• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.3
• /
• pp.1-9
• /
• 2016

The objective of this study was to exam early stages of plant growth of Euonymus fortunei 'Emerald and Gold' and Hedera japonica grown in fabric felt bag attached on vertical greenery system with the ratio of hydrophilic polymer to substrate, 0(referred as Control), 0.1, 0.2, or 0.4% (v/v), in order to effectively utilize rainfall for low maintenance. After rainfall, the increase in volumetric water content of substrate amended with the hydrophilic polymer was between 13% and 87%, compared to that in Control. During drought period, higher ratio of hydrophilic polymer to substrate slowly decreased the volumetric water content, and increased plant height, leaf length, leaf width, number of leaves, branch number, and stem diameter of both Euonymus fortunei 'Emerald and Gold' and Hedera japonica with the highest fresh and dry weights of shoots or roots under the 0.1% ratio of hydrophilic polymer.

• Journal of the Korean Ceramic Society
• /
• v.47 no.4
• /
• pp.302-307
• /
• 2010

This study aims to synthesize emerald-green malayaite pigments using $CaCO_3$, $SiO_2$, $SnO_2$ and $V_2O_5$. For this purpose, the optimum composition is $CaV_{0.25}Sn_{0.687}SiO_5$ and heating condition is at $1250^{\circ}C$ for 6 h of soaking time. The samples were characterized by X-ray diffraction (XRD), the Fourier Transform Infrared Spectrometers(FT-IR), the Raman Spectrometer, Scanning Electron Microscope(SEM) and the UV/Vis spectroscopy. The substituted V ion for Sn was observed to be quadrivalence. The analytical results of the synthesized pigment showed the tetragonal crystal, a typical form of Malayaite, and the particle size to be approximately $5{\sim}10\;{\mu}m$. The color in lime glaze added 12 wt% pigment was emerald green, and CIE Lab parameters are $L^*=67.73$, $a^*=-12.39$ and $b^*=9.28$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.532-538
• /
• 1998

Emerald ($3BeO{\cdot}Al_2O_3{\cdot}6SiO_2:Cr^{3+}$) single crystal was grown by temperature gradient reflux method with using Korean natural beryl. The flux of lithium-molibudenium-vanadium oxide system was made by means of mixing the 2 sort of flux which were differently melted $Mo_3-Li_2O$ and $V_2O_5-Li_2O$ each other. The optimum composition of flux was 3 mole ratio of molibudenium. vanadium oxides to lithium oxide ($(MoO_3+V_2O_5)/Li_2O$), flux additives were substituted more less then 0.2 mole% of $K_2O$ or $Na_2O$ to the $Li_2O$ amount. The melting concentration of mixing beryl material was 3~10% content to the flux, that of $Cr_2O_3$ color dopant was 1% to the beryl amount. In the crystal growing apparatus with temperature gradient in the 3 zone furnace which was separated into the block of melt, growth and return, the solution have got to circulate continuously between $1100^{\circ}C$ and $1000^{\circ}C$ in steady state. When thermal fluctuation was treated to during 2 hrs once on a day at 950~$1000^{\circ}C$ in growth zone, the supersaturation solution was maintained, controled and emerald single crystal can be grown large crystal which was prevented from the nucleation of microcrystallite. The preferencial growth direction of hexagonal columnar emerald single crystal was the c(0001) plane of botton side and vertical to the m(1010) plane of post side.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 1999.05a
• /
• pp.48-50
• /
• 1999

미국 J.C. Raulston 식물원에는 한국자생 조경수목 36과 110종 3품종이 재배되고 있다. 이중 때죽나무 'Emerald Pagoda' 신품종은 1985년 미국 국립식물원 식물탐사팀과 J.C Raulston이 소흑산도에서 꽃이 많고 잎이 크고 두꺼운 신품종으로 등록한 우리나라 자생종으로 미국내에서 감상가치가 매우 뛰어난 것으로 평가 받고 있다. J.C. Raulston은 이 때죽나무를 품종명 'Sohuksan'이라고 명명하였다가 'Emerald Pagoda'로 개칭하였다. Raulston은 소흑산 때죽나무를 수화물에 보관하여 미국에 도입했다. 도한 아왜나물를 진도에서 채집하였는데, 이것은 지금도 'Chindo'라는 품종으로 불이고 있으며 미구내 동남부 지바으이 조경에 적응성이 높고 감상가치가 높아 대량번식 및 보급 중에 있다.

• Korean Institute of Interior Design Journal
• /
• v.21 no.1
• /
• pp.269-279
• /
• 2012

According to a progress in the quality of life and economy, recent years have seen an increase in interest in the cruise travel. However, it is important to provide them the optimum embarkation environment since there are to be many and unspecified persons staying for a long period on the cruise ship. In the architectural design field, a wide range of efforts are being recently made to meet customer's requirements by considering the rapidly changing society, environment, and economic trend. The most representative one of such efforts is the inclusive design concept. This concept means to perform design satisfying all the function, convenience, aesthetic appreciation, and utility, regardless of sex, age, ability, nationality, cultural background or any kinds of disabilities. Regarding this trend, the convenience-oriented design of a cruise ship using the inclusive design concept was performed in this study. To do this, the composition of cabins and swimming pools, and the exterior of the cruise ship were classified into several groups through literature survey. Then, in the point of view of the inclusive design concept, inconvenience matters of passengers about the cabins, swimming pools, and exterior were also extracted from literature survey. Next, basis designs for them were selected among the classified groups in order to solve such inconvenience matters. Finally, the convenience-oriented design of the Emerald Princess Cruise considering the inclusive design concept was performed by applying the basis designs. As a result, we can see that the inclusive design concept can be applied to cruise ship design.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.5
• /
• pp.299-306
• /
• 2020

PURPOSE. The aim of this study was to evaluate the accuracy of six recently introduced intraoral scanners (IOSs) for single crown preparations isolated from the complete arch, and to determine the effect of scanning sequence on accuracy. MATERIALS AND METHODS. A complete arch with right and left canine preparations for single crowns was used as a study model. The reference dataset was obtained by scanning the complete arch using a highly accurate industrial scanner (ATOS Core 80, GOM GmbH). Six different IOSs (Trios, iTero, Planmeca Emerald, Cerec Omnicam, Primescan, and Virtuo Vivo) were used to scan the model ten times each. The scans performed with each IOS were divided into two groups, based on whether the scanning sequence started from the right or left quadrant (n=5). The accuracy of digital impression was evaluated using three-dimensional analyzing software (Geomagic Studio 12, 3D Systems). The Kruskal Wallis and Mann- Whitney U statistical tests for trueness analysis and the One-way ANOVA test for precision analysis were performed (α=.05). RESULTS. The trueness and precision values were the lowest with the Primescan (25 and 10 ㎛), followed by Trios (40.5 and 11 ㎛), Omnicam (41.5 ㎛ and 18 ㎛), Virtuo Vivo (52 and 37 ㎛), iTero (70 and 12 ㎛) and Emerald (73.5 and 60 ㎛). Regarding trueness, iTero showed more deviation when scanning started from the right (P=.009). CONCLUSION. The accuracy of digital impressions varied depending on the IOS and scanning sequence used. Primescan had the highest accuracy, while Emerald showed the most deviation in accuracy for single crown preparations.

• Imaging Science in Dentistry
• /
• v.51 no.4
• /
• pp.399-406
• /
• 2021

Purpose: This in vitro study measured and compared 3 intraoral scanners' accuracy (trueness and precision) with different span lengths. Materials and Methods: Three master casts were prepared to simulate 3 different span lengths (fixed partial dentures with 3, 4, and 5 units). Each master cast was scanned once with an E3 lab scanner and 10 times with each of the 3 intraoral scanners (Trios 3, Planmeca Emerald, and Primescan AC). Data were stored as Standard Tessellation Language (STL) files. The differences between measurements were compared 3-dimensionally using metrology software. Data were analyzed using 1-way analysis of variance with post hoc analysis by the Tukey honest significant difference test for trueness and precision. Statistical significance was set at P<0.05. Results: A statistically significant difference was found between the 3 intraoral scanners in trueness and precision (P<0.05). Primescan AC showed the lowest trueness and precision values(36.8 ㎛ and 42.0 ㎛;(39.4 ㎛ and 51.2 ㎛; and 54.9 ㎛ and 52.7 ㎛) followed by Trios 3 (38.9 ㎛ and 53.5 ㎛; 49.9 ㎛ and 59.1 ㎛; and 58.1 ㎛ and 64.5 ㎛) and Planmeca Emerald (60.4 ㎛ and 63.6 ㎛; 61.3 ㎛ and 69.0 ㎛; and 70.8 ㎛ and 74.3 ㎛) for the 3-unit, 4-unit, and 5-unit fixed partial dentures, respectively. Conclusion: Primescan AC had the best trueness and precision, followed by Trios 3 and Planmeca Emerald. Increasing span length reduced the trueness and precession of the 3 scanners; however, their values were within the accepted successful ranges.

• The Korean Journal of Emergency Medical Services
• /
• v.26 no.2
• /
• pp.7-18
• /
• 2022

Purpose: This study aimed to develop a pre-hospital subarachnoid hemorrhage (SAH) prediction tool by analyzing the extant predictive factors of patients with non-traumatic SAH who visited the hospital through the 119 emergency medical services. Methods: We retrospectively reviewed pre-hospital care reports (PCRs) and electronic medical records (EMRs) of 103 patients with non-traumatic SAH who were transported to the emergency department of two national hospitals via the 119 emergency medical service from January 1, 2017 to December 31, 2020. Variables required to apply the Ottawa SAH Rule and EMERALD SAH Rule, which are early prediction tools for SAH, were extracted and applied. Results: The most common symptoms-which were found in 94.1% and 97.0% of all patients according to PCRs and EMRs, respectively-appeared in the following order: headache, altered state of consciousness, and nausea/vomiting. When the variables used for the EMERALD Rule, namely systolic blood pressure (SBP), diastolic blood pressure (DBP), and blood sugar test (BST), were applied, the sensitivities of EMR and PCRs were 99.9% and 92.2%, respectively. Conclusion: For the timely prediction of SAH at the pre-hospital phase, patient age and symptoms should be assessed, and SBP, DBP, and BST should be measured to transport the patient to an appropriate hospital.

• Journal of Conservation Science
• /
• v.31 no.3
• /
• pp.193-214
• /
• 2015

The green pigments of shamanic paintings (83 items) in the 19~20th century were analyzed with X-ray fluorescent spectrometer(XRF), scanning electron microscopy (SEM) and fourier transform infrared spectroscopy (ATR-FTIR). In 60 items, copper and arsenic were detected in green pigments of the paintings by XRF spectra. Cu $K{\alpha}$/As $K{\beta}$ (peak intensity ratio of copper and arsenic) of shamanic paintings of Bokgaedang (shrine), solemn paintings (romance of three kingdoms) of Donggwanwangmyo and unknown enshrined place were 5.93~12.04 and higher compared to 5.67-6.26 of standard emerald greens and 4.01~7.89 of remaining shamanic paintings. The SEM images of crystal forms of copper-arsenic green pigments were various. Crystal forms were divided into oval and round spherulite with intersecting plate crystals and spherulite with agglomerate plate crystals. The crystals of the latter were found in shamanic paintings of Bokgaedang (shrine), solemn paintings (romance of three kingdoms) of Donggwanwangmyo and unknown enshrined place and the former were found in the rest of shamanic paintings. Copper-arsenic green pigments of shamanic paintings were identified as Scheele's green from shamanic paintings of Bokgaedang (shrine) and romance of three kingdoms. Emerald green from the rest of shamanic paintings by ATR-FTIR. From analytical results, it is confirmed that Scheele's green of shamanic paintings of Bokgaedang and romance of three kingdoms was used in the 1850s~1870s and emerald green had been widely used from late 19th century to 1970 in the rest of shamanic paintings.

• Journal of Bio-Environment Control
• /
• v.17 no.4
• /
• pp.293-296
• /
• 2008

This study was carried to select artichoke (Cynara scolymus L.) varieties that can be cultivated in non-heated greenhouse during winter in Jeju Island in Korea. Artichoke varieties namely, 'Purple Romagna' (Neseed Co.), 'Imperial Star' (Keithley Williams Seed Co.), 'Green Globe' (Park Seed Co.), 'Emerald' (Ferry-morse Seed Co.), 'Italian' (Unknown), and 'Carciofo Di Romagna' (Lortolano), were raised in a plug tray with 72 cells for two months and transplanted in a non-heated greenhouse on October 5, 2004. The first harvesting of 'Emerald' and 'Imperial Star' were the earliest and April 26 and 27, 2005 respectively. Most of the varieties were harvested from early May to June 2005. The number of head per plant was the highest in 'Green Globe' with more than five heads and the lowest were recorded in 'Italian' with one head or less. The weight of heads per plant was more than 228 g in 'Purple Romagna', 'Imperial Star' and 'Green Globe'. The highest yield was in 'Green Globe' with 2,172 kg/10a, followed by 'Imperial Star' with 1,947 kg/10a. Accordingly, it is considered that 'Green Globe' and 'Imperial Star' are adequate for the high-yield cultivation in non-heated greenhouse in Jeju Island. They can be harvested from the April to June when cultivated from the early October of the previous year.