• Research in Plant Disease
• /
• v.16 no.1
• /
• pp.86-89
• /
• 2010

Brown leaf spot caused by Phyllosticta cruenta from 2007 to 2009 occurred severely in an herbs exhibition on Doonggulle (Polygonatum odoratum) at Gangju pond in Jeongchon-myon, Jinju city, Gyeongnam province, Korea. The typical symptoms of this disease were appeared on the brown leaf spot of leaves. Lesions on the leaves were appeared elliptical or irregular with 2~8 mm in size. Infected leaves were wilted, blighted and eventually died. Pycnidiospores and pycnidia of the fungus were abundantly formed on PDA. The optimum temperature for mycelial growth was $20{\sim}{25^{\circ}C}$. Pycnidiospores were not readily formed on PDA, colorless in color, globose~subglobose in shape, $10{\sim}18{\times}5{\sim}12{\mu}m$ in size and appendage hanged $4{\sim}15{\mu}m$ in size. Pycnidia were globose~subglobose in shape, dark brown in color and $60{\sim}162{\times}70{\sim}174{\mu}m$ in size. On the basis of mycological characteristics and pathogenicity test on host plants, the fungus was identified as Phyllosticta cruenta (Kunze: Fries) Kickx. This is the first report on the brown leaf spot of Doonggulle caused by P. cruenta in Korea.

• Parasites, Hosts and Diseases
• /
• v.29 no.2
• /
• pp.161-172
• /
• 1991

The complete life cycle of Echinostoma hertense has been maintained in the laboratory, using Lymnaea persia snails and Rana nigromaculata tadpoles as the first and second intermediate hosts. ICR mice was used as the definitive host. Within the egg of 5. hotense, the miracidium was fully matured in 13 days of incubation at $29~30^{\circ}C$. The miracidium was $93.8{\times}53.6{\;}{\mu\textrm{m}}$ in average size, covered with numerous cilia of $7~11{\;}{\mu\textrm{m}}$ length. The epidermal plates were arranged in 6-8-4-2 formula. The first generation rediae ($1.19{\times}0.27{\;}mm$ in average size) were observed in 14 days after miracidial challenge to the snails, and the second generation rediae ($1.40{\times}0.26{\;}mm$ in average size) in 30 days. The average sixte of the cercaria was $295.5{\times}145.0{\;}{\mu\textrm{m}}$. Their head crown was poorly developed, and collar spines were not yet observed. After a cercarial challenge to the tadpoles, all of the tadpoles became infected and the average worm recovery rate was 88.5%. The majority of the metacercariae (75.5%) were recovered from the muscle of the tadpole's posterior body and the rest (24.3%) from their gills. The metacercariae from the tadpoles were elliptical, and $167.7{\times}129.9{\;}{\mu\textrm{m}}$ in average size. The recovery rate of adults from the mice was difFerent by the age of the metacercariae grown in the tadpoles. The metacercariae younger than 5 hrs could not infect mice whereas those older than 6 hrs could infect mice. The recovery rate became higher as the metacercaria matured, with the peak recovery rate of 90.0 % at the metacercarial age of 9 days. Thereafter the recovery rate decreased to 55.0% at the age of 50 days. As shown by the above results, the whole life cycle of E. hcrtense has been completed in the laboratory. At least 55~58 days were required to maintain one egg-to-egg cycle of E. hortense.

• Korean Journal of Veterinary Research
• /
• v.28 no.2
• /
• pp.379-385
• /
• 1988

For the comparison of surface fine structures in the proliferative forms of two major protoroan parasites, Toxoplasma gondii and Sarcocystis species in mammalian hosts, isolated from the artificially infected mice and from the naturally infected cattle, respectively, an SEM(Hitachi S-570) was applied to the fixed, dried and coated with gold ion on the microslide glasses. The tachyzoites of T gondii from the peritoneal cavity of the mouse showed the crescent-like feature and measured as $5.57{\mu}m$ in length and $2.33{\mu}m$ in width, while the bradyzoites of Sarcocystis species from the heart muscle of slaughtered cattle was banana-shaped and measured as $14.18{\mu}m$ in length and $2.85{\mu}m$ in width. On the surface of Sarcocystis species bradyzoite, a distinct elliptical micropore was identified in the high magnification observation of 60,000X, and it measured as $0.35{\mu}m$ in length and $0.18{\mu}m$ in width.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.2
• /
• pp.133-141
• /
• 2007

The excavation damaged zone (EDZ) is an area around an excavation where in situ rock mass properties, stress condition, displacement, groundwater flow conditions have been altered due to the processes induced by the excavation. Various studies have been carried out on EDZ, but most studies have focused on the mechanical bahavior of EDZ by in situ experiment. Even though the EDZ could potentially form a high permeable pathway of groundwater flow, only a few studies were performed on the analysis of groundwater flow in EDZ. In this study, the 'hydraulic EDZ' was defined as the rock zone adjacent to the excavation where the hydraulic aperture has been changed due to the excavation by using H-M coupling analysis. Fundamental principles of distinct element method (DEM) were used in the analysis. In the same groundwater level, the behavior of hydraulic aperture near the cavern was analyzed for different stress ratios, initial apertures, fracture angles and fracture spacings by using a two-dimensional DEM program. We evaluate the excavation induced hydraulic aperture change. Using the results of the study, hydraulic EDZ was defined as an elliptical shape model perpendicular to the joint.

• Progress in Medical Physics
• /
• v.12 no.1
• /
• pp.95-102
• /
• 2001

The intracavitary cones were designed which were made of stainless steel and have scratched inside cone to be generated electron scatter and designed to be attached easily to the LINAC collimator and controlled cones length to be contacted smoothly between the patient and the cone tip. Two types of intracavitary cones were designed. One is the straight end cones with circular opening on the distal end and the other is 30 degree beveled end cones with elliptical opening on the distal end. Each type of intracavitary cone ranged in daimeter from 2.5 cm to 3.5 cm and required a separate set of lower trimmer annulias cone diameter. The film phantom was designed with an internal cassette that accurately aligned the film edge with the film phantom surface. Film optical density data were measured by photodensitometer(Wellhofer 700i) Dosimetry measurements were made to commission the LINAC for 6 - 20 MeV electron using the intracavitary cones. Isodose curves were measured for all energy and cones combinations. Output is defined as the maximum dose per MU along the clinical central axis in water at 113 cm SSD. Calibration output, defined to be the output for the 15cm$\times$15cm diameter straight cone, was adjusted to 1.00 cGy/MU at each energy according to the TG-21 protocol.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.135-139
• /
• 2017

The main reason for heat accidents occurring at the after stern tube bearing (STB) is excessive local pressure caused by the deflection of the propulsion shaft due to propeller loads. The probability of a heat accident is increased by the low flexibility of the shaft system in very large crude oil carriers (VLCCs) as the engine power and shaft diameter increase and the distance decreases between the forward and after STBs. This study proposed shaft system with only an after STB and no forward STB for a flexibility acquisition method for a VLCC shaft system under hull deformation. A Hertzian contact condition was applied, which assumes a half-elliptical pressure distribution along the contact width for the calculation of the local squeeze pressure. The propeller loads, heat effect, and hull deflection under engine operating conditions are also considered. The results show that the required design criteria were satisfied by building a partial slope at the white metal, which is the material at the axial contact side in the after STB. This system could reduce building cost by simplification of the shaft system.

• Archives of Plastic Surgery
• /
• v.36 no.4
• /
• pp.512-515
• /
• 2009

Purpose: Neurofibromatosis(NF) is an autosomal - dominant systemic disease. Up to fifty percent of patients with NF are reported to have concomitant vascular abnormalities. In the resection of a larger NF, the risk of uncontrolled hemorrhage is much higher due to the difficulty of hemostasis of large vessels within the tumor. We ligated the base of the giant NF with a simple loop - shaped ligation before removal of the giant NF in both buttocks. And then we could successfully reduce the amount of hemorrhage during the operation. Methods: A 46 - year - old female patient presented for giant masses of both gluteal area, which has been growing slowly for the last ten years. Each mass was about $30{\times}20cm$ in size. After designing the elliptical resection margin, we tightened the tumor base by using continuous loop - shaped suture ligation(weaving the thread up and down in a loop - shaped pattern, leaving a space of 2 cm between each loop) with a straight needle and prolene 2 - 0. After skin incision, we proceeded the dissection toward the central and inferior side of the mass obliquely while we avoided breaking large vascular sinuses. We resected the tumor in a wedged - shape. Subcutaneous tissue was sutured layer by layer and skin was closed by vertical mattress and interrupted suture. The loop - shaped ligation of the base was removed and compressive dressing was done with gauzes and elastic bandages. Results: Postoperative complications such as infection, hemorrhage, hematoma, and dehiscense did not occur. Perioperatively the patient was sufficiently transfused with five units of blood and two units of fresh frozen plasma. During the subsequent 1 year follow - up, the functional and cosmetic result was excellent. Conclusion: A continuous loop - shaped suture ligation procedure along the base of the giant NF effectively reduced the amount of hemorrhage during the operation, made dissection and ligation of vessels easily and quickly, and shorten the operating time and postoperative recovery time.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.2 s.45
• /
• pp.111-122
• /
• 2000

In this study, A series of fatigue tests have been performed on the fillet welded joints of cover plates in steel plate girders in order to quantitatively assess the fatigue characteristics according to the shapes of cover plates. From the results of fatigue tests, it has been shown that the fatigue strengths were slightly different according to their shapes, but satisfied the fatigue design curves in Korea and other countries. Also, from the results of beachmark tests, it has been confirmed that the points of fatigue crack initiation were closely related to the shapes of weld bead toes, and fatigue cracks simultaneously initiated from several points in weld bead toes have been grown as semi-elliptical surface cracks, and these cracks have been coalesced each other, and grown as through thickness cracks, and finally reached to fracture. Besides, from the results of fracture mechanics approaches, stress gradient factors were the most dominant factors among crack correction factors obtained from the existing equations and finite element analysis, and the fatigue life on fillet welded joints of cover plates could be estimated using the relations between fatigue crack growth rate and stress intensity factor range obtained from finite element analysis.

• Parasites, Hosts and Diseases
• /
• v.50 no.3
• /
• pp.207-213
• /
• 2012

The egg morphology of minute intestinal flukes (MIF) that can occur as human infections in the Republic of Korea, i.e., Metagonimus yokogawai, M. miyatai, M. takahashii, Heterophyes nocens, Heterophyopsis continua, Stellantchasmus falcatus, Stictodora fuscata, Pygidiopsis summa, and Gymnophalloides seoi, was studied in comparison with Clonorchis sinensis. The adult worms were obtained from residents of endemic areas, and their intrauterine eggs were studied and measured using light microscopy; the length, width, length-width ratio (LWR), and Faust-Meleney index (FMI). Several specimens were processed for scanning electron microscopy (SEM), and before gold-coating, the uterine portion of each fluke was etched with a sharp pin in order to expose the eggs. The MIF eggs were ovoid, pyriform, or elliptical with a size range of $21-35{\times}12-21{\mu}m$. S. fuscata eggs revealed the highest FMI (largest in the area) and lowest LWR, whereas P. summa eggs showed the lowest FMI and medium LWR. SEM revealed that G. seoi and S. fuscata had remarkably clean shell surface lacking the muskmelon-like structure which is prominent in C. sinensis eggs. In Metagonimus spp., H. continua, H. nocens, and S. falcatus eggs, minute surface ridges were recognizable though less prominent compared with C. sinensis. On the surface of P. summa eggs, thread-like curly structures were characteristically seen. The results revealed that important differential keys for MIF eggs include the length, width, area (FMI), shape of the eggs, and the extent of the muskmelon-like structure or ridges on their shell surface and operculum.

• Journal of Plant Biotechnology
• /
• v.29 no.2
• /
• pp.129-134
• /
• 2002

194 plantlets regenerated from leaf explants of boxthorn 'Cheonyang' were cultivated to investigate their morphological characteristics in the field for 2 years. Based on the morphology of leaves, 66.1% of them had elliptical type leaf, the same as that of mother plants, while 22.2% in oval type, 7.2% in obovate type, 2.6% in long-obvate type and 2.1% in lanceolate type. They were classified to 4 groups; group A was selected with both high fruit size and fruit yield, group B with only high fruit size, group C with larger or thicken leaf, and group D with multiple brenches. In comparision of production efficiency between the selected groups and mother plants, group A (99741, 99781, 99854, 99870 and 99886) were longer (2.1 to 2.7 mm) in length of fruits and higher in fruit production (15 to 30%) as compared to mother plants. Croup D (99797 and 99892) was higher in leaf production (7.2%) as compared to boxthorn 'CL1-48', which is the highest in leaf production among boxthorn veriaties.