• 제목/요약/키워드: Emission rate

검색결과 1,996건 처리시간 0.029초

디젤기관의 연료소비율 및 질소산화물 배출물에 미치는 EGR의 영향에 관한 연구 (A Study on Effect of EGR upon Fuel Consumption Rate and NOx Emission in Diesel Engines)

  • 배명환;임재근
    • 한국자동차공학회논문집
    • /
    • 제3권1호
    • /
    • pp.76-88
    • /
    • 1995
  • The effects of exhaust gas recirculation(EGR) on the characteristics of NOx emissions and specific fuel consumption rate have been investigated using an eight-cylinder. four cycle. direct injection diesel engine operating at several loads and speeds. The theoretical NO formation concentration is calculated with the equivalence ratio as a parameter of flame temperature to study the effect of EGR on NOx emissions in the diesel combustion. The experiments in this study are conducted on the fixed fuel injection timing of $38^{\circ}$ BTDC regardless of experimental conditions. It is found that the specific fuel consumption rate is slightly increased with EGR rate. and NOx emissions are markedly reduced owing to the drop of the incoming oxygen concentratio and the increase of equivalence ratio as the EGR rate increases.

  • PDF

수소-천연가스 혼합연료기관의 최적 수소 분사율 검토 (An Investigation on the Proper Hydrogen Mixing Rate in Heavy-Duty Hydrogen-CNG Engine)

  • 임희수;김윤영;이종태
    • 한국수소및신에너지학회논문집
    • /
    • 제15권2호
    • /
    • pp.89-97
    • /
    • 2004
  • A heavy duty hydrogen enriched CNG engine has the possibility to obtain stable operation at ultra lean condition and to reduce emission extremely. And it can also serve as a so called bridge technology between the current fossil fueled engine and the future hydrogen power system. The emission, torque and brake thermal efficiency characteristics of a heavy-duty hydrogen-CNG engine were investigated to determine the proper mixing rate of hydrogen and CNG. It was found that the proper mixing rates at ${\lambda}=1.4$ and ${\lambda}=1.6$ were around 20% and 30% for hydrogen addition rate respectively.

MECHANICAL과 Fugitive Dust Model을 이용한 비포장도로에서의 비산먼지 발생량 산정 및 주변영향 평가 (Estimation of fugitive dust emission and impact assessment by MECHANICAL and Fugitive Dust Model on a unpaved road)

  • 김인수;장영기
    • 환경영향평가
    • /
    • 제9권4호
    • /
    • pp.257-269
    • /
    • 2000
  • This study is to investigate the methodology and applicability on emission control by both MECHANICAL Model and Fugitive Dust Model (FDM) through the comparison of field measurement data and calculated data. Comparing to the method of AP-42 emission fector on the production of flying dust the MECHANICAL Model was proved to be more applicable to the calculation emission rate on the various dust emission conditions on a unpaved road. The seperate calculation on annual mean emission amount and a 24working hours amount was undertaken for the easy management of fugitive dust. Dust concentration predicted by FDM is similar with a measurement value.

  • PDF

RF 플라즈마에 의해 생성된 산소 플라즈마의 발광 스펙트럼 (Optical Emission Spectra of Oxygen Plasma Produced by Radio-Frequency Plasma)

  • 김도엽;김민수;김태훈;김군식;최현영;조민영;전수민;박성동;김진하;김은도;황도원;임재영
    • 한국진공학회지
    • /
    • 제18권2호
    • /
    • pp.102-107
    • /
    • 2009
  • 본 연구에서는 ZnO 박막을 성장하기 위한 plasma-assisted molecular beam epitaxy (PAMBE)에 장착된 플라즈마건에 13.56 MHz의 rf 전력을 인가하였을 때 발생되는 산소 플라즈마의 발광 스펙트럼을 광발광 분광기(optical emission spectroscopy: OES)를 이용하여 조사하였다. 실험은 산소 가스 유량을 1 sccm에서 20 sccm, rf 전력을 25W에서 250 W 범위에서 플라즈마건의 오리피스의 직경을 각각 3 mm 와 5 mm로 달리하여 행해졌다. 산소 플라즈마를 발생시켰을 때 오리피스의 직경에 상관없이 전형적인 산소 플라즈마의 발광 스펙트럼이 관측되었다. 특히 776.8 nm와 843.9 nm에서 $3p^{5}P-3s^{5}S^{0}$, $3p^{3}P-3s^{3}S^{0}$ 천이에 기인하는 강한 산소 원자 발광선이 관측되었다. 산소 유량과 rf 파워가 증가함에 따라 776.8 nm와 843.9 nm의 발광 세기는 증가하였고, 776.8 nm의 스펙트럼 발광 세기의 증가율이 843.9 nm의 스펙트럼 발광 세기 증가율보다 컸다. 또한 오리피스 직경이 3 mm일 때가 5 mm일 때보다 산소 플라즈마가 더 안정적으로 발생하였다.

부유형 챔버를 이용한 하수처리장에서의 암모니아 배출 특성 연구 (Development of NH3 Emission Factors using a Dynamic Flux Chamber in a Sewage Treatment Plant)

  • 전의찬;사재환;박종호
    • 환경영향평가
    • /
    • 제14권5호
    • /
    • pp.263-273
    • /
    • 2005
  • In this study, the major emission procedures and emission characteristics were identified at the site of sewage treatment plant which is one of the major sources of ammonia. At the same time the emission factors and emission rates were estimated. In order to calculate the emission flux, we used a Dynamic Flux Chamber(DFC), which is found to be a proper sampling devise for area sources such as sewage treatment plant. It was found that the most stable sampling condition was when the stirrer's speed of DFC was 120RPM, and it would be the best time to take a sample 60 minutes later after setting the chamber. The relatively higher flux was shown in Autumn compared to summer and winter. Annual ammonia emission rates procedures were calculated as $906.32{\mu}g/activity-ton$, $1,114.72{\mu}g/activity-ton$ and $437.53{\mu}g/activity-ton$ each at the primary settling basin, aeration basin and the final settling basin, respectively. The ammonia emission rate the highest at in the aeration basin according to this test. This results was due to that the surface of aeration basin or the final settling basin is relatively wider than the primary settling basin.

경유승용차 도입이 터널 소요환기량에 미치는 영향분석 (The effects of introduction of diesel passenger cars on the ventilation requirements for road tunnels)

  • 김효규;송석헌;김남영;이창우
    • 한국터널지하공간학회 논문집
    • /
    • 제9권3호
    • /
    • pp.309-321
    • /
    • 2007
  • 2005년 하반기부터 국내 승용차시장에 경유승용차의 시판이 허용되면서 시장점유율이 점증하고 있어, 향후 서유럽의 경우와 같은 수준으로 까지도 증가할 것으로 예상된다. 본 연구에서는 경유승용차의 확대보급에 따른 터널 소요환기량 및 환기설비용량 변화를 검토하기 위하여 차령, 차종구성비, 매연 배출량 변화추이를 감안한 기준배출량을 달리하는 3가지 경우를 비교 분석하였다. 전형적인 2km 길이의 2차선 고속도로 터널을 대상으로 한 비교연구에서 현 환기설계기준상의 기준배출량과 경유승용차 구성비 40%를 가정한 Case 1의 경우, 현 설계기준보다 상대적으로 많은 소요환기량 및 환기설비용량을 요구하였다. 차령은 고려하나 경유승용차를 감안하지 않은 기준배출량을 설계에 반영하고 있는 실제 터널을 대상으로 한 Case2와, 차령 및 경유승용차 보급률을 동시에 고려한 배출계수에 의한 기준배출량을 적용한 Case3은 모두 EURO-3 규제기준과 비슷한 수준의 환기특성을 나타내는 것으로 분석되었다. 한편, 국내 기존 환기설계기준에 적용하고 있는 환경부 제작차 허용배출량 기준은 EURO-2 규제기준보다 높은 편으로 조사되었으며, 2006년부터 적용하고 있는 허용배출량 기준은 EURO-4 규제기준과 비슷하게 분석되었다. 본 연구는 향후 국내 경유승용차의 확대보급에 따른 경유차량 구성비의 증가, 매연 배출량 규제에 따른 매연배출량의 감소 등의 변화를 고려한 오염물질의 기준배출량 산정을 통하여 최적 소요환기량 및 환기설비용량 결정을 하기 위한 기초자료의 제공을 목적으로 하고 있다.

  • PDF

한 시멘트공장의 분진발생과 대기확산에 관한 조사연구 (A Study on the Emission and Dispersion of Particulate Matter from a Cement Plant)

  • 장남익;정용;권숙표
    • Journal of Preventive Medicine and Public Health
    • /
    • 제16권1호
    • /
    • pp.67-77
    • /
    • 1983
  • To investigate the an air pollution by particulate matter and its dispersion, a cement plant produceing portland cement 600,000 ton/year and its vicinity were surveyed from Obtober, 1980 to April, 1983. The survey was mainly focused on main stack emmission rate of the cement plant and particle size distribution in the dust, dustfall and total suspended particulate concentration in the area by month and distance from the stack. The results of the study were as follows; 1. The main stack emission rate was surveyed before and after the spray tower was additionally installed to the original E.P bag filter. Before the spray tower installed, the main stack emission rate was higher ($0.64g/Nm^3$) than the emission standard of Korean Environmental Preservation Law's ($0.59g/Nm^3$, amended to $0.4g/Nm^3$ on April 1983), but after the spray tower was installed, its main stack emission rate was markedly decreased to the standard ($0.43g/Nm^3$). 2. $2{\sim}3{\mu}m$ of the particle size was the largest portion (20.8%) of the dust particulate from the main stack and 50% of the frequency distribution was $1.5{\mu}m$ of the size. Most particle size was below $10{\mu}m$. 3. The spray tower reduced the dustfall to $37.81{\sim}9.76\;ton/km^2/month$ while dustfall appeared at $45.29-15.45ton/km^2/month$, in the vicinity of plant before spray tower installed 4. Mean concentrations of total suspended particulate for 24 hours of the various stations were determined in $20.6-200.0{\mu}g/m^3$, 3 stations of tham were higher than the value of Harry and William's arthmetic average standard $130{\mu}g/m^3$. 5. Linear regression between dustfall [X] and total suspended particulate[Y] concentration was an equation, Y=4.024X+11.479.[r=0.91] 6. During the whole seasons in the opposite area 100m apart from the omission source the prevailing wind direction was with estimated more than $30ton/km^2/month$, and the concentration of total suspended particulate for 24 hours averaging time was more than $140{\mu}g/m^3$ in the same area and direction. 7. Assuming the wind direction were constant through the day dustfalls for a day were estimated at $13.40ton/km^2/day,\;10.79ton/km^2/day$ and $4.55ton/km^2/day$ at various distances of 100m, 500m and 1,500m from the emission source respectively. 8. In the simutalion of dustfall and suspended dust by area, Gaussian dispersion model modified by size distribution of particulate matter was not applicated since the emission of dust were from multi sources other them stack. From the above results, it could be applied that the dispersion of dust from the cement plant is estimated and regulated for the purpose of environmental protection.

  • PDF

식품폐수처리시설의 설비효율 개선에 따른 온실가스 배출량 평가 (Estimation of GHGs Emission to Improvement of Facility Efficiency in the Food wastewater Treatment Process)

  • 안상형;송장헌;김산;정진도
    • 한국산학기술학회논문지
    • /
    • 제20권2호
    • /
    • pp.378-384
    • /
    • 2019
  • 식품 폐수 처리 설비중 폐수처리장 폭기조 송풍 설비 개선을 통한 수질개선 효과 및 전기사용량 변화에 따른 온실가스 발생량을 평가 하였으며, 식품 폐수처리장에서 발생되는 슬러지를 탈수, 보관, 이송하는 설비의 효율적인 개선을 통한 전기사용량 개선전과 개선후 변화에 따른 온실가스 발생량도 함께 평가하였다. 폐수처리장 설비 개선에 따른 온실가스 배출량 평가는 폐수처리 공정으로 부터의 직접배출과 전력사용으로부터의 간접배출량으로 구분 된다. 폐수처리장 수질 개선 효과는 BOD 제거율이 63.3%, COD 제거율 42.0%, SS 제거율 71.0%, T-N제거율이 39.6%로 나타났으며, 폐수처리에 의한 온실가스 직접배출량(Scope 1)과 전력소비량 변화에 대한 온실가스 간접배출량(Scope 2)을 적용하여 온실가스 배출량을 산정한 결과 설비 개선전 3,668.8tCO2eq./yr 에서 설비 개선후 3,392.8tCO2eq./yr 으로 감소 하여 총 276.0tCO2eq./yr (8.0%)의 온실가스 감축 효과가 있는 것으로 평가 되었다. 이상의 결과는 배출원의 수질 개선 효과로 인한 것이 아니라 전기사용량 감소로 인해 온실가스 배출량이 감소하였기 때문이다.

대나무숯 액상코팅제의 제조 및 특성 (Formulation of Liquid Coating Agent using Bamboo Charcoal and its Characteristics)

  • 박상범;이희영;이상민;박종영
    • Journal of the Korean Wood Science and Technology
    • /
    • 제36권6호
    • /
    • pp.113-120
    • /
    • 2008
  • 본 연구는 포름알데히드와 같은 유해화학물질을 저감하고, 인체에 무해한 친환경 건축마감재를 개발하기 위하여 대나무숯분말, 편백추출수 및 바인더를 원료로 이용하여 실내 건축마감재용 액상코팅제를 제조하였다. 편백추출수의 함유량에 따른 액상코팅제의 유해화학물질에 대한 탈취율, 원적외선방사율, 음이온방출량, 항균성 및 실제 소요량을 조사하였다. 액상코팅제의 포름알데히드 탈취율은 60.0~98.6%, 암모니아 탈취율은 76.7~86.2%였다. 편백추출수의 혼합량이 증가함에 따라 탈취율도 증가하는 경향을 보였다. 액상코팅제의 원적외선방사율은 91.7%, 음이온 방출량은 77개/cc 였으며, 세균감소율은 99.4%로 항균력이 우수하였으나, 편백추출수의 혼합량 증가에 따른 이들 값에는 차이가 인정되지 않았다. 액상코팅제의 소요량은 스프레이건을 사용할 경우 $0.66kg/m^2$, 붓칠의 경우 $0.94kg/m^2$로 스프레이건을 이용할 경우가 더 효율적이었다.

플럭스챔버에 의한 매립지표면 메탄의 배출량 측정과 분석 (Surface Flux Measurements of Methane from Lamdfills by Closed Chamber Technique and its Validation)

  • 김득수;장영기;전의찬
    • 한국대기환경학회지
    • /
    • 제16권5호
    • /
    • pp.499-509
    • /
    • 2000
  • Next to carbon dioxide, methane is the second largest contributor to global warming among anthropogenic greenhouse gases. Methane is emitted into the atmosphere from both natural and anthropogenic sources. Natural sources include wetlands, termites, wildries, ocean and freshwater. Anthropogenic sources include landfill, natural gas and oil production, and agriculture. These manmade sources account for about 70% of total global methane emissions; and among these, landfill accounts for approximately 10% of total manmade emissions. Solid waste landfills produce methane as bacteria decompose organic wastes under anaerobic conditions. Methane accounts for approximately 45 to 50 percent of landfill gas, while carbon dioxide and small quantities of other gases comprise the remaining to 50 to 55 percent. Using the closed enclosure technique, surface emission fluxes of methane from the selected landfill sites were measured. These data were used to estimate national methane emission rate from domestic landfills. During the three different periods, flux experiments were conducted at the sites from June 30 through December 26, 1999. The chamber technique employed for these experiments was validated in situ. Samples were collected directly by on-site flux chamber and analyzed for the variation of methane concentration by gas chromatography equipped with FID. Surface emission rates of methane were found out to vary with space and time. Significant seasonal variation was observed during the experimental period. Methane emission rates were estimated to be 64.5$\pm$54.5mgCH$_4$/$m^2$/hr from Kimpo landifll site. 357.4$\pm$68.9mgCH$_4$/$m^2$/hr and 8.1$\pm$12.4mgCH$_4$/$m^2$/hr at KwanJu(managed and unmanaged), 472.7$\pm$1056mgCH$_4$/$m^2$/hr at JonJu, and 482.4$\pm$1140 mgCH$_4$/$m^2$/hr at KunSan. These measurement data were used for the extrapolation of national methane emission rate based on 1997 national solid waste data. The results were compared to those derived by theoretical first decay model suggested by IPCC guidelines.

  • PDF