• Elastomers and Composites
• /
• 제46권2호
• /
• pp.125-131
• /
• 2011

일정한 길이로 분쇄한 케냐프섬유를 일정한 비율로 PP수지에 복합화하여 섬유의 함량에 따른 기계적특성을 조사하였다. 케냐프 섬유의 함량이 증가할수록 인장강도, 굴곡탄성률, 충격강도, 비중, 열변형온도가 증가하는 경향을 나타내었으나 신장률, 굴곡강도, 용융유동지수는 감소하는 경향을 나타내었다. 기계적물성증가의 원인은 섬유와 PP간의 계면접촉면적의 증가와 섬유간의 연결간섭으로 고찰되었다. 케냐프섬유내에 존재하는 증발성추출물질이 PP와 의 계면접착에 있어서 감소에 영향을 미치는 것으로 고려된다.

• 한국잠사곤충학회지
• /
• 제40권2호
• /
• pp.150-157
• /
• 1998

This study was carried out to define the effects of anti-juvenile hormone analogue(AJH) treatment at different silkworm larval stages on some silk filament properties. It was revealed that the treatments at the 1st and 2nd days of the 3rd instar as well as the 1st day of the 4th instar resulted to trimolters induction without lethal effect. The trimolters induced by treatment at the 1st day of the 4th instar showed the shortest larval duration and the lowest single cocoon weight, cocoon shell ratio, cocoon size, single filament length and denier of filament compared with those of the control, while the trimolters induced by the 3rd-instar treatment showed intermediate values. All treatments showed no significant differences from the aspect fo degumming ratio, elongation rate and crystallinity index of fibroin. However the silk filament obtained from the treatment at the 1st day of the 4th instar showed the highest tenacity which was revealed to be related to the better uniformity of filament by the means of microscopic photographing. FT-IR spectroscopy of the silk fibroin showed a sharp and strong peak at the position of 794.72 cm-1 in all AJH-treated samples regardless of trimolters induction, which was absent in control.

• Fibers and Polymers
• /
• 제6권2호
• /
• pp.95-102
• /
• 2005

Sodium cellulose carbonate (CC-Na) dissolved in $8.5\;wt\%$ NaOH/ZnO (100/2-3, w/w) aqueous solution was spun into some acidic coagulant systems. Diameter of regenerated cellulose fibers obtained was in the range of $15-50\;{\mu}m$. Serrated or circular cross sectional views were obtained by controlling salt concentration or acidity in the acid/salt/water coagulant systems. Velocity ratio of take-up to spinning was controlled up to 4/1 with increasing spinning velocity from 5 to 40 m/min. Skin structure of was developed at lower acidity or higher concentration of coagulants. Fineness, tenacity and elongation of the regenerated cellulose fibers were in the range of 1.5-27 denier, 1.2-2.2 g/d, and $8-11.3\;\%$, respectively. All of CC-Na and cellulose fibers spun from CC-Na exhibited cellulose II crystalline structure. Crystallinity index was increased with increasing take-up speed.

• 폴리머
• /
• 제39권2호
• /
• pp.200-209
• /
• 2015

In this study, the influence of dilauroyl peroxide on mechanical and thermal properties of different polypropylene (PP) matrices was investigated. Polypropylene matrices, different molecular weight isotactic PP containing 0.01, 0.02, 0.04, 0.06, 0.08, and 0.1 wt% of dilauroyl peroxide (DLP) were prepared by using a single-screw extruder. The effect of the visbreaking agent (DLP) on mechanical, physical, thermal and morphological properties of different molecular weight PP had been studied. Mechanical properties (tensile strength at break point, at yield and elongation at break point), melt flow index (MFI), scanning electron microscope (SEM) and differential scanning calorimetric (DSC) analyses of these matrices were examined. Melting ($T_m$) and crystallization ($T_c$) temperatures, crystallinity ratio (%) and enthalpies were determined. The microstructure of isotactic polypropylene matrix was investigated by scanning electron microscopy (SEM). From SEM analysis, it was observed that the surface disorder increased by the increasing amount of DLP. As a result of DSC analyses, the crystallinity ratio of the PP matrices has varied between 1.64-7.27%. Mechanical properties of the matrices have been improved. Particularly, the mechanical tests of PP have given interesting results when compounded with 0.06-0.08 wt% dilauroyl peroxide (DLP). Mechanical properties and thermal decomposition processes were all changed by increasing the amount of DLP in the matrix structure.

• Elastomers and Composites
• /
• 제38권2호
• /
• pp.122-127
• /
• 2003

환경에 유해한 PVC 재질의 바닥재나 시트를 대체하기 위하여 styrene-ethylene-butadiene-styrene(SEBS)과 같은 열가소성고무를 사용하고 polypropylene(PP) 등의 폴리머와 오일, 무기물 및 안정제 등을 혼합하여 내충격성 또는 탄성이 우수한 새로운 소재를 개발하기 위한 컴파운딩 연구를 진행하였다. SEBS와 오일의 혼합물에서 경도는 오일의 함량이 증가함에 따라서 선형적으로 감소하였고, SEBS/oil/PP의 조성물에서는 PP의 함량이 증가하면 인장강도는 선형적으로 증가하는 반면, 신율은 PP가 50phr상에서는 거의 영향이 없었다. PVC 소재의 바닥재나 시트를 대체 사용하기 위한 실질적인 SEBS 혼합물의 조성물에서도 인장 및 인열강도, 그리고 경도는 PP 함량에 비례하여 증가하는 것으로 나타났으나, 용융지수는 PP 함량이 증가하면 감소하는 것으로 나타났다.

• 폴리머
• /
• 제37권5호
• /
• pp.613-617
• /
• 2013

나노입자크기의 케냐프섬유를 폴리프로필렌에 첨가하였을 시, 복합소재의 물성변화를 관찰하였다. 천연크기의 케냐프섬유를 나노입자크기의 케냐프섬유로 대체하였을 시, 그 복합소재의 인장강도, 휨강도, 충격강도, 열변형온도가 증가한 반면에, 용융지수, 연신율(%), 충격강도 등이 감소하였다. 이는 나노입자크기의 케냐프섬유가 폴리프로필렌과 접촉하는 표면적의 증가와 섬유표면에 존재하는 휘발성 추출물질 등의 불순물의 감소에 따른 것으로 판단된다.

• 농업생명과학연구
• /
• 제50권5호
• /
• pp.1-9
• /
• 2016

Plant growth and development strongly influenced by light quantity and its spectral composition. Young tomato plants were cultivated in growth cabinets under artificial light provided by red and blue light emitting diodes(LEDs) during 12 hours, then plants were exposed to monochromatic ultraviolet, blue, green and red lights as an end-of-day(EOD) treatment during 4 hours to study their effect on plant growth parameters. EOD lighting from various LEDs increased total fresh and dry weights as well as assimilation area compared to those in control. Blue light increased stem height, internode length and stem diameter. Monochromatic UV-A light reduced stem elongation, highly increased stomatal conductance. Compactness and health index of young tomato plants were increased in UV-A and red light treatments.

• Corrosion Science and Technology
• /
• 제22권5호
• /
• pp.341-350
• /
• 2023

In the present study, effects of a thin Zn-flash coating on hydrogen evolution, infusion, and embrittlement of advanced high strength steel during electro-galvanizing were examined. The electrochemical permeation technique in conjunction with impedance spectroscopy was employed under applied cathodic polarization. Moreover, a slow-strain rate test was conducted to evaluate loss of elongation (i.e., indicative of hydrogen embrittlement (HE)) and examine fracture surfaces. Results showed that the presence of a thin Zn-flash coating, even when it was not distributed uniformly, reduced hydrogen evolution rate and substantially impeded infusion of hydrogen into the steel substrate. This was primarily due to a hydrogen overvoltage on Zn coating and trapping of hydrogen at the interface of Zn coating/flash coating/steel substrate. Consequently, the sample with flash coating had a smaller HE index than the sample without flash coating. These results suggest that a thin Zn-flash coating could be an effective technical strategy for mitigating HE in advanced high-strength steels.

• 한국수산과학회지
• /
• 제34권4호
• /
• pp.320-326
• /
• 2001

어분단백질의 이용성을 높이기 위한 가식성 혹은 생분해성 필름가공을 목적으로 알칼리 처리하여 제조된 FMPI의 물성과 이물성과 ester 화합물의 필름 투과율과 인장강도에 미치는 영향을 조사한 결과는 다음과 같다. 어분으로부터 알칼리처리하고 추출조건을 달리하여 제조된 FMPI의 추출량은 추출시간이 증가함에 따라 증가하였다. FMPI의 소수성은 추출시간 1시간일 때 가장 높게 나타났다가 그 이상 추출시간이 경과함에 따라 감소하였다 유화활성은 추출시간이 5시간까지 증가함에 따라 급격한 증가를 보였으며, 유화안정성은 추출시간 2시간까지 추출시간의 증가에 따라 급격한 감소를 보여 유화활성과 상반된 결과를 나타내었다. 점도는 pH가 2일 때 가장 높게 나타났고 pH가 4일 때 가장 점도가 낮게 나타났다. 첨가하는 가소제의 농도가 증가할수록 필름의 ethyl acetate의 투과도는 증가하였다. 가소제의 종류별에 따른 ethyl acetate의 투과도는 polyethylene glycol, glycerol 및 sorbitol 첨가 필름 순으로 높게 나타났으며, ester 화합물 중에서는 ethyl formate의 투과속도가 가장 높았다. 온도가 증가함에 따라 ethyl acetate의 필름 투과속도는 증가하였다. FHPI의 표면소수성이 증가하면 필름의 인장강도가 증가하였다. 필름의 신장율은 FMPI의 표면소수성보다 가소제의 종류에 더 큰 영향을 받았다.

• Journal of Nutrition and Health
• /
• 제33권2호
• /
• pp.124-133
• /
• 2000

This study evaluated the effects of chronic ethanol consumption and/or taurine supplementation on hepatic total, phospholipid fatty acid composition and the metabolism of rats fed one of three purified liquid diets for 8 weeks. the rats followed either the control diet (CD, ethanol-free and taurine-free diet); ethanol diet (ED, CD+ 50g ethanol/L) or ethanol-taurine diet (ETD, ED+3.75g taurne/L). Chronic ethanol consumption and/or dietary taurine supplementation were associated with altered hepatic total and phospholipid fatty acid composition. compared to the values for the control rats, ED or ETD significantly decreased the percentage of total monounsaturated fatty acids ($\Sigma$MUFA), and increased the percentage of total polyunsaturated fatty acids ($\Sigma$PUFA) of hepatic total lipids(p〈0.01). Percentages of 14:0(P〈0.01) and 16:0(p〈0.001) were sigificantly lower, and those of 18:0(p〈0.01), 20:0(p〈0.001), 20:3$\omega$6(p〈0.01) and 22:4$\omega$6(p〈0.01) in hepatic total fatty acid compositions were oserved in rats fed ETD versus those fed ED or ETD. No significant differences in hepatic total fatty acid compositions were observed in rats fed ETD versus those fed ED. Percentages of 24:0(p〈0.01), 16:1(p〈0.05), 20:1(p〈0.01), 18:2$\omega$6(p〈0.01) and 18:3$\omega$3(p〈0.05) in hepati phospholipids were significantly higher, and those of 14:0(p〈0.01), 16:0(p〈0.001), 20:3$\omega$3(p〈0.05) in hepatic phospholipids were significantly higher, and those of 14:0(p〈0.01), 16:0(p〈0.001), 20:3$\omega$3(p〈0.001), 22:6$\omega$3(p〈0.001) and $\Sigma$$\omega$3(P〈0.001) were significantly lower in rats fed ED or ETD compared to the values for the control rats. The Δ5 desaturation index(20:3$\omega$6⇒20:4$\omega$6) and elongation index (20:5$\omega$3⇒22:5$\omega$3) of hepatic phospholipid index (20:3$\omega$6⇒20:4$\omega$6) and decreased Δ4 desaturation index (22:5$\omega$3⇒22:6$\omega$3) compared to the values for the ED rats. These changes in hepatic fatty acid composition induced by chronic ethanol consumption and/or taurine supplementation might be associated with the modulations of physical properties of the hepatic cell membrane and its sensitivity to peroxidation damage.