• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.219-220
• /
• 2006

Laser surface hardening technologies have been used to improve characteristics of wear and to enhance the fatigue resistance for mold parts. The objective of this research work is to investigate the influence of the process parameters, such as power of laser and defocused spot position, on the characteristics of laser surface hardening for the case of SKD61 steel. CW Nd:YAG laser is selected as the heat source. The optical lens with the elliptical profile is designed to obtain a wide surface hardening area with a uniform hardness. From the results of the experiments, it has been shown that the maximum hardness is approximatly 740 Hv when the power, focal position and the travel of laser are 1,095 W, +1mm and 0.3 m/min, respectively. In addition, the hardening width using the elliptical lens was three time larger than that using the defocusing of laser beam.

• 한국정밀공학회지
• /
• 제23권7호
• /
• pp.39-50
• /
• 2006

Laser heat treatment technologies have been used to improve characteristics of wear and to enhance the fatigue resistance for automotive parts. The bjective of this research work is to investigate the influence of the process parameters, such as power of laser and defocused spot position, on the characteristics of laser heat treatment for the case of SM45C medium carbon steel. CW Nd:YAG laser is selected as the heat source. The optical lens with the elliptical profile is designed to obtain a wide heat treatment area with a uniform hardness. From the results of the experiments, it has been shown that the maximum hardness is approximatly 780 Hv when the power and the travel of laser are 1,095 W and 0.6 m/min, respectively. In addition, the hardening width using the elliptical lens was three time larger than that using the defocusing of laser beam.

• 한국정밀공학회지
• /
• 제24권4호
• /
• pp.57-67
• /
• 2007

Laser surface hardening technologies have been used to improve characteristics of wear and to enhance the fatigue resistance fur mold parts. The objective of this research work is to investigate the influence of the process parameters, such as power of laser and defocused spot position, on the characteristics of laser surface hardening for the case of SKD61 steel. CW Nd:YAG laser is selected as the heat source. The optical lens with the elliptical profile is designed to obtain a wide surface hardening area with a uniform hardness. From the results of the experiments, it has been shown that the maximum average hardness is approximatly 780 Hv when the power, focal position and the travel of laser are 1,095 W, 0mm and 0.3 m/min, respectively. In samples treated with lower scanning speeds, some small carbide particles appear in the interdendritic regions. This region contains fine martensite and carbide in proportions which depend on the local thermal cycle.

• 대한수의학회지
• /
• 제35권1호
• /
• pp.45-54
• /
• 1995

Pancreatic endocrine cells containing glucagon, insulin, somatostatin and pancreatic polypeptide were identified in the pancreas of the Korean native goat by using immunohistochemical method. Glucagon immunoreative cells were oval or fusiform in shape and located at the periphery of the pancreatic islets. Insulin immunoreactive cells were round or oval in shape and occupied throughout the pancreatic islets except the small area of the periphery. Somatostatin immunoreative cells were oval and elliptical, and mainly located at the periphery of the pancreatic islets. Some of these cells had a cytoplasmic process. Pancreatic polypeptide immunoreactive cells were elliptical or polyhedral and located at the periphery of the pancratic islets where two or more cells formed a cell cluster. The distribution rates of glucagon, insulin, somatostatin and pancreatic polypeptide immunoreactive cells were 24.4%, 44.3%, 13.2% and 18.1% respectively.

• 치과방사선
• /
• 제25권2호
• /
• pp.501-511
• /
• 1995

The purpose of this study was to evaluate the position and shape of mental foramen in periapical radiographs. For this study, periapical radiographs of premolar areas were obtained from the 200 adults. Accordingly, the positional and shape changes of mental foramen were evaluated. The authors obtained radiographs according to changes in radiation beam direction in periapical radiographs of premolar areas, and then evaluated the positional and shape changes of mental foramen. The following results were obtained: 1. Shapes of mental foramen were observed elliptical(34.3％), round or oval(28.0％), unidentified(25.5％) and diffuse(12.2％) type in descending order of frequency. 2. Horizontal positions of mental foramen were most frequently observed at the 2nd premolar area(55.3％), the area between the 1st premolar and 2nd premolar(39.6％), the area between the 2nd premolar and 1st molar(3.4％), the 1st premolar area(1.0％), the area between the canine and 1st premolar(0.7％) in descending order of frequency. 3. Vertical positions of mental foramen were most frequently observed at the inferior to apex(67.1％), and at apex(24.8％), overlap with apex(6.4％), superior to apex(1.7％) in descending order of frequency. 4. Shapes of mental foramen were more obviously observed at the upward 10° positioned periapical radiographs. And according to the changes of horizontal and vertical position, they were observed similar to normally positioned periapical radiographs.

• 한국분무공학회지
• /
• 제22권3호
• /
• pp.146-152
• /
• 2017

An experimental study was carried out to investigate the spray characteristics of non-circular effervescent twin-fluid nozzles. For this purpose, two types of non-circular nozzles (E1, E2) and circular nozzle (C) were used. Three types of aerorators with hole diameters of 1.2, 1.7 and 2.1 mm were used. Each aerorator has a total of 12 holes. It is defined by area ratio which is ratio of exit orifice area and aerator hole area. Experiments were carried out by controlling the amount of air flowing after fixing the flow rate of the liquid, and the nozzle internal pressure and SMD were measured, and the jet image was taken from the nozzles. The discharge coefficients of the three kinds of nozzles were compared with the used in plain orifice's equation and the Jedelsky's equation, and the Jedelsky's equation was found to be about 3 times larger. In addition, empirical formula based on ALR, which is the largest variable in Jedelsky's equation, was derived. The droplet sizes(SMD) were found to be smaller in the non-circular shape than in the circular shape, which is concluded to be caused by the difference of the discharge coefficients.

• ALGAE
• /
• 제27권4호
• /
• pp.235-247
• /
• 2012

Regardless of continuous researches, recent researches on the genus Eucampia (Bacillariophyceae) have focused mainly on E. zodiacus f. zodiacus In the present study, species of the genus Eucampia have been studied based on their morphological characteristics. Eucampia species were collected at 24 sites from July 2008 to June 2011 in Korean coastal waters. Species were mainly identified based on the shape of valve, ocellus, and aperture, along with the length and shape of the bipolar elevations. As a result, five Eucampia species were identified: Eucampia cornuta, E. groenlandica, E. zodiacus f. zodiacus, E. zodiacus f. cylindrocornis, and E. zodiacus var. cornigera. E. cornuta and E. groenlandica have long pervalvar axis length, but the others display short or moderate length. Ocellus shape of E. cornuta, E. groenlandica and E. zodiacus f. cylindrocornis are linear ribs, whereas E. zodiacus f. zodiacus and E. zodiacus var. cornigera have radial ribs with central area. E. cornuta and E. zodiacus f. cylindrocornis have long and narrow cylindrical elevations. E. groenlandica and E. zodiacus f. zodiacus have short and broad elevations with blunt tips. E. zodiacus var. cornigera has long and broad conical elevations. In terms of aperture shape, E. cornuta has large elliptical form, E. groenlandica has almost circular to rounded rectangular form, E. zodiacus f. zodiacus has narrow and elliptical rounded rectangular to a narrow lanceolate form, E. zodiacus f. cylindrocornis has almost rectangular form, and E. zodiacus var. cornigera has rounded rhombic form. On the basis of elevations in broad girdle view, 5 Eucampia taxa could be divided into 3 types: 'narrow H type', E. cornuta and E. groenlandica; 'regular H type', E. zodiacus f. cylindrocornis and E. zodiacus var. cornigera (partial); 'wide H type', E. zodiacus f. zodiacus (almost).

• 한국컴퓨터정보학회논문지
• /
• 제13권4호
• /
• pp.97-103
• /
• 2008

이 논문은 응급상황을 인식하기 위하여 어안렌즈를 통해 획득된 영상을 이용하여 기절 동작을 인식하는 방법을 제안한다. 거실의 천장 중앙에 위치한 어안렌즈(fish-eye lens)를 장착한 카메라로부터 영상을 입력 받은 뒤, 가우시안 혼합 모델 기반의 적응적 배경 모델링 방법을 이용하여 전경 픽셀을 추출한다. 그리고 연결되어 있는 전경픽셀 영역들의 외곽점들을 추적하여 타원으로 매핑한다. 이 타원을 추적하면서 어안 렌즈 영상을 투시 영상으로 변환한 다음 타원의 크기 변화, 위치 변화, 이동 속도정보를 추출하여 이동과 정지 및 움직임이 기절동작과 유사한지를 판단한다. 실험 결과 어안 렌즈 영상을 그대로 사용하는 것보다 투시 영상으로 변환하여 타원의 크기변화, 위치변화, 이동속도 정보를 추출하는 방법이 보다 높은 인식률을 보였다.

• 소성∙가공
• /
• 제7권4호
• /
• pp.340-346
• /
• 1998

A kinematically admissible velocity field is developed for the analysis of twisting of the extruded products with elliptical shapes from round billet. The twisting of extruded product is caused by the lin-early increased rotational velocity from the center on the cross-section of the workpiece at the die exit. In the analysis the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is zero at the die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product in creases with the die twisting angle, the aspect ratio of product the friction condition, the reduction of area, and decreases with the die length.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.210-213
• /
• 1998

A kinematically admissible velocity field is developed for the analysis of twisting of extruded products. The twisting of extruded product is caused by the linearly increased rotational velocity from the center on the cross-section of the workpiece at the die exit. In the analysis, the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is zero at the die entrance and is increased linearly by axial distance from die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product increase with the die twisting angle and the aspect ratio of product and friction condition and reduction area and show that angular velocity increases with the decreases in die length.