• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.6
• /
• pp.247-251
• /
• 2021

We propose a protocol for Ethernet-based industrial real-time communication networks. In the protocol, the master periodically transmits control frames to all slaves, and the ring-type network topology is selected to achieve high-speed transmission speed. The proposed protocol is implemented in the form of both firmware and Linux kernel modules. To improve the transmission speed, the MAC address table is disabled in the firmware implementation, and the NAPI function of the Ethernet driver is removed in the Linux kernel module implementation. A network experiment environment is built with four ARM processor-based embedded systems and network operation experiments are performed for various frame sizes. From the experimental results, it is verified that the proposed protocol normally operates, and the firmware implementation shows better transmission speed than the Linux kernel module implementation.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.5
• /
• pp.227-239
• /
• 2012

Recent advances in electronics have enabled various conventional products to incorporate with numerous powerful microcontroller. Generally, an embedded system is a computer system designed for specific control functions within a larger system, often with real-time computing constraints. The growing performance and reliability of hardware components and the possibilities brought by various design method enabled implementing complex functions that improve the comport of the system's occupant as well as their safety. A cyber physical system (CPS) is a system featuring a tight combination of, and coordination between, the system's computational and physical elements. The concept of cyber physical system, including physical elements, cyber elements, and shared networks, has been introduced due to two general reasons: design flexibility and reliability. This paper presents a cyber physical system where system components are connected to a shared network, and control functions are divided into small tasks that are distributed over a number of embedded controllers with limited computing capacity. In order to demonstrate the effectiveness of cyber physical system, an unmanned forklift with autonomous obstacle avoidance ability is implemented and its performance is experimentally evaluated.

• International Journal of Internet, Broadcasting and Communication
• /
• v.9 no.3
• /
• pp.9-16
• /
• 2017

Recently, more users have been using IoT embedded systems. Since the wireless network function is a basic and core function in most embedded systems, new security threats and weaknesses are expected to occur. In order to resolve these threats, it is necessary to investigate the security issues in the development stages according to the Security Development Lifecycle (SDL). This study analyzes the vulnerabilities of the embedded systems equipped with the wireless network function, and derives possible security threats and how dangerous such threats are. We present security risks including bypassing the authentication stage required for accessing to the embedded system.

• The Journal of Information Systems
• /
• v.17 no.1
• /
• pp.155-171
• /
• 2008

This thesis proposed a method that connecting step motor to image send board which can acquire image to move and remote controlling via streaming image board of PDA(personal digital assistant) based on embedded Linux which is using wireless network There are three embedded Linux system to embody movable image send board. First, though the wireless network a signal of PDA is transmitted to the board which has embedded Linux and a system which is controlled by the expansion I/O port of the board. Second, it's a system streaming realtime image at a PDA which has embedded Linux. The last is a system which controls a process of image board using TCP/IP communication and image send board at PC. These are the system which can use industrial settings and homes. It can also make use of an embodiment method about travelling image robot.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.177-179
• /
• 2006

This paper presents an analysis architecture of embedded operating systems for wireless sensor network. Wireless multi-hop sensor networks use battery-operated computing and sensing device. We expect sensor networks to be deployed in an ad hoc fashion, with very high energy constraints. These characteristics of multi-hop wireless sensor networks and applications motivate an operating system that is different from traditional embedded operating system. These days new wireless sensor network embedded operating system come out with some advances compared with previous ones. The analysis is focusing on understanding differences of dominant wireless sensor network OS, such as TinyOS 2.0 with TinyOS 1.x.

• Journal of Biomedical Engineering Research
• /
• v.30 no.3
• /
• pp.185-190
• /
• 2009

Biomedical mobile devices for ubiquitous healthcare consist of biomedical sensors and communication terminal. They have two types of configuration. One is the sensor-network type device using wired or wireless communication with intelligent sensors to acquire biomedical data. The other is the sensor embedded type device, where the data can be acquired directly by itself. There are many examples of sensor network type, such as, fall detection sensor, blood glucose sensor, and ECG sensors networked with commercial PDA phone and commercial phone terminal for ubiquitous healthcare. On the other hand, sensor embedded type mounts blood glucose sensor, accelerometer, and etc. on commercial phone. However, to enable true ubiquitous healthcare, motion sensing is essential, because users go around anywhere and their signals should be measured and monitored, when they are affected by the motion. Therefore, in this paper, two biomedical mobile devices with motion monitoring function were addressed. One is sensor-network type with motion monitoring function, which uses Zigbee communication to measure the ECG, PPG and acceleration. The other is sensor-embedded type with motion monitoring function, which also can measure the data and uses the built-in cellular phone network modem for remote connection. These devices are expected to be useful for ubiquitous healthcare in coming aged society in Korea.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1211-1217
• /
• 2005

Current generation embedded systems are built around only a small number of SOCs, which are again based on general-purpose embedded micro-processors, such as ARM and MIPS. These RISC-based processors are not, however, designed for specific functions such as networking and multimedia processing, whose importances have increased dramatically in recent years. Network devices for small business and home networks, are especially dependent upon such SOCs based on general processors. Except for PHY and MAC layer functions, which are built with hardware, all the network functions are processed by the embedded micro-processor. Enabling technologies such as VDSL and FTTH promise Internet access with a much higher speed, while at the same time explore the limitations of general purpose microprocessors. In this paper we design a network processor, embed it into an SOC for Home gateway, evaluate the performance rigorously, and gauge a possibility for commercialization.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.857-860
• /
• 2017

현재 초보적인 능력을 가진 악기 연주자가 접근할 수 있는 하드웨어, 소프트웨어를 사용해 악기 연주법을 연습할 수 있는 수단은 전무하다. 따라서 본 논문은 악기 연주자가 연습을 하기 위해 사용할 수 있는 음 인식과 악보 정보의 처리, LSTM을 통한 자동 악보 생성의 복합적 기능을 가진 악기 보조 시스템을 제안한다. 또한 본 시스템은 기존의 FFT와 같은 일반적인 Pitch Detection 알고리즘보다 더 우월한 음 인식 성능을 보유한 Autocorrelation 전처리를 거친 LeNet-5 Convolutional Neural Network 모델을 사용하여 음 인식 성능을 높이는 기법을 제안한다. 이 음 인식 모델은 실험 결과 기존의 음 인식 기법보다 최대 약 5.4%의 성능 증가를 이루어냈다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1141-1145
• /
• 2007

Rapid development of high-micro device design and wireless mobile communication technique enables each information instrument and devices to form intelligent network. The discussion of ubiquitous computing that provide information when and where desired is advanced actively. Information collected through ubiquitous sensor network assists it will be able to provide a convenient and accurate service. In this paper, we design and implement system which shows in realtime through TFT/LCD display device sensing data transmitted in embedded system instead of host pc.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.6
• /
• pp.299-305
• /
• 2020

We have developed a scheduler that additionally consider network performance by extending the Kubernetes developed to manage lots of containers in cloud computing nodes. The network delay adapt characteristics of the compute nodes were learned during server operation and the learned results were utilized to develop placement algorithm by considering the existing measurement units, CPU, memory, and volume together, and it was confirmed that the low delay network service was provided through placement algorithm.