• 대한원격탐사학회지
• /
• 제29권3호
• /
• pp.307-314
• /
• 2013

The Bidirectional Reflectance Distribution (BRD) effect is critical to interpret the surface information using remotely sensed data. This effect was caused by geometric relationship between sensor, target and solar that is inevitable effect for data of optical sensor. To remove the BRD effect, semi-empirical BRDF models are widely used. It is faster to calculate than physical models and demanded less observation than empirical models. In this study, Ross-Li kernel and Roujean kernel were used respectively in National Aeronautics and Space Administration (NASA) and European Organization for the Exploitation of Meteorological Satellites (EUMETSAT) that are used to compare each other. The semi-empirical model consists of three parts which are isotropic, geometric and volumetric scattering. Each part contained physical kernel and empirical coefficients that were calculated by statistical method. Red and NIR channel of SPOT/VEGETATION product were used to compute Nadir BRDF Adjusted Reflectance (NBAR) over East Asia area from January 2009 to December 2009. S1 product was provided by VITO that was conducted atmospheric correction using Simplified Method of Atmospheric Correction (SMAC). NBAR was calculated using corrected reflectance of red and NIR. Previous study has revealed that Roujean geometric kernel had unphysical values in large zenith angles. We extracted empirical coefficients in three parts and normalized reflectance to compare both BRDF models. Two points located forest in Korea peninsular and bare land in Gobi desert were selected for comparison. As results of time series analysis, both models showed similar reflectance change pattern and reasonable values. Whereas in case of empirical coefficients comparison, different changes pattern of values were showed in isotropic coefficients.

• 한국ITS학회 논문지
• /
• 제8권6호
• /
• pp.46-54
• /
• 2009

본 연구는 무인신호위반단속장비의 사고감소 효과를 다루고 있다. 연구의 목적은 EB (Empirical Bayes)방법을 이용하여 사고감소 효과를 분석하는데 있다. 이를 위해 무인신호위반단속장비가 설치된 28개 교차점 728건의 사고자료를 이용한다. 연구의 주요결과는 다음과 같다. 첫째, 단순사고건수 방법의 사고감소 효과는 20.74%로 분석되었다. 둘째, 포아송과 음 이항 회귀모형을 이용하여 SPF모형이 개발되었으며, 과분산계수가 0에 가까워 포아송 회귀모형이 음이항 회귀모형보다 더 적합한 것으로 평가되었다. 아울러 포아송 모형의 ${\rho}^2$값이 0.409로 나타나 통계적으로 유의한 모형으로 분석되었다. 마지막으로, EB방법을 이용한 분석 결과, 사고가 3.89%에서 29.23% 감소된 것으로 나타났다.

• Coupled systems mechanics
• /
• 제7권4호
• /
• pp.395-406
• /
• 2018

This paper proposes a linear damping model of tire-soil system using semi-empirical method. A test rig was designed and developed to measure the vertical equivalent linear damping ratio of tire only and tire-soil system using Free-Vibration Logarithmic Decay Method. The test was performed with two kinds of tractor tires using a combination of five inflation pressure levels, two soil depths and four soil moisture contents in the paddy soil. The results revealed that the linear damping ratio of tires increased with decreasing tire inflation pressure; the linear damping ratio of tire-soil system also increased with decreasing tire inflation pressure and increased with the increasing soil depth (observed at 80 and 120 mm). It also increased with a relative increase of soil moisture contents (observed at 37.9%, 48.8%, 66.7% and 77.4%). The results also indicated that the damping ratio of tire-soil system was higher than that of tire only. A linear damping model of tire-soil system is proposed as a damping model in parallel which is established based on experimental results and vibration theory. This model will have a great significance in study of tractor vibration.

• Geomechanics and Engineering
• /
• 제18권5호
• /
• pp.545-554
• /
• 2019

The customary approach used in the blast vibration analysis is to derive empirical relations between the peak particle velocities of blast-induced waves and the scaled distance, and to develop patterns limiting the amounts of explosives. During the periods when excavations involving blasting were performed at sites far from residential areas and infrastructure works, this method based on empirical correlations could be effective in reducing vibrations. However, blasting procedures applied by the fast-moving mining and construction industries today can be very close to, in particular cities, residential areas, pipelines, geothermal sites, etc., and this reveals the need to minimize blast vibrations not only by limiting the use of explosives, but also employing new scientific and technological methods. The conventional methodology in minimizing blast vibrations involves the steps of i) measuring by seismograph peak particle velocity induced by blasting, ii) defining ground transmission constants between the blasting area and the target station, iii) finding out the empirical relation involving the propagation of seismic waves, and iv) employing this relation to identify highest amount of explosive that may safely be fired at a time for blasting. This paper addresses practical difficulties during the implementation of this conventional method, particularly the defects and errors in data evaluation and analysis; illustrates the disadvantages of the method; emphasizes essential considerations in case the method is implemented; and finally discusses methods that would fit better to the conditions and demands of the present time compared to the conventional method that intrinsically hosts the abovementioned disadvantages.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2014년도 제49차 동계학술대회논문집 22권1호
• /
• pp.89-92
• /
• 2014

This paper presents a secure and blind adaptive audio watermarking algorithm based on Empirical Mode Decomposition (EMD). The audio signal is divided into frames and each one is decomposed adaptively, by EMD, into several Intrinsic Mode Functions (IMFs). The watermark and the synchronization codes are then embedded into the extrema of the last IMF. The experimental results show that the proposed method has good imperceptibility and robustness against signal processing attacks.

• Journal of Information Processing Systems
• /
• 제12권1호
• /
• pp.109-128
• /
• 2016

This paper presents a new combined forecasting method that is guided by the soft set theory (CFBSS) to predict business failures with different sample sizes. The proposed method combines both qualitative analysis and quantitative analysis to improve forecasting performance. We considered an expert system (ES), logistic regression (LR), and support vector machine (SVM) as forecasting components whose weights are determined by the receiver operating characteristic (ROC) curve. The proposed procedure was applied to real data sets from Chinese listed firms. For performance comparison, single ES, LR, and SVM methods, the combined forecasting method based on equal weights (CFBEWs), the combined forecasting method based on neural networks (CFBNNs), and the combined forecasting method based on rough sets and the D-S theory (CFBRSDS) were also included in the empirical experiment. CFBSS obtains the highest forecasting accuracy and the second-best forecasting stability. The empirical results demonstrate the superior forecasting performance of our method in terms of accuracy and stability.

• 한국전산구조공학회논문집
• /
• 제35권6호
• /
• pp.333-342
• /
• 2022

경험식에 기반한 폭발 해석방법은 폭압-시간 이력곡선을 하중으로 적용하여 해석하는 방법이다. 이 방법은 모델링이 간단하고 해석시간이 짧아 효율적이지만, 일부 연구에 따르면 근거리 폭발 해석에는 적합하지 않음이 보고되고 있다. 본 연구에서는 예로써 환산거리 0.4~1.0의 근거리 폭발조건에 있는 RC 보에 대해 해석방법에 따른 결과의 차이 및 원인을 분석하였고, 이를 통해 경험식 방법을 이용한 해석의 적용 범위를 구체적으로 검토 및 확인할 수 있었다. 사용된 유한요소해석 프로그램은 LS-DYNA이다. 해석결과에 따르면, 원거리 폭발 실험 데이터를 근거로 하는 경험식 해석방법은 충격량을 과소평가하고 있었다. 이로 인해 RC 보의 처짐은 측정된 처짐 또는 ALE(Arbitrary Lagrangian Eulerian) 해석결과에 비해 작게 계산되었다. 구조체의 응답이 크게 나타나는 근거리 폭발에 대해서는 ALE 해석방법을 사용하는 것이 더 적합할 것으로 사료된다.

• Journal of the Korean Statistical Society
• /
• 제20권1호
• /
• pp.44-56
• /
• 1991

For all pairwise comparisons of treatments, Bayesian simultaneous confidence intervals are proposed and studied. First Bayesian solutions are obtained for a fixed prior, and then prior parameters are estimated by a parametric empirical Bayesian method. The nominal confidence level is shown to be controlled asymptotically. An extension to the unbalanced design is also considered.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.359-364
• /
• 2001

In this study, we try to improve the accuracy of QN-GPH by the help of simulation approach. We first establish an estimation method for GPH distributions with sufficient accuracy based on empirical distribution, and then perform a brief trial run to find appropriate empirical distributions. After getting GPH form of distributions, we continue the QN-GPH analytic steps and compute necessary performance measures. We apply the method to find sojourn time distributions in a 8-node queueing system and compare the results with the whole simulation and the original two-parametric approximation.

• Communications for Statistical Applications and Methods
• /
• 제16권1호
• /
• pp.137-141
• /
• 2009

We study on selecting the kernel weighting function in smoothing moment conditions for dependent processes. For hypothesis testing in Generalized Method of Moments or Generalized Empirical Likelihood context, we find that smoothing moment conditions by Bartlett kernel delivers smallest size distortions based on empirical Edgeworth expansions of the long-run variance estimator.