• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.2
• /
• pp.92-100
• /
• 2005

This study was conducted to find suitable methods for screening organic resources useful for compost. Twenty-seven industrial and domestic sludges were collected from various cities and industrial areas. Contents of organic matters in the sludges were in the range of 79.3-98.0%, and the contents were much higher than the regulation level (60%) for raw materials of compost. Contents of total nitrogen were in the range of 0.8-2.6%. Contents of Fe and Al were very high. Content of HEM was highest in textile sludge ($257mg\;kg^{-1}$) and the contents in the others were in the range of $12.6-90.3mg\;kg^{-1}$. Content of PAHs was lowest in food sludge ($739.1{\mu}g\;kg^{-1}$ and pulp-mill sludge had the highest PAHs content ($3461.8{\mu}g\;kg^{-1}$). $Microtox^{(R)}$ $EC_{50}$ values were higher in the sludges which were classified as a possible material in composting after analysis and investigation. Lettuce root elongation and $EC_{50}$ values were relatively lower in pulp-mill sludge, sewage sludge 3 (Large city), food sludge and leather sludge. Therefore, mineral nutrients, heavy metals, organic compounds (HEM, PAHs, PCBs), and bioassay ($Microtox^{(R)}$ $EC_{50}$, Relative root elongation test) are recommended to be included in the screening system of raw material of compost in addition to the current regulation with organic matter and 8 heavy metals.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.1
• /
• pp.47-51
• /
• 2016

Purpose By ingestion of 18F-FDG of kidney of PET/CT during the inspection, if additional examination is required, depending on whether you want to water intake, we want to confirm a change in the rate of decrease of F-18 FDG of the kidney. Materials and Methods The 80 patients without kidney disease were performed PET/CT examination. Device was analyzed after setting the kidney to a three-dimensional region of interest. In patients require additional examination, and inspection after 30 minutes, a PET/CT torso examination after the water of the 500 cc ingested at a time. After the addition of both water intake group and no hydration group of kidney of SUV, it was compared with PET/CT torso scan. Results High and low of the kidney SUV did not show a significant difference in the rate of decrease. Reduction rates of background (BKG) of additional examination was 2.8% and reduction rates of SUV was 49.7% (Hydration) : -6.8% (No hydration), so did show a significant difference. In the image blind test, the average point score of hydration and no hydration was 34.25 : 17.25. Conclusion An undercurrent of 18F-FDG in the kidney at the time of torso examination, it was confirmed that the reduction rate after the addition of water intake is high. It is considered that can be expected to improve the quality of an image due to a decrease in elongation through the kidneys examination with additional fluid intake as needed intake.

• Culinary science and hospitality research
• /
• v.18 no.1
• /
• pp.27-39
• /
• 2012

This study was conducted to examine the characteristics of bread quality as per addition rate of citrus mandarin peel powder since interests and concerns about healthy functional food have been increased in contemporary society. The result of mixogram from Mixograph showed that dough added with 3% citrus mandarin peel powder was suitable for baking quality. Stickiness of dough was decreased with addition of citrus mandarin peel powder. Compared with the controlled group, fermentation rate was decreased as the level of citrus mandarin peel powder increased while pH levels of dough and bread were significantly decreased. The TPA analysis showed that the hardness and adhesiveness levels increased as the level of citrus mandarin peel powder increased whereas springiness, cohesiveness and chewiness became decreased. Crumb fineness and elongation became higher as seen from the result of crumbScan. Volume and specific volume was decreased. The result of preference test presented that crumb color, texture, flavor and taste were the highest in the M3, which showed highest point in overall preference. In conclusion, M3 was the best in preference, taste and texture, thus determined as the optimal rate in association with the addition of citrus mandarin peel powder.

• Journal of Life Science
• /
• v.12 no.6
• /
• pp.708-714
• /
• 2002

A new leaf blight was found on the perilla leaves at the major perilla-cultivating areas such as Kangdong in Busan and Miryang in Kyungnam province. Symptoms of the disease initially appeared on the edge of perilla leaves showing black necrosis and drying, and the infected leaves were finally fell down. The SD1 isolate showing strong pathogenicity and forming abundant conidial spores on the diseased lesions was isolated. Among the tested media, mycelial growth was abundant on PDA (Potato Dextrose Agar) medium at $25^{\circ}C$ under dark condition, but conidial formation was greater on V8A (V-8 juice A8ar) medium than that on PDA medium. Optimal temperatures for mycelial growth and conidial formation on PDA medium were respectively $25^{\circ}C$ and 3$0^{\circ}C$. The rate of conidial germination and the elongation of germ tube were more effective in 10% tomato juice than those in PDB (Potato Dextrose Broth) and sterile water. In 10% tomato juice, the rate of conidial germination and the length of germ tube were 100% after incubation for 24k and 535.2${\mu}{\textrm}{m}$ after incubation for 36hr, respectively. According to the result of pathogenicity, it revealed that conidial suspention with 10% tomato juice was the most effective for pathogenicity test showing as 100% of disease incidence, and the symptoms caused by artificial inoculum were same as those of naturally infected perilla. In this study, the SD1 isolate according to the results of morphological characteristics, the incubation characteristics and pathogenicity was firstly identified A. alternata, and named as leaf blight of perilla.

• Journal of Sericultural and Entomological Science
• /
• v.34 no.2
• /
• pp.41-51
• /
• 1992

In this thesis, both soap and enzymatic degumming method were adopted and the optimum degumming conditions were obtained. Difference between the two degumming methods in silk fiber state was investigated and analyzed on the basis of the results of physical testings, polarizing microscopy, scanning electron microscopy, viscosity measurement, (${\alpha}$＋$\varepsilon$) amino group contents measurement, birefringence measurement, amino acid analysis, thermal analysis, infrared spectroscopy and x-ray diffraction analysis. The results obtained were summarized as follows; Physical test results of the degummed silk fiber showed that the tenacity and the elongation of enzymatic degummed silk fiber were lower than those of soap degummed fiber. But SEM observation and amino acid analysis showed almost the same tendency in the two degumming methods. The viscosity of enzymatic degummed silk fiber was lower than that of soap degummed fiber, but (${\alpha}$＋$\varepsilon$) amino group contents was higher in the enzymatic degummed fiber. It can be suggested that the enzymatic degummed silk fibroin was more degraded than the soap degummed fibroin. The birefringence, endothermic temperature of DSC spectrum, IR crystallinity and X-ray lateral order factor of enzymatic degummed silk fiber were higher than those of soap degummed fiber. It seems that the enzymatic degummed silk fiber has the higher crystallinity than that of soap degummed one according to the above results. However, it can be inferred that these differences between soap and enzymatic degummed fiber would be lessened if pretreatment and aftertreatment were included in the enzymatic degumming process.

• Research in Plant Disease
• /
• v.10 no.3
• /
• pp.159-166
• /
• 2004

This study were carried out to identify pathogens and determine the seasonal occurrence and chemical control of safflower (Carthamus tinctorius) diseases from 2000 to 2002 in Gyengbuk province, Korea. Major diseases of safflower were, anthracnose caused by Colletotricum acutatum in open field, and gray mold by Botrytis cinerea in rain sheltered plastic house. Other diseases occurred were powdery mildew caused by Sphaerotheca fuliginea, collar rot by Sclerotium rolfsii, leaf spot by Alternaria carthami and A. alternata, rust by Puccinia carthami, root-rot and stem-rot by Phytophthora cactorum, root-rot and wilt by Fusarium oxysporum and damping-off by Pythium ultimum. Seasonal occurrence of anthracnose on safflower has begun from late April, and increased until harvesting, especially rapid increased after rainfall during stem elongation season that is from May to June. In open fields, maximum incidence of anthracnose was 67 ％ in late July. But in rain-sheltered plastic house, it was very low, about 5％ in July. Gray mold caused by Botrytis cinerea was most important disease in rain-sheltered plastic house cultivation. Maximum incidence of gray mold on floral head was 27.4％, whereas other diseases occurred below 1 ％. In the test of the chemical control of the safflower anthracnose, metiram WP, carbendazim$.$kasugamycin WP and iminoctadintris$.$thiram WP were the highest controlling chemicals. In chemical control of gray mold, iminoctadintris$.$thiram WP, fluazinam WP and iprodion WP showed highest controlling effects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.692-696
• /
• 2017

The shape of press components is becoming increasingly complex due to customer demands, process shortening and cost savings. In addition, the stability of the pressing process frequently varies during mass production due to the influence of many factors. In order to ensure the process stability, it is necessary to establish a process in which reproducibility is realized in tolerance, which is sufficient for advance study of shape, material, press, mold and lubrication. However, unforeseen changes in process parameters cause disruptions in production line shutdowns and production planning. In this paper, we introduce a method to monitor a real time process by applying a sensor to a press mold. A non-contact type sensor for measuring the flow of a sheet material and an example of an experiment using the optical sensor which is highly applicable to mass production are presented. An optical sensor was installed in a cylindrical drawing mold to test its potential application while changing the material, blank holder force, and drawing ratio. We also quantitatively determined that the flow of other sheet materials was quantified locally using a square drawing die and that the measured value was always smaller than the drawing depth due to the material elongation. Finally, we propose a field that can be used by attaching the sensor to the press mold. We hope that the consequent cost reduction will contribute to increasing global mold competitiveness.

• Elastomers and Composites
• /
• v.46 no.4
• /
• pp.335-342
• /
• 2011

The virgin and recycled polyethylene composites with various ratio of fly ash were manufactured by using a fully intermeshing co-rotating twin screw extruder for the reuse of fly ash from power plant and post-consumed polyethylene. Fly ash were blended with virgin HDPE and recycled polyethylene at the weight fraction of 0 to 40 wt.%. Mechanical properties such as yield strength, abrasion resistance, and slow crack resistance were measured with ISO and ASTM standards. The experimental results for the various composites showed that the elongation at break and the yield stress of the composites decreased with increasing fly ash contents. Generally, the abrasion resistance of PEs decreased with increasing sandpaper grits but the abrasion resistance of the composites increased with fly ash content at finer abrasive surface. The slow crack growth resistance of virgin HDPE, recycled JRPE and the JRPE composite showed higher slow crack growth resistance up to 50% of load at notch depth of 20% and 30%, but KRPE and the KRPE composite showed much lower resistance than virgin HDPE, JRPE and the JRPE composite. Time to break, measured with NCLS test method, of all PEs and the composites satisfies the regulation of Korean Industrial Specification for sewer pipe and support application.

• Journal of Korea Foresty Energy
• /
• v.25 no.2
• /
• pp.9-15
• /
• 2006

The quality of wood is largely depend on the characteristics of xylem tissue and their variation. They may include tracheid length, microfibril angle, distribution and amount of resin canal, as well as specific gravity as indicator of material properties. In this study, variation of these elements between and within 30 superior families of Pinus densifloa in progeny test forest were examined and the results are as follows; In terms of elongation ratio of tracheid length which is less than 1%, the sample tree showed a transition to matured wood after 13 years particularly in Kangwon 25, 30, 90, 56 and Chungnam 4 families. The average specific gravity were from 0.35 to 0.49, and differences between the families were significant. Number of transverse resin canal per unit area were also found to be significant between the families. The microfibril angles measured at 15th ring number ranged from 0.9 degree to 28.6 degree. More studies are necessary to tell whether these variation is inherited by genetic or individual characteristic. However it would be desirable that these elements be considered as key elements in the early stage of selection process of superior tree to ensure good quality of wood production in future.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.1 s.34
• /
• pp.47-52
• /
• 2005

Worldwide movement for prohibition of Pb usage drives imminent implementation of Pb-free solders in microelectronic packaging industry. Reliability information of Pb-free solders has not been completely constructed yet. One of the potential reliability concerns of Pb-free solders is allotropic transformation of Sn known as tin pest. Volume increase during the formation of tin pest could deteriorate the reliability of solder joints. It was also reported that the addition of soluble elements (i.e. Pb, Bi, and Sb) into Sn can effectively suppress the tin pest. However, the mechanical properties of the tin pest resistant alloys have not been studied in detail. In this study, lap shear creep test was conducted with Sn and Sn-0.7Cu based solder alloys doped with minor amount of Bi or Sb. Shear strain rates of the alloy were generally higher than those of Sn-3.5Ag based alloys. Rupture strains and corresponding Monkman- Grant products were largest for Sn-0.5Bi alloy and smallest for Sn-0.7Cu-0.5Sb alloy. Rupture surface Sn-0.5Bi alloy showed highly elongated $\beta$-Sn globules necked to rupture by shear stresses, while elongation of $\beta$-Sn globules of Sn-0.7Cu-0.5Sb alloy was relatively smaller.