• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2337-2341
• /
• 2005

This paper presents the target detection method using Support Vector Machines(SVMs) and the navigation system using behavior-based fuzzy controller. SVM is a machine-learning method based on the principle of structural risk minimization, which performs well when applied to data outside the training set. We formulate detection of target objects as a supervised-learning problem and apply SVM to detect at each location in the image whether a target object is present or not. The behavior-based fuzzy controller is implemented as an individual priority behavior: the highest level behavior is target-seeking, the middle level behavior is obstacle-avoidance, the lowest level is an emergency behavior. We have implemented and tested the proposed method in our mobile robot "Pioneer2-AT". Comparing with a neural-network based detection method, a SVM illustrate the excellence of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.84.5-84
• /
• 2001

The objective of this paper is to develop a powered wheelchair controller based on EMG for users with high-level spinal cord injury. EMG is very naturally measured when the user Indicating a certain direction, and the force information which will be used for the speed of wheelchair is easily extracted from EMG. Furthermore, the emergency situation based on EMG will be checked relatively ease. We classified the pre-defined motions such as rest case, forward movement, left movement, and right movement by Fuzzy Min-Max Neural Networks (FMMNN). This classification results shows the feasibility of EMG as an input interface for powered wheelchair. To make the system low cost and small size, we developed EMG AMP and its controller ...

• 자동차안전학회지
• /
• 제11권2호
• /
• pp.11-16
• /
• 2019

This paper suggests an algorithm for detecting fault of longitudinal controller in autonomous vehicles. Guaranteeing safety in fault situation is essential because electronic devices in vehicle are dependent each other. Several methods like alarm to driver, ceding control to driver, and emergency stop are considered to cope with fault. This research investigates the fault monitoring process in fail-safe system, for controller which is responsible for accelerating and decelerating control in vehicle. Residual is computed using desired acceleration control command and actual acceleration, and detection of its abnormal increase leads to the decision that system has fault. Before computing residual for controller, health monitoring process of acceleration signal is performed using hardware and analytic redundancy. In fault monitoring process for controller, a process model which is fitted using driving data is considered to improve the performance. This algorithm is simulated via MATLAB tool to verify performance.

• Journal of Electrical Engineering and Technology
• /
• 제4권4호
• /
• pp.429-437
• /
• 2009

This paper proposes a hybrid voltage controller based on a hierarchical control structure for implementation in the Jeju power system. The hybrid voltage controller utilizes the coordination of various reactive power devices such as generators, switched shunt devices and LTC to regulate the pilot voltage of an area or zone. The reactive power source can be classified into two groups based on action characteristics, namely continuous and discrete. The controller, which regulates the pilot bus voltage, reflects these characteristics in the coordination of the two types of reactive power source. However, the continuous type source like generators is a more important source than the discrete type for an emergency state such as a voltage collapse, thereby requiring a more reactive power reserve of the continuous type to be utilized in the coordination in order to regulate the pilot bus voltage. Results show that the hybrid controller, when compared to conventional methods, has a considerable improvement in performance when adopted to control the pilot bus voltage of the Jeju island system.

• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.163-169
• /
• 2003

Modeling of engine-generator system and its control responses are investigated using high performance generator controller. The nonlinear engine is modeled using mean torque production model based on experimental engine map. In case of diesel engine. the amount of injected fief is decided by engine controller depending on the APS(Acceleration Position Sensor) value. An electromechanical generator model contains electrical circuits and moment of inertia. The generator controller maximizes the performance of generator using decoupling and linearized current feedback control. The generator control system consists of 3-phase IGBT inverter and controller board based on 32 bit floating point DSP. Field oriented control algorithm with digital current feedback control at 10kHz sampling enabled high performance torque and speed control of induction machine. Not only the steady state but also the transient state responses can be evaluated through a batch test of the engine generator system. Developed engine and generator modeling and control can be utilized in various applications such as Series Hybrid Electric Vehicle(SHEV), engine-generator for emergency, and other hybrid generation systems.

• 전자공학회논문지SC
• /
• 제41권3호
• /
• pp.1-8
• /
• 2004

유도전동기의 속도제어시 속도의 지연이나 과도한 오버슈트가 발생하는 문제점을 해결하고 급제동 혹은 제동시 입력 속도와 출력 속도의 오차를 줄이기 위해서 LQ-PID제어기를 제안한다. LQ제어기는 극점들을 상태궤환에 의해 오버슈트와 정착시간등과 같은 설계사양을 만족하는 위치에 배치하는 방법이다. 그러나 폐루프 전달함수에 영점이 존재할때는 설계사양 오버슈트에 영향을 주므로 s-평면에서 기존의 LQ설계 방법으로는 이를 만족시킬 수 없다. 본 연구에서는 이와 같은 문제점을 해결하기 위해서 LQ제어기 설계시 폐루프 전달함수의 영점이 오버슈트에 미치는 영향을 제거할 수 있는 해석적인 방안을 포함하는 새로운 LQ-PID제어기 설계 방법을 제안하고자 한다.

• 한국항공운항학회지
• /
• 제26권4호
• /
• pp.64-75
• /
• 2018

A status of air traffic controller is a government officer and air traffic controllers who work at airport are divided by duty rating and work experience. Abiding by law, rules and regulation, air traffic controllers are working together based on mutual trust. This paper's theoretical background is based on cultural bias theory. The theory divide people group into four groups according to cultural bias such as fatalism, hierarchy, individualism and egalitarianism. A research model was designed how such four cultural bias could affect air traffic controller's risk response in case of emergency or abnormal situation during their work. Depend on empirical research, it was found that air traffic controllers perceived they had been more biased to fatalism than hierarchy. The characteristics of fatalism group are as follows: first of all, they follow rigid rules and regulation. However, they have less self-efficacy compared to other government officers. According to structural equation model, air traffic controller's fatalism had a significant negative effect on organizational royalty. Their royalty, however, had a very significant positive effect on planning response and immediate response.

• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.187-192
• /
• 2012

Recently, the electric device has been launching owing to the development of industry. That development also can maximize the efficiency of generator. The emergency rescue vehicle operation differs from ordinary vehicles in engine life and usage distances. For the application of this system, this research proposes the ways to operate the emergency rescue vehicle operations more efficiently. Currently, many power systems, especially motors, developed with a large output of power. It is possible to produce electricity in the engine room with enough space and to operate all equipment within the rating load capacity.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.871-875
• /
• 1998

A DSP-based source current control for power conditioner is presented to compensate current harmonics and asymmetries of three-phase four-wire emergency generators caused by nonlinear and/or unbalanced loads. There-phase voltage type converter with split-dc-capacitor is adopted as the power circuit and a new direct source current control method is suggested, which simplifies the controller. The proposed control method shapes the generator current sinusoidally inphase with the voltage and allows the generator to supply maximum power even to single phase loads. An IGBT base lookVA prototype with the controller realized with a DSP (TMS320C32) is built and tested to verify the performance of the power conditioner.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.22-29
• /
• 1993

A remote control system was developed in order to operate by push-buttons the conventional drum and chute components, which have been operated manually, in a concrete mixer-truck. As actuators, a hydraulic power unit was used for chute operations: two DC motors for drum operations. The devised drum controller consisted of three electric circuits : an analog proportional-integral control circuit, a drum acceleration circuit, and an emergency stop circuit. The remote control system was installed to be tested experimentally and then was evaluated to work successfully with a desirable accuracy.