• 연구논문집
• /
• 통권29호
• /
• pp.185-194
• /
• 1999

The shape and thickness distribution according to the pressure-time curve were carried out using the FEM and experiment. Also, mechanical properties were investigated. The square cup parts have been formed with pressure-time curve generated by result of analysis. The tensile strength and elongation have been investigated according to applied pressure conditions using the tensile test specimen obtained from the superplastic formed cup. We can use to predict the shape of formed part under the applied pressure using the FEM analysis. In the case of optimum pressure condition, the thickness distribution and mechanical properties were improved. From this study, we can find the important of optimum pressure-time condition. We have investigated about the forming of airplane part and fuel tank for motorcycle. If the applied load used in boundary conditions was appropriate, the simulation result coincides with the formed part. However, it is very difficult to define the pressure condition in complicated shape. Thus, it is need to develop the optimum pressure condition for superplastic forming.

• 한국의류학회지
• /
• 제27권11호
• /
• pp.1291-1299
• /
• 2003

In order to design the better brassiere in terms of appearance and functions, various parameters of the materials should be considered; in this study, fatigue properties and subjective sensation of wing materials and its relation to the preference for a brassiere was investigated. After the survey of commercially available products, five elastic fabrics such as cotton, Modal, polyester, nylon, and Tactel, all of which contain 10% polyurethane, were chosen as specimens. Fabric growth were determined to evaluate fatigue properties. Qmax was determined to evaluate the warm-cool feeling. For the sensory test, semantic differential scale which contains 15 adjectives were developed. Fatigue properties were very similar at the 20% elongation irrespective of the duration of tension, but at 40% and 100% elongation, man made fabric showed less growth than cellulose fabrics. The factor analysis showed four factors such as sense of warmth, smoothness, weight and elasticity. Preference of the specimens was ranked in the order of Tactel>Modal>cotton>nylon>polyester.

• 한국잠사곤충학회지
• /
• 11호
• /
• pp.73-80
• /
• 1970

This study was carried out in order to investigate the correlation among test items of export raw silk. The results obtained from the study are summarized as follows. 1. The highest correlation was between evenness and low evenness in case of the filaments made of autumn cocoons and the coefficient of correlation was 0.854. 2. Among following items, viz.; evenness and cleanness, neatness and low neatness and elongation and cohesion, the correlation phisically was not acknowledged, but the coefficients of correlation were high figures. 3. Poor correlation existed between following items, viz.; size deviation and maximum deviation, evenness and low evenness, neatness and low neatness, cleanness and low neatness. 4. It is considered that the high correlation exists between tenacity and elongation, but in this study the correlation existed among some items. 5. In this study it is a new fact that the correlation between neatness and cohesion as well as low neatness and tenacity existed enough highly. 6. As a conclusion the independence of ten items tested at present was acknowledged.

• 한국환경과학회지
• /
• 제14권3호
• /
• pp.359-366
• /
• 2005

Starch was crosslinked with epichlorohydrin. Crosslinked starch-filled waterborne acrylate (CSWAC) films were prepared by blending this crosslinked starch with waterborne acrylate. The thermal and mechanical properties of these films were investigated by thermogravimetric analysis (TGA), tensile strength and elongation test. The biodegradability was also studied by determination of reduced sugar products after enzymatic hydrolysis and the surface morphology was investigated by scanning electron microscopy (SEM). The CSW AC film showed significantly higher tensile strength and elongation than those of starch-filled waterbonre acrylate (SWAC). The biodegradability of this film was higher than that of native starch-filled acrylate film, and was increased by the addition of crosslinked starch to the acrylate film.

• 대한가정학회지
• /
• 제25권4호
• /
• pp.1-8
• /
• 1987

The effects of Aspergillus niger H-18(AN) and A.fumigatus E-29(AF) on the deterioration of test materials were examined. 1. When the fungi were inoculated to the cotton fibers placed on Czapeck agar, malt extract agar, and potato agar, they grew best on potato agar which in that context was chosen as a basal medium for deterioration studies. The tensile strength of ontton fiber on which AN was grown for 30 days decreased by 33.9% with a concommitant increase in elongation by 43.1%. 2. Cotton fabric lost the weight by 1.35%, when inoculated with AN while it lost the weight by 0.86% when inoculated with AF. 3. When AN and AF were inoculated separately on cotton fibers, tensile strength decreased by 52.8% and 43.3%, respectively, with concommitant increases in elongation by 34.2% and 29.4%, respectively. 4. The cotton was damaged more severely by AN than AF, when they were observed by scanning electron microscope.

• Journal of Microbiology and Biotechnology
• /
• 제7권1호
• /
• pp.13-20
• /
• 1997

Plant growth-promoting Psudomonas fluorescens GL20 was isolated from a ginseng rhizosphere on chrome azurol Sagar. P. fluorescens GL20 produced a large amount of hydoxamate siderophore in an iron-deficient medium. The siderophore showed significantly high specific activity of 20.2 unit. Using an in vitro antifungal test, P. fluorescens GL20 considerably suppressed growth of phytopathogenic fungus Fusarium solani, inhibiting spore germination and germ tube elongation. In pot trials of kidney beans with P. fluorescens GL20, disease incidence was remarkably reduced up to $68{\%}$ compared with that of F. solani alone, and plant growth was also increased nearly 1.6 fold as compared to that of the untreated control, promoting elongation and development of the roots. These results indicate that the plant growth-promoting activity of P. fluorescens GL20 can play an important role in biological control of soil-borne plant disease in a rhizosphere, enhancing the growth of plants.

• 한국주조공학회지
• /
• 제24권2호
• /
• pp.79-84
• /
• 2004

In this study, the electromagnetic vibration is adopted for modifying eutectic Si phase and reducing its size. The higher the current density and frequency of electromagnetic vibration(EMV), the finer the size of eutectic Si phase. The tensile strength and elongation of EMVed alloy were highly improved. Measured twin probability of EMVed alloy at a frequency of 1000 Hz was approximately six times as high as that of the normal alloy. The mechanism for the increase in twin density due to EMV during solidification could be supposed from the fact that the preferential growth along <112> in silicon was suppressed by preventing Si atom from attaching to the growing interface of Si phase and by changing the solid/liquid interfacial energy of silicon. According to the result of UTS test, because of modification of eutectic Si, UTS and elongation are highly increased.

• Ecology and Resilient Infrastructure
• /
• 제5권1호
• /
• pp.1-10
• /
• 2018

We examined the effect of simultaneous application of phosphorus (P) and iron (Fe) on the phytotoxicity of lettuce in arsenic (As) contaminated soil using response surface methodology (RSM). To stabilize As and supply nutrient into soil, Fe and P were treated, respectively. Water soluble As and P was decreased by Fe application but increased by P application. Through phytotoxicity test, the result showed that only the addition of P affected lettuce root elongation even though both P and Fe were added. The correlation coefficients between root elongation and other indices indicated that the As content in the roots seemed to be the main reason that root growth was impeded. We could verify that the former result was not a passing phenomenon and Fe was necessarily needed to protect secondary pollution by exclusive usage of P fertilizer.

• 한국해양공학회지
• /
• 제18권2호
• /
• pp.64-69
• /
• 2004

The characteristics of the probability distribution for mechanical properties, e.g. tensile strength, reduction of area, and elongation, for STS304 stainless steel in elevated temperature are investigated. Tensile test is performed by constant crosshead speed controls with 1mm/min. The probability distribution function of measured mechanical properties seems to follow $\alpha$ 3-parameter Weibull, and shows a slight dependence on the temperature. When the temperature is raised, the shape parameter a is increased, but both the scale parameter $\beta$ and location parameter v are decreased.

• 한국응용과학기술학회지
• /
• 제39권6호
• /
• pp.924-931
• /
• 2022

Undenatured castor oil and trimethylolpropane (TMP) were used to obtain bio-based water-based polyurethane. Isophorone diisocyanate (IPDI) was incorporated into the formulation to obtain a transparent film, and ethylenediamine (EDA) was used for chain extension. In order to measure the change in physical properties according to the contents of castor oil and TMP, each tensile strength, elongation, and abrasion resistance test was conducted. As the contents of castor oil and TMP increased, the tensile strength increased, the elongation decreased, and the surface hardened strongly as the respective contents increased.