pressure-)

  • 김장양;황금소
    • 한국수산과학회지
    • /
    • 제10권4호
    • /
    • pp.205-212
    • /
    • 1977
  • 혼합된 전해질 용액의 성질은 비교적 많이 연구되어 있으나 해수는 대단히 복잡한 전해질이므로 아직까지 밝혀지지 않은 부분이 많다. 특히 십해수는 높은 압력하에 있으므로 더욱 밝혀지지 않고 있으며, 근간에 고압하에서 해수연구가 성행되고 있는 실정이다. 본실험에서는 압력$(1\~2,000bar)$과 온도$(10\~35^{\circ}C)$에 바른 해수의 전기전도도를 측정하고 아울러 십도의 영향을 보기위해 농도$(6.228\~19.372,Cl\%_{\circ})$를 바꾸어 가면서 실험한 결과 비전도도와 압력사이에는 두 개의 직선관계가 있음을 알았다. 첫번째 직선은 압력이 $1\~l,000bar$범위에서 비교적 가파른 양의 기울기를 보여 주었지만, 두번째 직선은 $1,000\~2,000bar$ 범위에서 완만한 기울기 값을 보여 주었고 이들 결과를 Home et al. (1963)이 구한 결과와 비교 검토하였다.

  • PDF

거친 절리면의 전단거동 해석을 위한 탄소성 구성법칙 (An Elasto-Plastic Constitutive Law for Modeling the Shear Behavior of Rough Rock Joints)

  • 이연규;이정인
    • 터널과지하공간
    • /
    • 제8권3호
    • /
    • pp.234-248
    • /
    • 1998
  • 거친 절리면의 수직팽창 특성이 전단거동에 미치는 영향을 고려할 수 있는 새로운 전단거동 구성법책을 탄소성이론에 근거하여 제시하였다. 공식화 과정에서는 항복함수 및 소성포텐셜 함수로 Barton의 경험적 강도식들이 이용되었다. 전단강도의 경화 및 연화현상을 반영시키기 이해 mobilized JRC 개념이 적용되었다. 최대전단강도 이전과 이후의 JRC 변화는 절리면 전단방향 소성일의 함수로 표현할 수 있다고 가정하였다. 제안된 구성모델을 개별체 절리 유한요소에 적용하여 실행시켰다. 경계조건을 달리한 수치 직접전단시험을 통하여 제안된 모델을 검증하였다. 해석결과는 여러 문헌에 보고된 실험결과들과 잘 일치하였다. 또한 제안된 모델은 거친 절리면의 전단시험에서 특징적으로 나타나는 현상들을 잘 모사할 수 있음을 보였다.

  • PDF

아크 치료를 위한 고속 근사선량모델 개발 (Fast Approximate Dose Model Used in Arc Therapy)

  • 서태석;서덕영
    • Journal of Radiation Protection and Research
    • /
    • 제20권4호
    • /
    • pp.227-236
    • /
    • 1995
  • 선량데이타와 정확한 3차원 선량모델을 이용하여 여러 아크에 대한 선량분포를 조사하였다. 정확한 선량모델에 의해 계산된 선량 값은 판단한 실험식으로 표현이 가능했으며 이는 선량 최적화 과정에서 반복적으로 선량 값을 계산하는데 매우 유용하였다. 360도 아크와 부분 아크에 대한 선량 값을 빠른 속도로 계산하기 위하며 실험적으로 구해진 실린더형 선량모델을 개발하였다. 200개 위치의 정확한 선량 값을 비선형식으로 피팅하여 7개의 변수를 포함하는 실험식을 개발하였다. 결과적으로 이 모델을 이용하는 경우 한 아크에 대한 선량 계산시 400개의 위치를 계산하는데 PC-486으로 1초 이내에서 계산이 가능하였다. 결론적으로 개발된 고속선량모델은 정확한 선량모델에 의한 선량 값과 유사한 값을 제공함으로써 계간속도가 늦은 일반 3차원 선량모델을 대치할 수 있을 것으로 사려된다.

  • PDF

원판 캐비테이터의 환기 초공동에 대한 실험적 연구 (An Experimental Study on Ventilated Supercavitation of the Disk Cavitator)

  • 김병진;최정규;김형태
    • 대한조선학회논문집
    • /
    • 제52권3호
    • /
    • pp.236-247
    • /
    • 2015
  • In this paper, the experimental equipments for ventilated supercavitation in cavitation tunnel is constructed and the basic data of ventilated supercavitation regard to the entrainment coefficient and Froude number is fulfilled. The experiments are conducted for the disk cavitator with injecting air and the pressure inside cavity and the shape of cavity are measured. As the entrainment coefficient increases while the Froude number is kept constant, the ventilated cavitation number decreases to a minimum value which decreases no more even with increasing the air entrainment. The minimum value of ventilated cavitation number, caused by the blockage effect, decreases according to increasing the diameter ratio of test section to cavitator. The cavity length is rapidly enlarged near the minimum cavitation number. In low Froude numbers, the cavity tail is floating up due to buoyancy and the air inside the cavity is evacuated from its rear end with twin-vortex hollow tubes. However, in high Froude numbers, the buoyancy effect is almost negligible and there is no more twin-vortex tubes so that the cavity shape becomes close to axisymmetric. In order to measure the cavity length and width, the two methods, which are to be based on the cavity shapes and the maximum width of cavity, are applied. As the entrainment coefficient increases after the ventilated cavitation number gets down to the minimum cavitation number, the cavity length still increases gradually. These phenomenon can be confirmed by the measurement using the method based on the cavity shapes. On the other hand, when the method based on the maximum width of cavity is used, the length and width of the cavity agree well with a semi-empirical formular of natural cavity. So the method based on the maximum width of cavity can be a valid method for cavitator design.