• Journal of Internet Computing and Services
• /
• v.13 no.5
• /
• pp.93-104
• /
• 2012

Significant advancements in technology enhanced the reliability of navigation systems that are in use today. The GPS is the most widely used technique for satellite-based location estimation. However, systems based on GPS can only be accurate in providing location data when there is a clear view of the satellites. This paper proposes a self-contained navigation system that does not depend on any tracking infrastructure. Using the built-in sensors of a smartphone and a self-contained map, we implemented an accurate car locator. Evaluation results show that our proposed system outperforms GPS in providing accurate car location assistance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.560-562
• /
• 2010

Nowdays, The LED Illumination system can achieve lower power consumption and has a longer life-time compared to the fluorescent lamp system. Visible Light Communication(VLC) is wireless optical communication to use visible light of LED. This paper designs the indoor navigation of Location-Based Service(LBS) using LED illumination. and the parking guidance system using VLC in the underground parking lot. We show the result of experimentation and confirm possibility of the parking guidance system.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.664-671
• /
• 2013

In this paper, in an aircraft power can be measured by wireless AEMS (aircraft electric power measurement monitoring system) system is proposed. AEMS has been design based on current commercialized power measuring systems analysis with improvement and connects it with most talked about item, smart phone and monitoring system. And also adopting real time power measuring system, constitute more practical power measuring system by controlling electricity usage in real time.

• Journal of information and communication convergence engineering
• /
• v.19 no.3
• /
• pp.188-197
• /
• 2021

In military operations, an accurate localization system is required to navigate soldiers to their destinations, even in non-GPS environments. The global positioning system is a commonly used localization method, but it is difficult to maintain the robustness of GPS-based localization against jamming of signals. In addition, GPS-based localization cannot provide important terrain information such as obstacles. With the widespread use of embedded sensors, sensor-based pedestrian tracking schemes have become an attractive option. However, because of noisy sensor readings, pedestrian tracking systems using motion sensors have a major drawback in that errors in the estimated displacement accumulate over time. We present a group-based standalone system that creates terrain maps automatically while also locating soldiers in mountainous terrain. The system estimates landmarks using inertial sensors and utilizes split group information to improve the robustness of map construction. The evaluation shows that our system successfully corrected and combined the drift error of the system localization without infrastructure.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1767-1768
• /
• 2007

This paper represents a map building system of Embedded Linux mobile robot. We propose a localization method which uses multiple sensors such as indoor GPS and encoder sensor for simultaneous map building system. In this paper we proposed a multiple sensor system for SLAM. For this, we developed a sensor based navigation algorithm and grid based map building algorithm under the Embedded Linux O.S. We proved this system's validity through field test

• Journal of Positioning, Navigation, and Timing
• /
• v.6 no.4
• /
• pp.181-194
• /
• 2017

In recent years, research has been actively conducted on the navigation in an indoor environment where Global Navigation Satellite System signals are unavailable. Among them, a study performed indoor navigation by integrating pseudolite carrier and Inertial Measurement Unit (IMU) sensor. However, in this case, there was no solution for the cycle slip occurring in the carrier. In another study, cycle slip detection and compensation were performed by integrating Global Positioning System (GPS) and IMU in an outdoor environment. However, in an indoor environment, cycle slip occurs more easily and frequently, and thus the occurrence of half cycle slip also increases. Accordingly, cycle slip detection based on 1 cycle unit has limitations. Therefore, in the present study, the aforementioned problems were resolved by performing indoor navigation through the integration of pseudolite and ultra-low-cost IMU embedded in a smartphone and by performing half cycle slip detection and compensation based on this. In addition, it was verified through the actual implementation of real-time navigation.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.5
• /
• pp.303-309
• /
• 2011

In this paper, an intelligent force control technique is applied to an autonomous helicopter. Although most research on the autonomous helicopter system is about navigation and control, force control of an autonomous helicopter system is quite new and not presented yet. After controlling the position of the helicopter by the LQR method, force control is applied. The adaptive impedance force control algorithm is introduced and tested to regulate the desired force under unknown location and stiffness of the environment. To compensate for uncertainty from outer disturbance, a neural network is added to form an intelligent force control framework. Simulation studies show that the proposed force control algorithm works well.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.910-919
• /
• 2012

In this paper, we described development of on-board image processing system and its process and verified its performance through flight experiment. The image processing board has single ARM(Advanced Risk Machine) processor. We performed Embedded Linux Porting. Algorithm to be applied for object tracking is color-based image processing algorithm, it can be designed to track the object that has specific color on ground in real-time. To verify performance of the on-board image processing system, we performed flight test using the PNUAV, UAV developed by LAB. Also, we performed optimization of the image processing algorithm and kernel to improve real-time performance. Finally we confirmed that proposed system can track the blue-color object within four pixels error range consistently in the experiment.

• The KIPS Transactions:PartD
• /
• v.15D no.5
• /
• pp.609-620
• /
• 2008

The service handling the map data in the mobile device including navigation, LBS, Telematics, and etc., becomes various. The size of map data which is stored and managed in the mobile device is growing and reaches in several GB. The conventional navigation system has used the read-only PSF (physical storage format) in order to enhance the performance of system by maximum in the mobile device which has limited resources. So though a little part of the map data is changed the whole data must be updated. In general, it takes several ten minutes to write the 2 GB map data to a flash memory of mobile device. Therefore, we have developed the mobile spatial DBMS (database management system) to solve the problem which is that the partial map data couldn't be updated in the conventional navigation system. And we suggest the policy to guarantee the performance of the navigation system which is implemented using the spatial mobile DBMS and verify this by experiment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1700-1709
• /
• 2019

Recently, many researches have been under way to develop systems (services) to support the safety navigation of ships, and in these studies, common difficulties have been encountered in assessing the usefulness and effectiveness of the developed system. To solve these problems, we propose the DEVS-based ship navigation modeling and simulation technique. Following the preceding study, we analyze the COLREG rules and reflected to officer and helmsman agent models for decision making. Also we propose estimation and interpolation techniques to adopt the motion characteristics of the actual vessel to simulation. In addition, we implement the navigation simulation system to reflect the designed proposed methods, and we present five-scenarios to verify the developed simulation system. And we conduct simulations according to each scenario and the results were reconstructed. The simulation results confirm that the components modelled in each scenario enable to operate according to the navigation relationships.