• Earthquakes and Structures
• /
• v.3 no.3_4
• /
• pp.549-561
• /
• 2012

Many building foundations are embedded, however it is not easy to compact the backfill around the foundation especially for the deeply embedded ones. The soil condition around the embedded foundation may affect the seismic response of a building due to the weak contact between the soil and the foundation. In this paper, the response accelerations in the short-period range and at the period of 1 second (in the long-period range) for a seismic design spectrum specified in the IBC design code were compared considering perfect and poor backfills to investigate the effect of backfill compaction around the embedded foundation. An in-house finite-element software (P3DASS) which has the capability of horizontal pseudo-3D seismic analysis with linear soil layers was used to perform the seismic analyses of the structure-soil system with an embedded foundation. Seismic analyses were carried out with 7 bedrock earthquake records provided by the Pacific Earthquake Engineering Research Center (PEER), scaling the peak ground accelerations to 0.1 g. The results indicate that the poor backfill is not detrimental to the seismic response of a building, if the foundation is not embedded deeply in the soft soil. However, it is necessary to perform the seismic analysis for the structure-soil system embedded deeply in the soft soil to check the seismic resonance due to the soft soil layer beneath the foundation, and to compact the backfill as well as possible.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.3
• /
• pp.29-38
• /
• 2018

It is the approach of embedded system design that analyzes COS(Cut Out Switch) failure in the power distribution and an instantaneous breakdown of power distribution supply could cause the weakness of industrial competence and therefore we need to feed the stable power distribution with developing the technology of open-source embedded system. In this paper, we apply the LoRa technology which is the Internet of Things(IoT) protocol for low data rate, low power, low cost and long range sensor applications. We designed the hardware and software architecture setup and experimented the embedded system with network architecture and COS monitoring system including accelerometer for detecting the failure of distribution line and sensing the failure of its fuse holder by recognizing the variation and collision and afterwards sending the information to a gateway. With experimenting we designed the embedded platform for sensing the variation and collision according to the COS failure, monitoring its fuse holder status and transferring the information of states with LoRa technology.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.4
• /
• pp.47-54
• /
• 2022

In this paper, MEMS embedded system design implemented the sensor events via analyzing the characteristics that dynamically happened to an abnormal status in power IoT environments in order to guarantee a maintainable operation. We used three kinds of tools in this paper, at first Bluetooth Low Energy (BLE) technology which is a suitable protocol that provides a low data rate, low power consumption, and low-cost sensor applications. Secondly LSM6DSOX, a system-in-module containing a 3-axis digital accelerometer and gyroscope with low-power features for optimal motion. Thirdly BM1422AGMV Digital Magnetometer IC, a 3-axis magnetic sensor with an I2C interface and a magnetic measurable range of ±120 uT, which incorporates magneto-impedance elements to detect the magnetic field when the current flowed in the power devices. The proposed MEMS system was developed based on an nRF5340 System on Chip (SoC), previously compared to the standalone embedded system without bluetooth technology via mobile App. And also, MEMS embedded system with BLE 5.0 technology broadcasted the MEMS system status to Android mobile server. The experiment results enhanced the performance of MEMS system design by combination of sensors, BLE technology and mobile application.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.103-116
• /
• 2005

With embedded computing technology makes progress , various applications have been developing in PDA. And information exchanging through U document is underway actively between applications in internet environment. But most of the embedded system has Poor hardware resource. And embedded system uses own file system for XML document management. For reason of, it occurs to many of difficulties of data share and information exchange among other systems. Therefore, an importance of the XML Document Database Management System is on the rise in the embedded system. In this Paper, we design and implement Embedded XML Document Database Management System(EXDMS) for efficiently management of XML document and supporting data sharing and information exchanging through XML document in embedded system. As compared with file system, EXDMS shows results that more excellent performance about expandability and compatibility of application. Also, EXDMS has an excellent data Processing performance in poor system environment.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.2
• /
• pp.115-125
• /
• 2007

The ubiquitous embedded computers are firmly established as the basic electronic component of design that control military systems. Such applications can be found everywhere in the field of military system. A embedded computer is required to redesign when system needs performance upgrade or production-state of processor is NRND or EOL. This paper describes a scheme about impact analysis of designing processor alteration on embedded computer. In this case, hardware architecture and interrupt source of target system must be considered. Also, performance and throughput of that must be analyzed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.413-416
• /
• 2004

The tracking antenna system must be always pointed to a satellite for data link among moving vehicles. Especially, for an antenna mounted on a moving vehicle, it needs the stabilized the antenna system. So, software and hardware, signal processing of motion detection sensors, real-time processing of vehicle dynamics, trajectory estimation of satellite, antenna servo mechanism, and tracking algorithm, are unified in the antenna system. The purpose of this paper is to design the embedded tracking antenna control system for satellite communication. The embedded OS(Operating System) based stabilization and tracking algorithm was implemented. The performance of the designed embedded control system was verified by the real satellite communication test.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.653-656
• /
• 2003

We have designed embedded web sewer system and ported Linux operating system version 2.4.5 at our system. And then We implemented to control and monitor widely separated hardware and implemented to monitor widely separated image using CMOS image sensor HV7131B. Web server is the Boa web server with General Public License. We designed for this system using of Intel's SA1110 ARM core base processor and connecting input and output device at GPIO port of SA1110. Device driver of General purpose I/O for Embedded Linux OS is designed. And then the application program controlling driver is implemented to use of common gate interface C language. User is available to control and monitor at client PC. This method have benefit to reduce the Expenditure of hardware design and development time against PC base system and have various and capacious application against firmware base system.

• The KIPS Transactions:PartA
• /
• v.8A no.2
• /
• pp.75-80
• /
• 2001

The rapid design of the embedded system is crucial for improving the product’s competitiveness. Existing statechart tools used for designing the embedded system rely on the copy and paste of the statechart for reuse. However, such method has a major drawback of wasting both time and cost of the system developer. This paper implements the component supporting tool. A tool that makes efficient reuse of a statechart by adding a component function to the existing functions is implemented in this paper. Also, to add a component function, this paper restructured the contract as protocol of the inter-component. The implemented tool helps not only reduce the life cycle of a product, but also enhance a product’s competitiveness by supporting the product’s time-to-market.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.5 no.3
• /
• pp.268-273
• /
• 2005

We propose the specialized product-line development methodology for developing the embedded system of an MSDFS (Multi Sensor Data Fusion System : called MSDFS). The product-line methodology provides a simultaneous design between software and hardware, high level reusability. However this is insufficient in requirement analysis stage due to be focused on software architecture, detailed design and code. Thus we apply the business model based on IDEF0 technique to traditional methodology. In this paper, we describe the processes of developing Core-Asset, which are requirement analysis, feature modeling, validation. The proposed model gives the efficient result for eliciting features, and ensures the high level reusability of modules performing on embedded system.

• The KIPS Transactions:PartD
• /
• v.15D no.6
• /
• pp.815-824
• /
• 2008

Embedded system is applied in various fields and must equip system to respond market's requirement which is changing fast. Products that do not equip such fast construction system will have become sterilization. Construction system for Time-To-Market is reusability system or framework that have reused existent product and produce new product. Because embedded system is being based on hardware, amendment is not available easily, but can change system softly using segment of software. Therefore, in this paper, suggest meta-model of reusability framework that can change embedded software. Meta model of this paper suggests dynamic meta-model to design functional flow of reusability framework.