• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.102-109
• /
• 2019

This paper describes the design of the circuit card assembly to eliminate the communication error on a servo control unit installed in the automated resupply vehicle K56. K56 is a weapon system that automates the supply and loading of ammunition on the K-55A1 self-propelled artillery. As the core item responsible for ammunition movement control, the servo control unit is required to have good communication stability and reliability, but the conventional unit has recognized a problem that communication error intermittently occurs, resulting in an emergency stop phenomenon. We analyzed the communication signal of the servo control unit and identified the failure cause of the circuit card assembly to solve this problem. In addition, the signal interference in data/address line of the circuit card assembly was confirmed through analysis of the failure cause, and redesigned to avoid the interference, such as adjustment of the distance between communication lines and position change. Finally, the proposed cause analysis and redesign were verified through the component of servo control unit and attachment test on K56. We expected these study results to be used as reference for the design of other similar items.

• Journal of the Korean Society of Radiology
• /
• v.12 no.2
• /
• pp.179-184
• /
• 2018

In this study, we compared the measured values of the effective beam size of standard gamma irradiator with the simulation results to provide a useful means to the effective beam area determination. Results of the simulation and measured using ion chamber was distributed in a relative error of 4.5 ~ 7.3% of the case of air kerma rate. The size of the effective beam area is when the simulation was implemented in the horizontal direction 27cm, 21.6cm vertical direction, the measured result using a film was obtained similar results with the horizontal direction 26.5cm, 21.9cm vertical direction. The relative error in the horizontal direction is 1.85% and 1.38% vertical effective beam area was also similarly distributed around the field gamma rays. As a result of the study, it was confirmed that the effectiveness of the simulation was sufficient for the gamma irradiation system. In particular, it is small relative errors in the effective beam size than the air kerma rate is considered to be due to the size of the beam is determined by geometric factors rather than the capacity of the standard source. A further study is needed to improve the reliability of the photon energy distribution diagram using simulation.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.297-304
• /
• 2015

This study concerns the integrated gas sensor system of wire and wireless communication by using IoT(Internet of Things) technology. First, communication part is that it delivers the detection information, which transferred by wire or wireless communication and required control procedure based on a wireless module that receives the gas leakage information from wired or wireless detector, to administrator or user's terminal. Second, receiver part is that it shows the location and information, which received from the wired detector formed by a detecting sensor's node as linking with the communication part, and transfers these to the communication part. Third, wireless detector formed as a communication module of a detecting sensor node is that it detects gas leakage and transfers the information through wireless as a packet.Fourth, wired detector communicated with the receiver part and formed as a communication module of a detecting sensor node is that it detects gas leakage, transfers and shows the information as a packet. Fifth, administrator's terminal is that it receives gas leakage information by the communication part, transfers the signal by remote-control, and shut off a gas valve as responding the information. Sixth, database is that it is connected with the communication part; it sets and stores the default values for detecting smoke, CO., and temperature; it transfers this information to the communication part or sends a gas detecting signal to user's terminal. Seventh, user's terminal is that it receives each location's default value which stored and set at the database; it manages emergency situation as shutting off a gas valve through remote control by corresponding each location's gas leakage information, which transferred from the detector to the communication part by wireless.It is possible to process a high quality data regarding flammable or toxic gas by transferring the data, which measured by a sensor module of detector, to the communication part through wire and wireless. And, it allows a user to find the location by a smart phone where gas leaks. Eventually, it minimizes human life or property loss by having stability on gas leakage as well as corresponding each location's information quickly.

• Fire Science and Engineering
• /
• v.28 no.2
• /
• pp.82-90
• /
• 2014

According to recent government's 3.0 operating paradigm for the opening and sharing of public information, relationship between humidity, temperature and fire occurrence were analyzed using the data in National Weather Service and National Emergency Management Agency. In order to analyze the relationships between humidity, temperature and fire occurrence, hourly frequency of fire occurrence compared with humidity and temperature ranges was suggested as an analysis method. Tendencies of fire occurrence frequencies were examined through this and characteristics of detailed attributes could be statistically identified. Results about hourly frequencies of fire occurrence by classifying the humidity ranges in each region showed increasing frequencies in all areas where the humidity is lower. Hourly frequencies of fire occurrence according to temperature ranges were identified to be similar in each area as well. In addition, characteristics of objects' attributes were analyzed including types of fire, igniting source of fire, initial complex, reasons of fire occurrence, and distinctive directions were suggested. Suggested method in this paper could be practically used when suggesting the frequency in each category in fire occurrence statistics of National Fire Information System.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.184-188
• /
• 2008

This study presented simple and efficient fabrication of chemical sensors for the detection of acidic gas using 1,3-bisdicyanovinylindane as an indicator because it can be promising materials having property of the rapid color change according to the variation of pH. The dissociation of proton and dye in acidic condition as changing of ion pairs give rise to dramatically change the absorbance intensity of 1,3-bisdicyanovinylindane, which can be easily applied to the development of chemical sensors. In addition, indicator dyes having negatively charge in aqueous phase can be easily fabricated using layer-by-layer (LBL) methods by way of electrostatic interaction. For the proof of concept, we demonstrated the abrupt presentation of skeleton symbol on the chemical sensor, which could be resulted from the reaction of 1,3-bisdicyanovinylindane as background color with acidic gas. Thus, the rapid appearance of symbol will induce user's caution under the emergency condition. The presented chemical gas sensor using 1,3-bisdicyanovinylindane have strong advantages. First, the fabrication process of gas sensor was very simple and low-cost. Secondly, sensors reacted by acidic gas could be reused for several times. Finally, the chemical gas sensor would be environmentally friend, which can be a basic tool for the realization of eco-organic sensor device.

• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.928-938
• /
• 2019

Republic of Korea has established 'Transmission and Reception for Terrestrial UHDTV Broadcasting Service' standard based on ATSC 3.0, the next-generation broadcasting standard in North America and is now providing commercial services. Republic of Korea has been studying terrestrial UHDTV based disaster broadcasting service using the ATSC 3.0 AEA system's technology since 2018. ATSC 3.0 has established a standard for expanding disaster broadcasting services, which were used to be simple push-type text message broadcasting, by introducing bidirectional and rich-media transporting mechanisms. However, the disaster information is still focused on the general public, and disaster broadcasting service including detailed information for the vulnerable are still insufficient. In this paper, we proposed the optimized disaster broadcasting service for vulnerable populations based on ATSC 3.0 after defined the disaster vulnerable populations as the target of the service. And we defined the extension element of disaster broadcasting message for service provision. The proposed service can be an effective means to increase the possibility of disaster information reception and evacuation to vulnerable populations. In addition, it is expected to be used as a basic research for development of diverse and effective advanced services for vulnerable populations through linkage with existing disaster alerting and countermeasures studies.

• Journal of Korean Society of Transportation
• /
• v.34 no.4
• /
• pp.318-329
• /
• 2016

There has been a growing interest on the effect of volcanic eruption on the aviation safety, air travel and economy especially after the eruption of Eyjafjallajokull in Iceland. Since volcanic eruption is influential on a large geographic region, the effect usually extends to other neighboring countries. Korea also has an active volcano named Mountain Baekdu. Hence, the need to estimate in advance the quantitative impact of the potential eruption of Mt. Baekdu on South Korean air transportation system. However, previous studies with quantitative estimation were confined to the calculation of the direct economic loss from shut down of the airports, grounding of airlines, and trade deficits caused by the eruption. Therefore, this paper introduces a new approach to assess more accurate impact simultaneously considering volcanic ash dispersal and aviation routes. This approach is then applied to a virtual scenario to predict the damage to air traffic. With further development, this method can help estimate the damage in the air transportation industry in more accurate and faster ways. Prediction outcomes can also be utilized in setting up the emergency response plan for the air transportation industry and contribute to the creation of more proactive and predictive measures in the future.

• Journal of Korean Society of Rural Planning
• /
• v.25 no.1
• /
• pp.113-125
• /
• 2019

The purpose of this study is to provide the demand information about services (S/W) and infrastructure (H/W) for rural welfare and culture. The survey was conducted on the overall satisfaction level, the condition change, the importance-satisfaction level of each field and the top priority items for administrative agencies and rural residents. In the overall satisfaction level, administrative agencies responded more than 'normal' to all fields, but the overall satisfaction level was lower than 'normal' in the fields excluding the healthcare field in the case of rural residents. In terms of condition changes compared to the past five years, both administrative institutions and local residents evaluated the improvement. IPA analysis was conducted to identify the priority ranking of each field and it was found that emergency medical facilities in the healthcare field, infant day care facilities in the social welfare field, movie theaters in the culture field, lifelong education institutions and academy facilities in the education field and private sports facilities in the leisure and sports field were most needed, respectively. The results of this study are expected to be helpful in increasing the efficiency and presenting the improvement direction about the development policy of the rural culture and welfare.

• The Journal of Society for e-Business Studies
• /
• v.23 no.4
• /
• pp.109-126
• /
• 2018

With massive and dense production, the livestock industry is rapidly moving into a large-scale, capital-intensive industry especially in swine, poultry, and ducks. However, livestock epidemics can pose a serious threat to the livestock industry and the lives of the people. The government has established and operates the National Animal Protection and Prevention System (KAHIS) since 2013 in order to control the threat, in accordance with the five stages. The digitalized data and information are excellent in ease of management, but it is also pointed out that it is difficult to take countermeasures through linkage with the data in an emergency situation. Recently, the technology of the fourth industrial revolution such as Internet of Things (IoT), Big Data, Artificial intelligence (AI) has been rapidly implemented to the livestock industry, which makes smart livestock disease control system possible. Therefore, this study investigated the domestic and overseas cases which apply 4th Industrial Revolution technology in the industry, and derived 13 possible candidate tasks in the near future. In order to ascertain the priority of policy formulation, we surveyed the expert groups and examined the priority of each of the five stages of the prevention and the priority of each stage. The results of this study are expected to contribute to the establishment of policies for the advancement of smart livestock disease control research and livestock protection.

• The Journal of the Korea Contents Association
• /
• v.18 no.12
• /
• pp.646-659
• /
• 2018

This study proposed "Reservoir Park", which added disaster prevention function to urban green spaces such as city parks through domestic and overseas related laws review, case studies, field trips. This is a combination of urban parks and reservoirs as urban planning facilities, which can provide both space for daily use by urban residents and disaster mitigation functions in case of emergency. In order to prevent flooding in urban areas due to climate change, facilities should be installed in the form of parks, etc., as the reservoir facility should be systematically reviewed together with urban planning facilities. However it was found that the reservoir park was not clear as a theme park. In this study, the types of storage facilities in urban areas were reclassified into five types of storage parks reflecting the characteristics of urban green spaces through domestic case studies and field trips. The classification of the reservoir parks is classified into 5 kinds such as ecological type, vegetation cover type, exercise facility type, underground burial type and hybrid type based on groundwater level, human use, and reservoir size. This classification system can be used to determine the types of facilities to be built after designating the location of future storage facilities.