• 치과방사선
• /
• 제18권1호
• /
• pp.193-201
• /
• 1988

The purpose of this study was to investigate the variation in the length and shape of styloid processes and the relationships between the elongated styloid processes and the styloid process syndrome, using panoramic radiogrpahs and questionaires. The subjects were 342 patients consisted of 170 males and 172 females aged from 11 to 78 years, not showing facial asymmetry, who visited infirmary of dental college of Yonsei University. Also, the accuracy was determined for measuring the length of styloid processes from panoramic radiographs, using dried skulls. The results were as follows: 1. The length of styloid processes was magnified approximately 1.1 times, but there was no statistically significant differencies in the magnification rate of length between right and left side. 2. The mean radiographic length of styloid processes was 29.72±7.92㎜ in males, 27.93±6.69㎜ in females, and 28.82±7.37㎜ in total. And elongated styloid process (>30㎜) was seen in 31.3% of total subjects. 3. The growth in the length of styloid processes was completed in the third decade. 4. The most common shape of styloid processes was straight followed by segmented and bent form. The incidence of segmentation was reduced with increasing age. 5. The 74% of subjects with elongated styloid process (>30㎜) showed symptoms of the styloid process syndrome. The most frequent symptom was headache followed by discomfort in the neck when turning the head from left to right, tinnitus or earache, vague facial pain, discomfort or pain when swallowing, feeling that an object is caught in throat.

• 한국대기환경학회지
• /
• 제26권6호
• /
• pp.683-689
• /
• 2010

Reforming of methane with carbon dioxide has been carried out using a bipolar pulse driven elongated arc reactor operating at atmospheric pressure and non-equilibrium regime. This plasma reactor is driven by two kinds of power supply, characterized by different voltage-current characteristics under the same operating power and frequency. Varying the $CO_2/CH_4$ ratio and the discharge power, the conversion rate, yield, and reforming efficiency for the two power supplies are investigated in conjunction with the static and dynamic behaviors of voltage and current. It is found that not only the values of voltage and current but also their shapes give an influence on the reforming performances. Finally, a better electrical operation regime for the efficient plasma reforming is proposed based on the relationship between the voltage-current characteristics and the reforming performance.

• 한국수산과학회지
• /
• 제43권5호
• /
• pp.482-488
• /
• 2010

Three specimens of Cynoglossidae larvae were collected from the southern Korean Sea in May and August of 2009, and were identified using morphological and molecular analysis. Specimens were divided into two groups based on the number of elongated dorsal fin rays on the top of the head: Cynoglossidae sp. A was defined as having two elongated dorsal fin rays, while Cynoglossidae sp. B possessed a single elongated dorsal fin ray. One specimen of Cynoglossidae sp. A, a post-larva with a notochord length (NL) of 5.8 mm was thought to be a Cynoglossus joyneri larva based on the presence of 115 dorsal pterogiophores, 85 anal pterogiophores, and 50 myomeres. Two specimens of Cynoglossidae sp. B, a 4.1 mm NL larva and a 11.3 mm NL juvenile, were thought to be Cynoglossus abbreviatus based on the presence of yolk in the former and 133 dorsal fin rays, 105 anal fin rays, and 63 myomeres in the latter. To test this morphology-based identification, molecular analysis was conducted using 419-422 bp of mitochondrial DNA 16S rRNA. Cynoglossidae sp. A was clearly matched to a Cynoglossus joyneri adult (d=0.000) and Cynoglossidae sp. B clustered closely with Cynoglossus abbreviatus adults (d=0.002). A neighbor-joining tree supported this robust relationship (bootstrap value=100%). Therefore, these molecular data validate the morphological identification of the two Cynoglossidae larval species.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권2호
• /
• pp.180-183
• /
• 2009

Eagle's syndrome refers to a symptomatic elongation of the styloid process or calcification of the stylohyoid and stylomandibular ligaments that usually accompanies facial and pharyngeal pain, dysphagia, and foreign-body sensation in the throat. Making an accurate diagnosis is difficult as Eagle's syndrome can be accompanied with referred pain to various areas of head and neck. Treatment options for Eagle's syndrome include non-surgical and surgical methods. The surest and the most effective method for relieving the symptom is surgical removal or reduction of the elongated styloid process. The present study reports two cases of female whom were diagnosed as "Eagle's syndrome" and whose chief complain was foreign-body sensation and pain in the throat on movement. Surgical removal via transoral approach of the elongated styloid process is a safe surgical option with favorable results compared to extraoral approach.

• 한국습지학회지
• /
• 제11권1호
• /
• pp.1-13
• /
• 2009

비대칭형상의 유역에서 이동강우로 인한 유출영향을 운동파이론을 적용하여 분석하였다. 이동강우 분포형은 균등분포형, 전진형, 지연형 및 중앙집중형을 사용하였고, 비대칭유역형상은 정사각형, 신장형, 및 장방형유역에 대하여 분석하였다. 다양한 이동속도를 가진 이동강우가 비대칭유역의 상류, 하류 및 횡방향으로 이동할 때 유출수문곡선을 모의하여 그 특성을 대칭유역과 비교분석하였다. 하류방향에 대하여 신장형유역에서 대칭과 비대칭유역의 첨두유량 차이가 가장 작은 반면에 장방형유역에서 가장 큰 차이를 보여주고 있으며, 이것은 상류방향에서도 동일하게 나타났다. 횡방향에서는 대칭, 좌비대칭 및 우비대칭유역 모두 지연형 강우에서 가장 큰 첨두유량을 그리고 전진형강우에서 가장 작은 첨두유량을 보이고 있다. 첨두시간은 장방형유역에서 가장 길게 나타나고 신장형유역에서 가장 짧게 나타났다.

• 식물분류학회지
• /
• 제48권3호
• /
• pp.185-194
• /
• 2018

A comparative floral morphological study of 19 taxa in Persicaria sect. Cephalophilon with four taxa related to Koenigia was conducted to evaluate the taxonomic implications. The flowers of P. sect. Cephalophilon have (four-)five-lobed tepals; five, six, or eight stamens, and one pistil with two or three styles. The size range of each floral characteristic varies according to the taxa; generally P. humilis, P. glacialis var. glacialis and Koenigia taxa have rather small floral sizes. The connate degrees of the tepal lobes and styles also vary. The tepal epidermis consists of elongated rectangular cells with variation of the anticlinal cell walls (ACWs). Two types of glandular trichomes are found. The peltate glandular trichome (PT) was observed in nearly all of the studied taxa. The PT was consistently distributed on the outer tepal of P. sect. Cephalophilon, while Koenigia taxa and P. glacialis var. glacialis had this type of trichome on both sides of the tepal. P. criopolitana had only long-stalked pilate-glandular trichomes (LT) on the outer tepal. The nectary is distributed on the basal part of the inner tepal, with three possible shapes: dome-like, elongated, and disc-like nectary. The nectaries are always accompanied by elongated or spheroidal papillae. Various combinations of floral characters (e.g., the numbers of stamens and styles, the stigma shape, the nectary shape, ACWs, cuticular striation and the trichome type and distribution) of P. sect. Cephalophilon are useful when attempting to recognize the infrasectional levels of P. sect. Cephalophilon recently proposed. Here, we describe the floral characteristics in detail and discuss the taxonomic significance of the floral characters.

• 한국수정란이식학회지
• /
• 제29권4호
• /
• pp.351-359
• /
• 2014

Phasianus colchicus is not only a beautiful bird but also a great value in science and under the threat of endanger. Hence, the aim of this study was to isolate the pheasant male germ cells (mGCs) and then induce them into elongated sperm-like cells in vitro. The mGCs were purified and enriched by a two-step plating method based on the different adherence velocities of mGCs and somatic cells. The percentage of the c-kit positive cells and c-kit negative cells examined by flow cytometry analysis (FCA) was 92.87% and 2.57%, respectively. Subsequently, the mGCs were induced for 48h in DMEM/F12 medium supplemented factors such as retinol acid, testosterone and bovine FSH, followed by 5 weeks in culture. We found that some elongated sperm-like cells appeared initially in vitro under inducement of stimulated factors. The elongated sperm-like cells showed in the expression of changed morphology and post-transcriptional marker such as spermatid associated (SPERT), spermatid perinuclear RNA binding protein (STRBP), round spermatid basic protein 1 (RSBN1) and SPER1L. Moreover, in DNA content identified assay, induced cells showed that the 1C DNA population markedly increased in differentiated group but it was not change in undifferentiated group. Successful in vitro differentiation of pheasant testicular germline cells into spermatids appears to offer extremely attractive potential for the conservation of endangered birds and treatment of male infertility.

• 대한금속재료학회지
• /
• 제50권12호
• /
• pp.931-937
• /
• 2012

The microstructure of Cu-15 wt%Ag composites fabricated by equal channel angular pressing (ECAP) with intermediate heat treatment at $320^{\circ}C$ was investigated by transmission electron microscopy (TEM) observations. Ag precipitates with a thickness of 20-40 nm were observed in the eutectic region of the Cu-15 wt%Ag composite solution treated at $700^{\circ}C$ before ECAP. The Cu matrix and Ag precipitates had a cube on cube orientation relationship. ECAPed composites exhibited ultrafine-grained microstructures with the shape and distribution dependent on the processing routes. For route A in which the sample was pressed without rotation between each pass, the Cu and Ag grains were elongated along the shear direction and many micro-twins were observed in elongated Cu grains as well as in Ag filaments. The steps were observed on coherent twin boundaries in Cu grains. For route Bc in which the sample was rotated by 90 degrees after each pass, a subgrain structure with misorientation of 2-4 degree by fragmentation of the large Cu grains were observed. For route C in which the sample was rotated by 180 degrees after each pass, the microstructure was similar to that of the route A sample. However, the thickness of the elongated grains along the shear direction was wider than that of the route A sample and the twin density was lower than the route A sample. It was found that more microtwins were formed in ECAPed Cu-15 wt%Ag than in the drawn sample. Grain boundaries were observed in relatively thick and long Ag filaments in Cu-15 wt%Ag ECAPed by route C, indicating the multi-crystalline nature of Ag filaments.

• 대한금속재료학회지
• /
• 제46권12호
• /
• pp.800-808
• /
• 2008

Heat treatment is an important step for tool manufacture, but unavoidably generates dimensional distortion. This study investigated the continuous dimensional change and the anisotropic behavior of STD11 tool steel during austenitizing and tempering heat treatment especially using quenching dilatometer. Dilatometric results represented that the dimensional change along longitudinal direction was larger than that along transverse direction. Anisotropic phase transformation strain was produced in forged STD11 tool steel during heat treatment. Anisotropic dimensional change increased with increasing austenitizing temperature. After tempering, anisotropic distortion was partially reduced. FactSage thermodynamic equilibrium phase simulation and microstructural observation (FE-SEM, TEM) showed that large ($7{\sim}80{\mu}m$) elongated $M_7C_3$ carbides could be formed along rolling direction. The resolution of elongated carbides during austenitizing was found to be related with the change of martensite transformation temperature after heat treatment. Anisotropic size change of STD11 tool steel was mainly attributed to large elongated carbides produced during rolling process. Using dilatometric and metallographic examination, the possible mechanism of the anisotropic size change was also discussed.

• 한국의학물리학회지:의학물리
• /
• 제33권1호
• /
• pp.1-9
• /
• 2022

Purpose: To evaluate the effective volume of the Korea Research Institute of Standards and Science free air chamber (KRISS FAC) L1 used for the primary standard device of the low-energy X-ray air kerma. Methods: The mechanical dimensions were measured using a 3-dimensional coordinate measuring machine (3-d CMM, Model UMM 500, Carl Zeiss). The diameter of the diaphragm was measured by a ring gauge calibrator (Model KRISS-DM1, KRISS). The elongation of the collector length due to electric field distortion was determined from the capacitance measurement of the KRISS FAC considering the result of the finite element method (FEM) analysis using the code QuickField v6.4. Results: The measured length of the collector was 15.8003±0.0014 mm with a 68% confidence level (k=1). The aperture diameter of the diaphragm was 10.0021±0.0002 mm (k=1). The mechanical measurement volume of the KRISS FAC L1 was 1.2415±0.0006 cm³ (k=1). The elongated length of the collector due to the electric field distortion was 0.170±0.021 mm. Considering the elongated length, the effective measurement volume of the KRISS FAC L1 was 1.2548±0.0019 cm³(k=1). Conclusions: The effective volume of the KRISS FAC L1 was determined from the mechanically measured value by adding the elongated volume due to the electric field distortion in the FAC. The effective volume will replace the existing mechanically determined volume in establishing and maintaining the primary standard of the low-energy X-ray.