• Journal of Animal Environmental Science
• /
• v.4 no.2
• /
• pp.183-191
• /
• 1998

This study was carried out to elucidate the correlation between Germination Index(G.I.) and CO2 emission for evaluation of the maturity of compost products. 13 compost samples was used for this experiment. The G.I. test was carried out on the basis of T-N 200ppm. As a result of this research, we found that CO2 emission method was good simple indicator for evaluation of maturity of compost materials, in spite of G.I. The obtain results are summarized as follows ; 1. The correlation value between the G.I. and the CO2 emission was R2 = 0.776. 2. The correlation value between EC(Electric Conductivity) and G.I. was R2 =0.7. 3. The equation calculated from G.I. and CO2 emission was G.I. = -16.7(InCO2) - 6.87. 4. From these results, we found the possibility of estimation for the value of G.I.(T-N 200ppm) from CO2 emission volume under specific condition.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.6
• /
• pp.706-713
• /
• 2012

Global warming caused by greenhouse gases is threatening our ecosystem. Moreover, our food system is in severe danger. Recently the local food system is emerging as an alternative food network, decreasing food miles and carbon dioxide emissions, protecting the safety of our foods, and helping local economy. However, carbon labelling for agricultural products has not been introduced yet in Korea. Accordingly, research on food miles and carbon labelling for agricultural products should be urgently conducted. The study compared the food miles and the carbon dioxide emission of major agricultural products. In addition, the food mileages of garlic and carrot are compared between Korea and China. The results show that radish has the highest carbon dioxide emission, and followed by onion and cabbage. These products are produced from Jeju island and have a high Shipment volume. Although Chinese Garlic and radish have lower shipping volume and food miles than Koreans, they have higher carbon dioxide emissions due to ship transportation. Based on these results some valuable implications can be identified. Current food distribution system, which heavily focuses on the Metropolitan area, should be changed into a local system, in which foods are consumed in the local area first then transported to other area.

• Environmental Engineering Research
• /
• v.12 no.5
• /
• pp.203-210
• /
• 2007

Since the emissions composition from the household products have potentially been associated with health risks for building occupants, the chemical composition emitted from the products should be surveyed. The current study identified the emission composition for 42 liquid household products, using a purge-and-trap method. This evaluation was done by classifying the household products into five product classes (deodorizers, household cleaners, color removers, pesticides, and polishes). Nineteen compounds were chosen on the basis of selection criteria. The quality control program for purge-and-trap and analytical systems included tests of laboratory blank Tenax traps and blank water samples, and the determination of calibration equation, measurement precision, method detection limit (MDL), and recovery. The number of chemicals varied according to the product categories, ranging from 4 for the product category of bleaches to 12 for the product categories of air fresheners and nail color removers. For all product categories, the emission composition and concentrations varied broadly according to product. It is noteworthy that most household products emit limonene: 19 of 25 cleaning products; 5 of 6 deodorizers; 1 of 3 pesticides; 3 of 3 color removers; and 4 of 5 polishes. It was suggested that the use of household products sold in Korea could elevate the formation of secondary toxic pollutants in indoor environments, by the reaction of limonene with ozone, which entered indoor environments or might be generated by indoor sources such as electronic air cleaning devices and copying machines.

• Journal of the Korea Furniture Society
• /
• v.22 no.3
• /
• pp.219-229
• /
• 2011

Sick building syndrome symptoms that are experienced by building occupants may be caused by toxic substances such as formaldehyde and VOCs, which are known to be emitted from building materials and wood composite products such as wood-based panel, furniture, engineered flooring and construction adhesive. In Korea, the use of wood composite products for indoor environments has increased over the last decade. Recently, wood composite products have been installed in approximately 95% of newly constructed residential buildings. The use of these products has resulted in problems related to human health, and consequently a realization about the importance of indoor air quality. In addition, consumer demand is increasing for natural materials because conventional building materials and wood composite products are made by adding urea-formaldehyde resin or they contain formaldehyde-based resin. More recently, many efforts have been made to reduce formaldehyde emission from building materials that laid in the indoor environment. Especially, if conventional formaldehyde-based adhesives are replaced with green adhesives for residential spaces, it is possible to reduce most of the emission amounts of formaldehyde in indoor environments. In line with this expectation, many researches are being conducted using natural materials such as tannin and cashew nut shell liquid (CNSL). This study discussed the affects and possibilities of green adhesives to reduce formaldehyde emission in indoor environments.

• Plant Biotechnology Reports
• /
• v.3 no.1
• /
• pp.57-65
• /
• 2009

Cultured Cupressus lusitanica cells induced by various stresses are thought to produce different complexes of defense chemicals to optimize defense. To compare the induced products of two stimulations, we investigated the emission of monoterpenes, biosynthesis of ${\beta}-thujaplicin$, and accumulation of lignin in mechanically stressed and fungal elicited cultured C. lusitanica cells. Both mechanical stress and fungal elicitor caused emission of qualitatively similar monoterpene blends indicating de novo biosynthesis of these compounds after stimulation, while mechanical stress alone is sufficient to induce fungal elicitor-related monoterpene emission. Sabinene and limonene were the dominant compounds over the time course in both volatile blends. Although the emitted volatile blends were qualitatively similar, the time course and the relative ratios of the constituents of the volatile blends differed with the type of stimulation. While fungal elicited cells produced significant amounts of ${\beta}-thujaplicin$ over the 5-day time course, no ${\beta}-thujaplicin$ was observed in the mechanically stressed cells. The production of ${\beta}-thujaplicin$ was the main dissimilarity of the induced products of these two treatments, suggesting that synthesis of ${\beta}-thujaplicin$ is not a general response to all types of stresses, but is a specific response and serves as a strong toxic compound against already invaded fungus. Significantly higher amounts of lignin accumulations were observed in the fungal elicited and mechanically stressed cells on the 5th day after induction. Based on these results, we suggest the composition of induced products was dependent on the method of stimulation.

• Journal of Korea Trade
• /
• v.25 no.2
• /
• pp.58-74
• /
• 2021

Purpose - This paper research on the embodied carbon emission in Sino-Korea trade. It calculates and analyzes the carbon emission coefficient and specific carbon emissions in Sino-Korea trade from 2005 to 2014. Design/methodology - This paper conducted an empirical analysis for embodied carbon emission in Sino-Korea trade during the years 2005-2014, using a multi-region input-output model. First, direct and complete CO2 emission coefficient of the two countries were calculated and compared. On this basis, combined with the world input-output table, the annual import and export volume and sector volume of embodied carbon emission are determined. Then through the comparative analysis of the empirical results, the reasons for the carbon imbalance in Sino-Korea trade are clarified, and the corresponding suggestions are put forward according to the environmental protection policies being implemented by the two countries. Findings - The results show that South Korea is in the state of net trade export and net embodied carbon import. The carbon emission coefficient of most sectors in South Korea is lower than that of China. However, the reduction of carbon emission coefficient in China is significantly faster than that in South Korea in this decade. The change of Korea's complete CO2 emission coefficient shows that policy factors have a great impact on environmental protection. The proportion of intra industry trade between China and South Korea is relatively large and concentrated in mechanical and electrical products, chemical products, etc. These sectors generally have large carbon emissions, which need to be noticed by both countries. Originality/value - To the best knowledge of the authors, this study is the first attempt to research the embodied carbon emission of ten consecutive years in Sino-Korea Trade. In addition, In this paper, some mathematical methods are used to overcome the error problem caused by different statistical caliber in different databases. Finally, the accurate measurement of carbon level in bilateral trade will provide some reference for trade development and environmental protection.

• 한국연소학회:학술대회논문집
• /
• 2012.04a
• /
• pp.263-266
• /
• 2012

The characteristics of mild combustion and pollutant emission were investigated computationally with supplied air stream temperature and dilution rate in jet flame. The air was diluted with main combustion products. As dilution rate increased at fixed air temperature, the temperature distribution of burner inside was uniformed and the maximum mole fraction of CO and NO was decreased. In addition, emission indices for NO, CO, and $CO_2$ were compared with air temperature and dilution rate.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.5
• /
• pp.29-41
• /
• 2006

This study was to investigate the effect of adding additive as tannin, rice husk and charcoal, for reducing the formaldehyde emission level, on the adhesion properties of urea-formaldehyde (UF) resin for particleboard. We controlled the hot-pressing time, temperature and pressure to determine the bonding strength and formaldehyde emission. Blends of various UF resin/additives (tannin, rice husk and charcoal) compositions were prepared. To determine and compare the effect of additives (tannin, rice husk and charcoal) content, 0, 5, 10 and 15%, by weight of UF resin, were used. $NH_4Cl$ as hardener added. To determine the level of formaldehyde emission, we used the desiccator, perforator and 20 L-small chamber method. The formaldehyde emission level decreased with increased additions of additive (except rice husk). Also, increased hot-pressing time decreased formaldehyde emission level. At a charcoal replacement ratio of only 15%, the formaldehyde emission level is under F ✩ ✩ ✩ ✩ grade (emit < $0.3mg/{\ell}$). Curing of the high tannin additive content in this adhesive system indicated that the bonding strength increased. But, in the case of rice husk and charcoal, the bonding strength was much lower due to the inorganic substance. Furthermore, rice husk was poor in bonding strength as well as formaldehyde emission than tannin and charcoal.

• Journal of Korea Foresty Energy
• /
• v.24 no.1
• /
• pp.28-32
• /
• 2005

This study was performed to find a new use of wood tar from the manufacturing process of wood charcoal. Plywoods made of phenol adhesives mixed with wood tar were manufactured, and physical, mechanical properties and formaldehyde emission were investigated. Plywoods made of phenol adhesives mixed with wood tar were almost same as an original phenol adhesive in physical and mechanical properties and tensile-shear adhesive strength of the plywood was higher than the original one in both non-waterproof and waterproof tests. Formaldehyde emission was lower as the amount of wood tar increased in phenol adhesive.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.357-366
• /
• 2014

Based on fundamental properties and machining characteristics of Yellow poplar (Liriodendron tulipifera L.), it has well performance on machinability or workability, drying, and fine surface. Additionally, yellow poplar is light weight and has bright color with high performance of bending processing, so it could be used for furniture or artworks materials and wood-based panel materials. Recently, public attention has been focused on indoor air quality, and Ministry of environment drift more tight regulation on indoor air quality for an apartment house and public facility with the times. Construction materials has been assessed emission of volatile organic compounds (VOCs) and formaldehyde according to law (No.10789), so yellow poplar is also needed to assess these emission characteristics. Emission of VOC and aldehyde compounds from dry and green wood condition of yellow poplar were investigated with KS M 1998:2009. Based on results, more than 30 compounds were detected from yellow poplar, and lower NVOC (natural VOC) were emitted than AVOC (Anthropogenic VOC) and OVOC (other VOC). Formaldehyde emission was lower than $5{\mu}g/m^3$ and acetaldehyde, ketone, and propionaldehyde were detected from yellow poplar. From dry yellow poplar, m-Tolualdehyde ($33.6{\mu}g/m^3$) was additionally detected while no detection of propionaldehyde. After drying process, amount of ketone emission increased significantly. The unique smell of yellow poplar may not only come from emission of acetaldehyde and propionaldehyde.