• Title/Summary/Keyword: Elongated

Search Result 1,035, Processing Time 0.03 seconds

R-Curve Behavior of Silicon Nitride at Elevated Temperatures

  • Sakaguchi, Shuji
    • The Korean Journal of Ceramics
    • /
    • v.4 no.4
    • /
    • pp.331-335
    • /
    • 1998
  • R-curve, of three kinds of silicon nitride-based ceramics were measured, using single edge notched beam (SENB) method at room and at elevated temperatures, up to $1200^{\circ}C$. Stable fraacture was seen on ceramic materials with SENB specimens if the machined notch is deep enough, even though the crack resistance did not increase with crack length. Hot pressed silicon nitride did not show the rising R-curve behavior at room temperature, but it showed some rising at $1000^{\circ}C$ and above. Si3N4 reinforced with SiC whiskers showed no rising behavior at room and elevated temperatures, as it has smaller grain size, compare to the monolithic specimen. Gas pressure sintered silicon nitride had very large and elongated grains, and it showed rising R-curve even at room temperature. However, it showed some creep behavior at $1200^{\circ}C$ and the calculated R-curve on this condition did not show a good result. We cannot apply this technique on this condition for obtaining the R-curve.

  • PDF

Wear Behavior of Silicon Nitride Depending on Gas Pressure Sintering Conditions

  • Kim, Sung-Ho;Lee, Soo-Wohn;Park, Yong-Kap
    • The Korean Journal of Ceramics
    • /
    • v.6 no.3
    • /
    • pp.193-200
    • /
    • 2000
  • Si$_3$N$_4$powder with 2 wt% $Al_2$O$_3$and 6 wt% $Y_2$O$_3$additives was sintered by the gas pressure sintering (GPS) technique. The unlubricated wear behavior depending on sintering conditions such as sintering temperature, pressure, and sintering time was investigated. When the sintering temperature and time increased, the larger elongated grains were formed and the microstructural heterogeneity increased. When sintering pressure increased, grain growth, however, was impeded. Also, the wear properties depended on microstructure and friction coefficient were related to grain size. Based on the experimental results, the wear properties were associated with initial friction coefficients as well as mechanical properties including fracture toughness and flexural strength.

  • PDF

Testicular Development of the Male Lungfish, Protopterus annectens (OWEN) (Pisces: Sarcopterygii) in the Flood Plains of River Niger in Udaba-Ekperi in Nigeria

  • Onyedineke, N.-E.;Otuogbai, T.-O.-S.;Elakhame, L.-A.;Ofoni, C.
    • Journal of Aquaculture
    • /
    • v.14 no.2
    • /
    • pp.73-79
    • /
    • 2001
  • Testicular development of the male African lungfish, Protopterus annectens (Owen) was investigated histologically. The testis was found to be an elongated structure that possessed two distinct portions: an anterior spermatogenic part that was made up of a system of testicular tubules and a posterior vesicular part that invaded the kidney tissue. Spermatogenesis can be divided into five stages; primary spermatogonia, secondary spermatogonia, spermatocyte, spermatids and spermatozoa. Based on the gonadosomatic index (GSI) and histological changes observed, the reproductive cycle can be divided onto four distinct stages: resting and quiescent (December to February), growing (March to June) ripe and spent (July to August) and postspawning (September to November). The GSI was the maximum on July when reproductive cells were mature, ripe and ready for spawning; and the minimum in August after fish spawned.

  • PDF

Crystallization behavior of Amorphous Silicon with Al and Ni (Al과 Ni를 이용한 비정질 실리콘의 결정화 거동)

  • Kwon, Soon-Gyu;Choi, Kyoon;Kim, Byung-Ik;Hwang, Jin-Ha
    • Journal of the Korean Ceramic Society
    • /
    • v.43 no.4 s.287
    • /
    • pp.230-234
    • /
    • 2006
  • Metal-Induced Crystallization (MIC) of amorphous silicon (a-Si) using aluminum and nickel as catalysts were performed with a variation of metal thickness and temperature. Raman results showed that the crystallization of a-Si depended on the thickness of aluminum while not on nickel. Nickel that forms silicide nodules during annealing simply catalyzed the formation of crystalline silicon (c-Si) while aluminum was consumed and transferred during MIC, which resulted in more complex microstructural characteristics. Crystalline silicons after NIC had elongated shape with a twin along the long axis. Morphological change after Aluminum-Induced Crystallization (AIC) showed more equiaxial grains. The nucleation and growth mechanism of AIC was discussed.

Size-controlled Growth of Fe Nanoparticles in Gas Flow Sputtering Process

  • Sakuma, H.;Aoshima, H.;Ishii, K.
    • Journal of Magnetics
    • /
    • v.11 no.3
    • /
    • pp.103-107
    • /
    • 2006
  • In grain oriented electrical steel process, hot band annealing has thought to be essential for obtaining good magnetic properties. New hot rolling method of heavy reduction in early hot rolling stage was applied to obtain good magnetic properties in GO process without hot band annealing. Hot rolling was carried out by varyinghot rolling reduction distribution along hot rolling pass. The heavy hot rolling reduction in rear stand improves the magnetic flux density in the case of no hot band annealing. The hot band specimens of the heavy reduction in front stand shows the elongated hot deformed microstructures in the center layer and strong {001}<110> texture.On the contrary, the heavily reduced specimens in rear stand shows the recrystallization in the center layer of hot band and strong {111}<112> and {110}<001> textures.

Copper(II) Complex of a Di-N-hydroxyethylated Tetraaza Macrocycle (Di-N-hydroxyethylated Tetraaza 거대고리 Copper(II) 착물)

  • 최기영;김용선;류해일;서일환;추금홍
    • Korean Journal of Crystallography
    • /
    • v.11 no.3
    • /
    • pp.147-150
    • /
    • 2000
  • The complex [CuL}Cl₂·3H₂O(1)(L=2,13-bis(2-hydroxyethyl)-5,16-dimethyl-2,6,13,17-tetraazatricyclo[14,4,0/sup 1.18/,0/sup 7.12/] docosane) has been synthesized and characterized by X-ray crystallography. 1. crystallized in the monoclinic, space group C2/c, with a=21.647(6)Å, b=8.549(1)Å, c=18.132(5)Å, β=118.58(2)°, V=2946.8(12)ų, Z=4, R₁(wR₂) for 2374observed reflections of [I>2σ(I)] was 0.052(0.187). The centrosymmetric complex 1 has an axially elongated octahedral geometry with four secondary and tertially amines of the macrocycle and tow oxygen atoms of the pendant hydroxyethyl groups.

  • PDF

Redescription of the Free-living Marine Nematode Species, Draconema japonicum Kito, 1976 (Nematoda: Draconematidae), by Scanning Electron Microscopy

  • Rho, Hyun-Soo;Kim, Won
    • Animal cells and systems
    • /
    • v.8 no.4
    • /
    • pp.235-245
    • /
    • 2004
  • Numerous specimens of adults and juveniles of Draconema japonicum Kito, 1976 have been found in intertidal and subtidal sediments and various algae around coast of South Korea. Draconema japonicum is recognized by the following characteristics: having an elongated loop-shaped amphideal fovea in male and horseshoe-shaped amphideal fovea in female, two pairs of uniformly tapered sublateral anal setae and two pairs of unevenly tapered subventral anal setae in male, eight to ten pairs in male and 13 to 15 pairs in female of posterior sublateral adhesion tubes, and five to six pairs of somatic setae on non-striated tail region. Scanning electron photomicrographs of the species are presented with a detailed morphological description and a key to the species of the genus Draconema Cobb, 1913. This is the first discovery of D. japonicum outside the Japanese waters.

Origin and Development of Fascicular Cambium in Hypocotyl of Eucommia ulmoides Seedlings (두충나무 유식물의 하배축에서의 유관속내 형성층의 기원 및 발생)

  • 강재선
    • Journal of Plant Biology
    • /
    • v.36 no.3
    • /
    • pp.275-279
    • /
    • 1993
  • The early ontogeny of the vascular cambium in the hypocotyl of Eucommia ulmoides seedling was studied anatomically. In transverse view, the procambial cells repeated periclinal divisions and then gradually differentiated into vascular cambium; however, in the transectional plane, it was difficult to reveal the origin of cambial initials. In tangential view, the early procambial cells repeated periclinal divisions and then the procambium consisted of homogeneous short cells. Some cells in late procambium did not show transverse divisions, but elongated continuously. Thus, the procambium showed a heterogeneous structure: The long cells became fusiform initials with tapering end walls and the short cells differentiated into ray initials. Conclusively, the two types of cambial initials were gradually originated from the homogeneous cells at the early procambial stage, and they consisted vascular cambium.

  • PDF

Studies on Sclerotium Formation in Curvularia Species

  • Singh, U.P.;Singh, S.K.;Sugawara, Koya;Srivastava, J.S.;Sarma, B.K.;Prithiviraj, B.
    • Mycobiology
    • /
    • v.29 no.3
    • /
    • pp.154-159
    • /
    • 2001
  • Natural sclerotium formation in two species of Curvularia was observed. The sclerotia were spherical to elongated. The scanning electron microscopical observations of sclerotia revealed that the sclerotia were of two distinct layers of cells, outer loosely woven hyphae and inner contact layer of cells. Different lights, viz. red, blue, green, fluorescent or addition of culture filtrate of Sclerotium rolfsii in the medium did not affect sclerotium formation.

  • PDF

Notes on Three Species of the Genus Euphoriomyces (Laboulbeniales) from Korea

  • Lee, Yong-Bo;Na, Young-Hee;Jang, In-Hoa;Lim, Chae-Kyu;Yang, Young-Ki
    • Mycobiology
    • /
    • v.35 no.1
    • /
    • pp.1-5
    • /
    • 2007
  • Three species of the genus Euphoriomyces (Laboulbeniales) were found newly from Korea. E. agathidii (Maire) Tavales was collected from Agathidium sp. (Leiodidae, Coleoptera). The characteristic traits of this species are the distal portion of the primary axis composed of $5{\sim}11$ superposed layers and bearing more or less the elongated appendages. E. cybocephali (Thaxter) Thaxter was collected from Pseudocolenis hilleri Reitter (Leiodidae, Coleoptera). The primary axis of this species composed of $5{\sim}9$ superposed layers is simple, not branched and a single antheridium occurs on the apex of the secondary axis. E. sugiyamae Majewski was collected from Scaphisoma rufum Achard (Scaphidiidae, Coleoptera). This species is very unique in having the antheridia formed as coner cells with lateral necks.