• Animal Systematics, Evolution and Diversity
• /
• v.28 no.3
• /
• pp.168-177
• /
• 2012

Two stichotrichid ciliates, collected from marine waters in Jeju Island, were identified as Afroamphisiella multinucleata Foissner et al., 2002 and Pseudokahliella marina (Foissner et al., 1982) Berger et al., 1985. They are recorded for the first time in Korea. The descriptions are based on examinations of living as well as protargol-impregnated specimens. These species are characterized as follows. Afroamphisiella multinucleata has a body size in vivo of $70-95{\times}20-35{\mu}m$; elongate rectangular in shape; contractile vacuole located slightly above mid-body. The adoral zone is bipartited into 3 distal and 13-17 proximal membranelles and occupies 28-35% of the body length. The frontal row comprises 1-4 cirri and one buccal cirrus. The amphisiellid median cirral row is composed of 14-21 cirri, 10-19 left marginal cirri, and 21-30 right marginal cirri. Cortical granules are yellowish. 11-20 globular/ellipsoidal macronuclear nodules arrange proximally along the cell margins. Pseudokahliella marina has a body size in vivo of $110-195{\times}40-110{\mu}m$ and broadly elliptical in shape. The adoral zone of the membranelles occupies 50-60% of the body length, and is composed of 41-70 membranelles. A prominent frontal scutum is present. The contractile vacuole is located below the mid-body. There are 11-13 frontoventral rows, including marginal rows. Caudal cirri and transverse cirri are absent. Three invariable non-fragmented bipolar dorsal kineties are present. The left and right marginal rows are composed of 22-35 and 28-40 cirri, respectively. Colourless cortical granules are present. 8-11 spherical/ellipsoidal macronuclear nodules are connected with each other by thread-like tructures, forming an inverted C-shape.

• Korean Journal of Optics and Photonics
• /
• v.21 no.6
• /
• pp.254-258
• /
• 2010

We investigate an optical technique for beam shaping and optical amplification of a pulsed laser diode without variation of its original properties, such as repetition rate and pulse duration. The horizontal and longitudinal sizes of the pulsed laser diode are 300 and $2{\mu}m$, respectively, and its output power is $1.1mW/cm^2$. The multimodal and elliptical pulse shape of the laser diode is converted to the single-modal and Gaussian pulse shape by using a lensed optical fiber. Since the single-modal lensed fiber coupling from the multimodal pulsed laser diode degrades the output power severely, the output power of the pulsed laser diode is dramatically enhanced by using an optical amplification method based on master oscillated power amplification (MOPA). The pulse qualities of the laser diode are not changed after amplifying the pulse power and the output power was finally measured to be $29mW/cm^2$.

• Korean Journal of Plant Resources
• /
• v.16 no.2
• /
• pp.147-154
• /
• 2003

Agronomic characters of the 361 Korean adzuki beans(Vigna angularis (Willd.) Ohwi & Ohashi) collected in Korea were examined. Korean adzuki beans had predominantly up right growth habit types, followed by the intermediate types (15.3%) and the climbing types (6.9%). Round leaf type was the majority among the collections and followed by elliptical and xiphoid leaf type. Adzuki beans with yellow, light yellow and dark yellow flowers were 89.5％, 9.4％ and 1.1％, respectively. The 60.6% of the collections had red seeds and 26.9% had gray seeds. And collections with green seeds, white seeds mixed with gray spot, brown spots on red seeds, black spots on red seeds and dark gray spots on black seeds were also observed. Korean adzuki beans whose number of days from planting to flowering were 69∼75 days were the majority among 361 Korean adzuki beans. The number of days from flowering to majority were 41∼50 days and the number of days from planting to maturity were 111-120days. Adzuki beans having the stem length of 41-60 cm, the pod number per plant of 16-20 and the 100 seed weight of 8∼10 g were 50.2％, 40.2% and 30.5％ of collections, respectively.

• Journal of Magnetics
• /
• v.3 no.2
• /
• pp.44-48
• /
• 1998

Scanning Electron Microscopy with Polarization Analysis (SEMPA) was used to image the surface magnetic domain structure of the 100 ${\mu}{\textrm}{m}$ thick 3% Si-Fe sheet. The thin-gauged 3% Si-Fe strips with magnetic induction ($B_{10}$) from 1.98 to 1.57 Tesla were prepared via conventional metallurgical processes including melting, hot-and cold-rolling, intermediate annealing and final annealing. Using SEMPA, it was observed that the $B_{10}$ (1.98 T) Tesla sample was almost composed of 180$^{\circ}$ stripe domains which are parallel to rolling direction. On the other hand the 3% Si-Fe sheet with $B_{10}$ (1.57 T) Tesla was composed of large 180$^{\circ}$stripe domains that are slanted about 30$^{\circ}$to the rolling direction and complex magnetic domain structures like tree and zigzag pattern. The 180$^{\circ}$stripe domains, which covered a major part of the sample, had (110)<001> Goss texture parallel to the rolling direction. The domain walls between 180$^{\circ}$stripe domains were the conventional Bloch type walls. On the other hand, the 90$^{\circ}$domains, which covered minor part on edge of the sample, were observed in (200) grains. The domain walls between 90$^{\circ}$domains were the Neel type walls. In high magnification, the elliptical singularity at the Neel walls was clearly observed.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.7
• /
• pp.37-45
• /
• 2013

Context dependent fusion (CDF) is a fusion algorithm that combines multiple outputs from different classifiers to achieve better performance. CDF tries to divide the problem context into several homogeneous sub-contexts and to fuse data locally with respect to each sub-context. CDF showed better performance than existing methods, however, it is sensitive to noise due to the large number of parameters optimized and the innate linearity limits the application of CDF. In this paper, a variant of CDF using support vector machines (SVMs) for fusion and kernel principal component analysis (K-PCA) for context extraction is proposed to solve the problems in CDF, named CDF-SVM. Kernel PCA can shape irregular clusters including elliptical ones through the non-linear kernel transformation and SVM can draw a non-linear decision boundary. Regularization terms is also included in the objective function of CDF-SVM to mitigate the noise sensitivity in CDF. CDF-SVM showed better performance than CDF and its variants, which is demonstrated through the experiments with a landmine data set.

• Journal of the Korean Geographical Society
• /
• v.39 no.4
• /
• pp.528-543
• /
• 2004

The biogeographical approach on the species composition, distributional range, and life form of native Korean conifers suggests that the Korean Peninsula harbors 4 families 10 genera 30 species. Early-evolved conifers maintain high species diversity and broad distribution. During the glacial periods, the ranges of cold-tolerant conifers expanded, on the other hand, those of warmth-tolerant ones reduced. Presence of endemic subalpine conifers might be the result of long-term isolation of conifers on high mountains. Horizontal and vertical ranges of native Korean conifers are classified into alpine, subalpine, montane, coastal, insular and disjunctive types, and then subdivided into twelve sub-types. Typical life form of native Korean conifers is evergreen tree, blooms in spring, and fruits ripe in autumn or following autumn. Oval and elliptical seeds with wing might be beneficial for their dispersal. Further works on the migration, dispersal, genetics, ecology of native Korean conifers are required for the better understanding of the biogeography of conifers.

• Journal of the Korean Home Economics Association
• /
• v.27 no.1
• /
• pp.39-46
• /
• 1989

Mung bean starch gel (Mook) and gel made from starch of cowpea are similar properties in texture. In order to elucidate the similarity between these two starch gels, some physicochemical properties of cowpea starch were compared with those of mung bean starch. Water bildings capacity of cowpea starch (183.6%) was a little low than that of mung bean starch (184.2%). The solobility, swelling power and optical transmitance of the cowpea starch showed a smiliar pattern to mung bean starch, but cowpea starch had a little lower solubility than mung bean starch. Amylogram of mung bean strach (4, 5, 6, 7%) shoved no peak viscosity but cowpea starch (4, 5, 6%) showed peak viscosity and both starches showed high viscosities when cooling. Cowpea and mung bean starches had the blue value of 0.41 and 0.47, the alkali number of 8.4 and 8.0, the amylose content of 30.5 and 32.1%, the molecular weight of amylose of 30,000 adn 29,258 and glucose unit per segment of amylopectin of 27.6 and 26.8 respectively. The shape of cowpea and mung bean strach granules were round and elliptical, and the mean vlalue of major axis, minor axis and the ratio of these were 20.7 and 21.8 ${\mu}{\textrm}{m}$, 14.6 and 14.4 ${\mu}{\textrm}{m}$ and 1.42 and 1.51, respectively. The extent of retrogradation determined by the glucoamylase digestion method and syneresis showed that cowpea starch gel was larger than that syneresis showed than cowpea starch gel was larger than that of mung bean starch gel. The redults of X-ray diffraction studies showed A pattern for two starches, Diffraction peak of gels disappeared with gelatinization of starches but that of two starch gels storaged for 2 days at 5$^{\circ}C$ showed a similar patterm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.81-88
• /
• 2011

This paper presents a design of spiral antenna with broad bandwidth for non-linear junction detector(NLJD). An elliptical patch as radiating element located on center position of radiating surface, as well as the spiral elements on radiating surface was designed for broad bandwidth of spiral antenna. An antenna ground structure generating the multi resonance by spiral slit inserted on ground surface was also proposed. In order to realize high directivity and high gain of the proposed antenna, the cavity wall made of Fr4-epoxy and the metal cap were considered in design. As a result, the calculated gain of antenna with metal cap was improved about 3 dB with comparison of antenna without metal cap and the measured main beam directivity toward -z axis direction agreed well with calculation result. The measured axial ratio satisfied the circular polarization within -z axis ${\pm}45^{\circ}$ at design frequency bands and showed reasonable agreement with prediction.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.201-201
• /
• 2008

박형초음파모터의 구조는 그림 1(a) 와 같이 크로스형태의 앓은 스테이터에 윗면과 아랫면에 각각 8 개의 압전세라믹이 부착된 형태이다. 압전세라믹의 분극방향은 로터와 접촉하는 스테이터의 A, B, C, D 네 개의 타점에서 순차적인 타원변위가 생성되도록 결정된다. 유한요소해석프로그램인 ATILA 5.2.4를 사용하여 최적설계를 한 결과 폭 3[mm], 길이 18[mm], 두께 1.8[mm], Brass 재질, Mid surface clamp 조건에서 입력전압 18[Vrms] 일 때 0.3[${\mu}m$]의 변위를 보였다. 최적설계된 모델을 제작하였고, 정확한 실험결과를 얻기 위해서 푸쉬풀게이지, x-y스테이지, rpm 메타, 토크게이지를 이용하여 실험테이블을 구성하였다. 그림 1(b) 는 마이크로컨트롤러를 이용한 구동 드라이버를 보여준다. 한 주기에서 1/4분주의 순차적인 네 개의 구형파를 생성하고, 이를 push-pull회로를 동하여 90도의 위상차가 나는 정현파를 생성하여 초음파 모터의 구동전원으로 사용한다. 엔코더와 AD 컨버터를 이용하여 정속도 운전을 위한 피드백 제어가 된다. 제안된 구동드라이버를 이용하여 측정한 결과, 구동 주파수 88.6[kHz], 입력전압 [40Vrms], preload 0.2 [N]에서 130 [rmp] 의 속도와 25 [gfcm] 의 토크특성을 보였다. 압력전압을 증가시킬수록 속도는 선형적인 증가를 보였고, 토크는 이와 반대로 감소하는 특성을 보였다. 피드백 제어회로가 없는 경우에는 preload 변화에 따른 극심한 속도 변화를 보였고, 피드백 제어를 하였을 경우에는 0.2~0.4[N]의 범위에서 정속도 운전이 가능함을 확인하였다. 기존의 주파수발생기와 파워 엠프를 이용한 구동장비와의 특성비교에서도 큰 차이를 보이지 않았으며, 장시간의 운전에도 안정적인 구동이 가능함을 확인하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.3
• /
• pp.9-18
• /
• 1999

In this study, Metallugical properties between Sn-3.5Ag, Sn-37Pb eutectic solders and Au/Ni/cu substrate according to time span above the melting point were investigated. A conventional reflow soldering machine wert used for this study and time span above the melting point was determined by changing peak soldering temperature and conveyor speed. As results, scallop type intermetallic compounds of $Ni_3Sn_4$ were formed at joint interface and no Cu-Sn compounds were found at all; Ni layer performed as a barrier for Cu diffusion. As the peak soldering temperature increased, thickness of the intermetallic compound layer increased; maximum thickness of the scallop-layer was 2.2$\mu\textrm{m}$. The shape of scallops were transformed from hemi-sphere type to elliptical shape with smaller size. Micro-hardness of the solder joint decreased as the eutectic structure of Sn-3.5Ag and Sn-37Pb increased.