• Journal of the Korean institute of surface engineering
• /
• v.41 no.5
• /
• pp.232-239
• /
• 2008

The dental orthodontic mini-screw requires good mechanical properties and high corrosion resistance for implantation in the bone. The purpose of this study was to investigate the electrochemical characteristics of TiN and ZrN coated orthodontic mini-screws, mini-screws were used for experiment. Ion plating was carried out for mini-screw using Ti and Zr coating materials with nitrogen gas. Ion plated surface of each specimen w as o bserved with f ield emission scanning e lectron microscopy ( FE-SEM), e nergy dispersive x-ray spectroscopy (EDX), and electrochemical tester. The surface of TiN and ZrN coated mini-screw were more smooth than that of other kinds of non-coated mini-screw due to dercrease of machined defects. The corrosion current density of the TiN and ZrN coated mini-screw decreased compared to non-coated sample. The corrosion potential of TiN and ZrN coated mini-screw were higher than that of non-coated mini-screw in 0.9% NaCl solution. The pitting corrosion resistance increased in the order of ZrN coated, TiN coated and non-coated wire. Pitting potential of ZrN coated mini-screw was the highest in the other specimens.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.1
• /
• pp.45-57
• /
• 2008

The purpose of this research is to select an appropriate location of water pollution prevention facilities(WPPF) through evaluating location decision factor using environmental geographic information system. To do that, this research reviewed the current location policies of WPPFs and its related researches. And this paper builds water pollutant statistical databases, integrated them with the geographic information system of the administrative areas where water pollutants are generated, and gears it with statistical programs such as correlation and regression analysis in order to figure out the pollution factors which influence on the location decision of WPPF on the real time base. The volume of discharge of industrial wastewater is one of the most important water pollutants on the location decision of WPPF. And the number of industrial facilities also was the most important location decision factor in constructing the WPPFs. In addition, this paper noted that the number of population in each area makes a role to restraint the construction of WPPF. It identified that the disposal facility in Nackdong river upper-middle watersheds was insufficient in treating the livestock pollutants. Therefore, Gyeongbuk should concentrate on the construction of disposal facilities of livestock pollutant in these areas. The results of this research will contribute to decide what kinds of WPPF should be constructed on which watershed in Nackdong River, and to forecast the future water quality of each watershed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.35-44
• /
• 2006

Reflective semiconductor optical amplifiers(R-SOAs) were designed with high gain, wide optical bandwidth, high thermal reliability and wide modulation bandwidth in TO-can package for the transmitter of wavelength division multiplexed-passive optical network(WDM-PON) application. Double trench structure and current block layer were introduced in designing the active layer of R-SOA to enable high speed modulation. The injection power requirement and the viable temperature range of WDM-PON system are experimentally analysed in based on Amplified Spontaneous Emission(ASE)-injected R-SOAs. The effect of the different injection spectrum in the gain-saturated R-SOA was experimentally characterized based on the measurements of excessive intensity noise, Q factor, and BER. The proposed spectral pre-composition method reduces the bandwidth of injection source below the AWG bandwidth and thereby avoids spectrum distortion impeding the intensity noise reduction originated from the amplitude squeezing.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.3
• /
• pp.71-76
• /
• 2017

The electrical behavior and flexibility of the screen printed Ag circuits were investigated with infrared radiation sintering times and sintering temperatures. Electrical resistivity and radio frequency characteristics were evaluated by using the 4 point probe measurement and the network analyzer by using cascade's probe system, respectively. Electrical resistivity and radio frequency characteristics means that the direct current resistance and signal transmission properties of the printed Ag circuit. Flexibility of the screen printed Ag circuit was evaluated by measuring of electrical behavior during IPC sliding test. Failure mode of the Ag printed circuits was observed by using field emission scanning electron microscope and optical microscope. Electrical resistivity of the Ag circuits screen printed on Pl substrate was rapidly decreased with increasing sintering temperature and durations. The lowest electrical resistivity of Ag printed circuit was up to $3.8{\mu}{\Omega}{\cdot}cm$ at $250^{\circ}C$ for 45 min. The crack length arisen within the printed Ag circuit after $10{\times}10^4$ sliding numbers was 10 times longer than that of after $2.5{\times}10^4$ sliding numbers. Measured insertion loss and calculated insertion loss were in good agreements each other. Insertion loss of the printed Ag circuit was increased with increasing the number of sliding cycle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.411-417
• /
• 2017

It is necessary to determine the current and future energy consumption by farm households for the rational specification of energy related policy in the Korean agricultural sector. Especially, It is important to identify the consumption by source of energy and by the crops. On the other hand, the world has tried to reduce the production of greenhouse gases and, in line with this, the Korean government established related legislations to contribute to this reduction (30% reduction in emissionsby 2020). The reduction target of the agricultural sector is specified as 5.2% of the national total. This study focuses on sampling design to determine the energy consumption and emission of greenhouse gases, and suggests several alternatives to improve the confidence level and to make a dent survey and estimation errors. The population for the energy consumption survey of the agricultural sector was derived from agricultural census data. In the case of commodities with high skewness, we cut the sample range to within the statistical significant range. The number of samples in each class is specified using the Neyman allocation method and 95% significance level. The estimation results are compared with the population to verify the statistical significance and several management methods of sampling errors are suggested.

• Journal of the Korean Institute of Gas
• /
• v.22 no.3
• /
• pp.74-83
• /
• 2018

Anyone who wants to install local ventilation system must obtain a permission from the Ministry of Employment and Labor even if he has permission from the Ministry of Environment. This is because not only the Atmospheric Environmental Protection Act, but also the manufacturing industry's hazardous risk prevention plan under Article 48 Clause 2 of the Industrial Safety and Health Act is to be submitted by 15 days before the construction. Under the current Environmental Protection Act, the Ministry of Environment regulates only the emission of pollutants from local exhaust ventilation systems into the atmosphere and the contents of workers' safety and health within industrial sites are managed by the Ministry of Employment and Labor. Even with the approval of the Ministry of Environment, the number of unsuccessful cases by the Ministry of Employment and Labor has increased, causing a growing discontent among the sites due to production delays and additional costs of improvement. In addition, local exhaust systems that are at greater risk of fire explosion have increased the risk of severe industrial accidents due to fire explosion. This is due to insufficient design of air volume, control speed, return speed, duct size, and risk of fire explosion. This is because the criteria and procedures for approval of local exhaust ventilation systems are similar, but the Industrial Safety and Health Act adds additional screening items for safety and safety of workers and fire and explosion. In this study, the Environment Ministry and the Employment and Labor Ministry seek to find a reasonable way to operate the system by comparing local exhaust ventilation system installation approval standards.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.6
• /
• pp.1-5
• /
• 2000

Recently alternating-current Plasma Display Panel(AC-PDP) is in the spotlight as a digital television and high definition television. The panel structure widely adapted in commercial AC-PDP is three electrodes surface discharge type. At present time, the luminous efficiency is around 1lm/W, it should be a key factor for the commercialization. For the high luminous efficiency, the development of panel structure is necessary. At a given panel structure, a driving method should be optimized to get a sufficient luminous efficiency. The display image of AC-PDP could be realized by the repeated light emission from the discharge. Because most of discharge power is consumed in the sustaining period, the optimization of sustaining waveform is very important for the high luminous efficiency. ADS (Address and Display period Separated) driving method is commonly used. The average driving frequency of ADS driving method is ranged by several tens kilo of [kHz], however the actual frequency of sustaining period is in range of 100[kHz] to 200[kHz]. Based on this study, when the phosphor emits the visible light, it has a decay time of few milliseconds due to the material transfer to the phosphor to emit the visible light. Consequently the luminous efficiency decreases in proportion to the driving frequency. It is found that the luminous efficiency could be significantly improved by the low frequency sustaining driving method.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.6
• /
• pp.62-71
• /
• 2008

Soil quality standards (SQS) are necessary to protect the human health and soil biota from the exposure to soil pollutants. The current SQS in Korea contain only sixteen substances, and it is scheduled to expand the number of substances. Chemical ranking and scoring (CRS) system is very effective to screen the priority chemicals for the future SQS in terms of their toxicity and exposure potential. In this study, several CRS systems were extensively compared to propose the assessment factors that required for the screening of soil pollutants The CRS systems considered in this study include the CHEMS-1 (Chemical Hazard Evaluation for Management Strategies), SCRAM (Scoring and Ranking Assessment Model), EURAM (European Union Risk Ranking Method), ARET (Accelerated Reduction/Elimination of Toxics), CRSKorea, and other systems. The additional assessment factors of CRS suitable for soil pollutants were suggested. We suggest soil adsorption factor as an appropriate factor of CRS system to consider chemical transport from soil to groundwater. Other factors such as soil emission rate and cases of accident of soil pollutants were included. These results were reflected to screen the priority chemicals in Korea, as a part of the project entitled ‘Setting the Priority of Soil Contaminants'.

• Journal of Korean Society of Forest Science
• /
• v.103 no.2
• /
• pp.264-269
• /
• 2014

The aim of this study was to determine the current distribution area of Robinia pseudoacacia habitat and to estimate its stand yield as well as its carbon stocks. In order to do so, the area of R. pseudoacacia distribution is obtained based on the large-scaled forest type map (1:5,000). Also, Weibull diameter distribution model is used to predict the yield of R. pseudoacacia stands. In addition, carbon emission factor is applied to calculate carbon stocks and removals. To obtain the stand yield of R. pseudoacacia, we developed estimation equation considering growth factors of the stand, e.g. mean diameter, the basal area, maximum and minimun diameter and etc. and tested it to ensure accuracy. Consequently, estimation equation derived from all growth factors have shown significance that could also be used for analysis. Site index was also established to determine the productivity of the forestland that later turned out to be ranging from 16 to 22. Based on these results, stand yield tables were drawn up. R. pseudoacacia is widely distributed in inland areas of Gyeongsang, Chungcheong and Gyeonggi provinces which covers total area of 26,770 ha. And when it is converted into carbon stocks, it amounts to 2,517,598tC with annual carbon uptake of 3.76tC/ha which is comparable to Querqus species that is known to storer large amounts of carbon. Therefore, R. pseudoacacia is also expected to serve as a viable carbon pool that would contribute to the mitigation of climate change. Furthermore, stand yield tables, an outcome of this survey would assist not only in proper management but also in sustainable management policy of R. pseudoacacia.

• Atmosphere
• /
• v.15 no.4
• /
• pp.213-227
• /
• 2005

The global mean surface temperature has already increased by $0.6{\pm}0.2^{\circ}C$ over the last century, and warming in Korea is approximately twice as large as the global average. The Intergovernmental Panel on Climate Change (IPCC) has concluded that the majority of warming over the past 50 years could be attributed to human activities (IPCC, 2001a). In addition, the global surface temperature is expected to increase by 1.4 to $5.8^{\circ}C$ depending on the greenhouse gas emission scenarios during the $21^{st}$ century.Climate change resulting from increased greenhouse gas concentrations has the potential to harm societies and ecosystems. Reductions in emissions of greenhouse gases and their concentration in the atmosphere will reduce the degree and likelihood of significant adverse conditions due to the anticipated climate change. Mitigation policy has generally been the primary focus of public attention and policy efforts on climate change. However, some degree of climate change is inevitable due to the combination of continued increases in emissions and the inertia of the global climate system. Adaptation actions and strategies are needed for a complementary approach to mitigation. The United Nations Framework Convention on Climate Change (UNFCCC) currently addresses vulnerability and adaptation in the context of climate change negotiations and in future adaptation may be an important element of work under the Kyoto Protocol. There are several on-going programs to develop effective adaptation strategies and their implementation. But in general, many other countries are still on an initiating stage. The climate change science programs of the United States, Japan, England, and Germany are initiated to understand the current status of climate change science and adaptation researches in the developed countries. In this study, we propose the improvement on systems in policy and research aspects to effectively perform the necessary functions for development of nation-wide adaptation measures and their implementation. In policy aspect, the Korean Panel on Climate Change (KPCC) is introduced as a coordinating mechanism between government organizations related with climate change science, impact assessment and adaptation. Also in research aspect, there is a strong consensus on the need for construction of a national network on climate change research as trans-disciplinary research network.