• 제목/요약/키워드: Ellipse

검색결과 453건 처리시간 0.022초

한국산(韓國産) 모래무지아과(亞科)(Gobioninae) 어류의 미설골(尾舌骨)에 대한 비교연구 (Comparative Study on the Urohyal of the Subfamily Gobioninae of Korea)

  • 김익수;강언종
    • 한국어류학회지
    • /
    • 제1권1_2호
    • /
    • pp.24-34
    • /
    • 1989
  • 외부형태를 근거로 구분되어 온 잉어과(科)(Cyprinidae)의 모래무지아과(亞科)(Gobioninae)어류는 아과(亞科)의 한계가 학자 간에 일치되지 않아 분류학적으로 문제된다. 본 연구는 이의 규명을 위해 한국산 모래무지아과(亞科) 어류(魚類) 14속(屬)에 대해 두골의 형질을 재검토하던 중 미설골(urohyal)의 형질이 뚜렷한 형질전이 상태를 보여 주목되었다. 한국산 모래무지아과(亞科) 어류는 미설골의 형질상태에 의해 다음과 같은 4개의 group으로 구분되었다. 1. Coreo leuciscus, Gnathopogon group ; 수평판의 형태는 후연이 쐐기모양으로 패인 원추형이고, 그 길이는 수직판보다 길다. 2. Squalidus, Hemibarbus group ; 수평판의 형태는 뒤로 갈수록 넓어지며 후연은 뾰죽하게 뻗은 긴 마름모꼴로, 그 길이는 수직판과 거의 같다. 3. Sarcocheilichthys, Pseudorasbora, Pseudopungtungia, Pungtungia group ; 수평판의 형태는 중앙부분이 매우 넓은 마름모꼴로, 그 길이는 수직판 보다 길고, 인대가 부착되는 선단은 2분지 되지 않으며, 중앙부분이 복면을 향해 굽어 있다. 4. Ladislavia, Gobiobotia, Abbottina, Hicrophysogobio, Pseudogobio, Saurogobio group ; 수평판의 형태는 뒤로 갈수록 가늘어지는 침상 혹은 넓은 쐐기모양으로, 그 길이는 수직판보다 짧고, 선단의 인대가 부착되는 부위는 배면으로 비후되었다. 이러한 결과는 adductor mandibulae complex와 geniohyoideus 등의 근육형질이나 두부 측선감각관 등의 형질에 의한 결과와도 일치되는 것으로 주목된다.

  • PDF

우리은하 구상성단들의 역학적 세부구조 I. M5 (DYNAMICAL SUBSTRUCTURES OF GALACTIC GLOBULAR CLUSTERS I. M5)

  • 이종환;손영종
    • Journal of Astronomy and Space Sciences
    • /
    • 제21권3호
    • /
    • pp.181-190
    • /
    • 2004
  • 구성상단 M5의 역학적 세부구조를 BV영상에 대한 점광원 측광과 타원 맞추기 표면 측광에 의한 타원률과 위치각의 변화로부터 알아보았다. 전체적으로 M5는 성단의 중심부로부터 거리에 대한 타원률과 위치각이 일정하지 않고 지속적으로 변화하고 있음을 알 수 있었다. 즉, M5의 중심으로부터 반광도 밝기($r_h$)의 약 3배에 이르기 까지, 타원률은 $0.005\~0.25$의 변화를 보이며, 위치각은 $75^{\circ}\~-75^{\circ}$의 변화를 나타낸다. 항성 종족 차이에 의한 역학적 세부구조의 변화에 있어서 M5의 $\~r_h$ 바깥 영역은 거성들의 종족 차이에 의한 효과느? 거의 없음을 알 수 있었다. 그러나 $\~0.5r_h$ 안쪽 영역에서는 매우 밝은 적색거성 또는 붉은 수평계열성들에 의한 역학적 세부구조의 변화가 나타나는데, 특히 매우 밝은 적색거성들에 의한 $\~0.5r_h$ 안쪽 영역에서 구상성단 M5의 역학적 세부구조의 변화는 전체 종족을 포함하는 M5의 역학적 구조에 비하여, 타원률의 경우 최대 약 0.1, 그리고 위치각의 경우 최대 약$100^{\circ}$에 이르는 비교적 큰 변화를 보임을 알 수 있었다.

E/H 평면 방사 패턴 대칭성 향상을 위해 개구면이 변형된 원형 이중 모드 혼 안테나 (Circular Dual Mode Horn Antenna(CDMHA) with Modified Aperture to Improve E/H-Plane Radiation Pattern Symmetry)

  • 김재식;윤지환;윤영중;이우상;소준호
    • 한국전자파학회논문지
    • /
    • 제24권5호
    • /
    • pp.502-507
    • /
    • 2013
  • 본 논문에서는 개구면이 큰 기존 원형 이중 모드 혼의 E/H 평면 방사 패턴 대칭성 향상을 위한 변형된 개구면을 갖는 원형 이중 모드 혼을 제안한다. 제안된 안테나는 급전부, 모드 발생부, 위상정합부로 구성되며, 이 중 위상정합부의 원형 개구면은 E/H 평면의 방사 패턴 대칭성 향상을 위해 타원형 혹은 직사각형으로 변이된 형상을 갖는다. 제안된 안테나와 기존 원형 이중 모드 혼의 성능 비교를 위해 15 GHz에서 동작하는 기존 원형 이중모드 혼과 직사각형 개구면을 갖는 원형 이중 모드 혼을 제작하고 분석하였다. 측정 결과, f/d 비가 1인 반사판 안테나의 최대 개구 효율을 위한 급전 혼의 빔 폭인 -11 dB 빔 폭($53^{\circ}$) 내에서 기존 원형 이중 모드 혼의 경우 3.394 dB의 E/H 평면 방사 패턴 차이를 갖는 반면, 제안된 안테나는 오직 0.539 dB 차이를 가진다.

복잡한 영상에 강인한 손동작 인식 방법 (Hand Gesture Recognition Algorithm Robust to Complex Image)

  • 박상윤;이응주
    • 한국멀티미디어학회논문지
    • /
    • 제13권7호
    • /
    • pp.1000-1015
    • /
    • 2010
  • 본 논문에서는 손동작 인식을 위한 새로운 방법을 제안한다. 손 추출을 위한 방법으로는 피부색과 boundary energy 정보를 이용하고 moment method로 손바닥의 중심을 구하게 된다. 손동작 인식은 두 단계로 나눌 수 있다. 첫 번째 단계는 손 형상 인식으로 병렬 신경망을 이용하였다. 손 형상의 패턴을 추출하기 위해서 fitting ellipses method를 이용하였다. fitting ellipses method는 추출된 손 영역을 12개의 타원형으로 분류하고 타원 외곽선의 흰 픽셀 비율을 계산한다. 패턴은 12개의 입력 노드로 신경망에 입력되고 4개의 출력 노드로 출력되는데 각 출력 노드는 0~1사이의 값을 갖게 된다. 손 형상은 4개의 출력 노드의 구성으로 나타낼 수 있다. 두 번째 단계는 손동작 추적과 인식이다. 손동작 추적과 인식을 위해서는 손동작의 위치 정보를 예측 할 수 있는 Kalman Filter를 이용하였다. 실험은 Windows XP상에서 수행되었고 제안한 알고리즘의 효율성을 평가하였다. 손 형상을 인식하기 위해서 300개의 이미지를 인식기에 훈련시키고 200개의 이미지를 실험에 사용하였다. 194개 이상의 이미지가 정확하게 인식 되었다. 그리고 손동작 추적 인식을 실험하기 위해서 1200번의 손동작(각 동작은 400번)을 사용하였고 그 중 1002번의 손동작이 정확하게 인식 되었다.이러한 결과는 제안된 방법이 손 영역을 추출하고 손 동작을 인식하는데 유용함을 확인 할 수 있었다.

아랫입술에 생긴 선천성 샛길 증례 (A Case of Congenital Midline Fistula of the Lower Lip)

  • 최환준;최임돈;최창용;김숙;김용배
    • Archives of Plastic Surgery
    • /
    • 제38권1호
    • /
    • pp.73-76
    • /
    • 2011
  • Purpose: Congenital midline upper lip sinus is a rare lesion. There are two postulates that can account for the formation of the upper lip sinus based on two major theories of the development of the face: the fusion theory and the merging theory. However, congenital midline lower lip sinus is very rarely reported and described. We report a case of a congenital midline sinus of the lower lip in a 6-year-old female. Methods: A 6-year-old girl presented with a nipple like swelling on the midline lower lip. Physical examination revealed about $5{\times}5$ mm protruding round mass with a just small opening that was non-tender to palpation. The mass was not associated with any skin changes. It umbilicated at the apex and contains a fistulous tract, discharging clear fluid. Only, simple radiologic finding shows bony spur on the lower one third of mandibular symphsis. Results: A small transverse ellipse is made around the opening and elevated mass with sharpe dissection. The tract is excised using the probe and dye as the guide. The tract was extended to periosteum of the lower one third of the mandible. The tract and involved periosteum were excised en bloc, and removed protrusion of the mandibular bone using diamond burr. Microscopic examination of the resected sinus revealed the fistulous tract itself, consisting of fibrous connective tissue covered with cornified stratified squamous epithelium, was observed in the center of the sample. In 6 months follow-up, This patient had a good result was obtained by the method of fistulectomy alone. Conclusion: Midline cranoifacial fistulas represent rare lesions resulting from abnormal fusion of embryologic structures. Our case report describes the excision of a congenital midline sinus of the lower lip in a 6-year-old female. This case represents the first report of a lower lip sinus presenting in a girl as a mass in the skin of the chin with extension to the midline of the mandible. However, the etiology of this rare congenital sinus remains obscure.

제주도에서 종자산포자로서 직박구리가 섭식하는 열매 현황 (The Status of Fruits Consumed by Brown-eared Bulbul (Hypsypetes amaurotis) as a Seed Dispersal Agent on Jeju Island)

  • 김은미;강창완;원현규;송국만;오미래
    • 한국환경복원기술학회지
    • /
    • 제18권1호
    • /
    • pp.53-69
    • /
    • 2015
  • Plants and birds have symbiotic relationship as the birds eat the fruits and disperse its seeds from the different places. Because Brown-eared Bulbul eats various fruits, We investigated the fruits consumed by Brown-eared Bulbul and the distribution of these seeds. Surveys were conducted at several area throughout Jeju Island at least twice a month from 2013 to 2014. We identified the fruits consumed by Brown-eared Bulbul through observation, pictures and interviews from the local residents. Results showed that this species consumed fruits from 82 plant species, belonging to 38 plant families. Thirty nine percent(39%) of these plant species belong to the Rosaceae, Lauraceae, Moraceae, Aquifoliaceae and Vitaceae and 33 species were classified as warm-temperate and subtropical plant which is 40% of the total plant species consumed. Two feeding types, which were gulper type and pecking type were observed for the Brown-eared Bulbul. It was also observed that this species preferred eating fruits of gulping type compared to that of pecking type. The average size of the fruits consumed through gulping was $8.92{\pm}3.41mm$ while it was $45.25{\pm}26.67mm$ for the pecker type. This bird species also consumed more fruits with globular shape compared to those of fruits with ellipse shape. For the fruit color, red and black-colored fruits were more preferred than yellow-colored fruits by Brown-eared Bulbul. Eaten frequency varied from 0.04 to 0.58 and the 10 fruits species were eaten frequently by Brown-eared Bulbul. This study would provide information for the role of Brown-eared Bulbul in the ecosystem as a seed dispersal agent.

제주도 연안 정치망 조업시스템 개발에 관한 연구 3. 구조개량을 위한 각멍어구 모형실험 (Studies on the Development of the Fishing System of Set Net in the Coast of Jeju Island 3. The Mode| Experiment of Fyke Net for Construction Improvement)

  • 김석종;구명성
    • 수산해양기술연구
    • /
    • 제40권1호
    • /
    • pp.37-46
    • /
    • 2004
  • 제주도 연안 정치망 조업 시스템 개량과 개발분야에서 연안해역에서 널리 사용되고 있는 각망어구의 구조개량을 위한 기초연구로서 현재 사용되고 있는 실물망을 1/20로 축소하여 개량된 입구 구조를 갖춘 모형 어구 8종류를 제작하고, 실험 수조에서 고등어 어군을 이용하여 모형 어구에 대한 어군의 입 ${\cdot}$ 출망 행동을 관찰 분석하였는데, 그 결과는 다음과 같다. 1. 원통그물내에서의 어군의 행동 패턴은 원형 모양으로 한쪽 원통그물내에 체류하는 행동과 긴 타원형 모양으로 좌 ${\cdot}$ 우 원통그물내를 왕복 유영하는 행동패턴으로 분류할 수 있었다. 2. 모형 어구 내에서의 고등어 어군의 평균 유영 속도는 원통 그물 중간 부분에서 24.9cm/sec, 오른쪽 원통그물내에서 12.6cm/sec, 입구에서 32.0cm/sec였다. 3. 어군의 입망율은 경과 시간 60초일 때 표준 모형 어구에서는 47%였고, 깔대기 그물이 길이가 35cm 의 모형 어구에서는 40%로 나타났는데, 양자의 차이는 7% 정도로 그다지 크지 않았다. 4. 어군의 출망율은 경과 시간 60초일 때 표준 모형 어구에서는 69%였고, 깔대기 그물의 길이가 35cm 의 모형 어구에서는 10%로 나타났는데, 양자의 차이는 59% 정도로 그 폭이 컸다. 5. 어군의 잔여율은 경과 시간 60초일 때 표준 모형 어구에서는 31%였고, 깔대기 그물의 길이가 35cm의 모형 어구에서는 90%로 나타났는데, 양자의 차이는 59% 정도였다.

주입선 및 열처리에 따른 IPS Empress 도재의 미세구조에 관한 연구 (A STUDY ON THE MICROSTRUCTURE OF IPS EMPRESS CERAMICS ACCORDING TO THE HEAT TREATMENT AND SPRUE TYPE)

  • 동진근;오상천
    • 대한치과보철학회지
    • /
    • 제36권5호
    • /
    • pp.772-785
    • /
    • 1998
  • This study was undertaken to clarify the microstructure of the different IPS Empress ingots by etching and to observe the change of leucite crystal structure according to subsequent heat treatment and the crystal distribution according to sprue types(${\phi}2.8mm$, single sprue; ${\phi}1.8mm$, double sprue) by scanning electron microscopy. IPS Empress T1, O1 ingots used for staining technique, and Dentin(A2) ingots used for layering technique were selected for this study. To observe the microstructures of these ingots before pressing, the specimens were prepared in splinters($3{\times}3{\times}3mm$) taken from the original ingots. And to estimate crystal distribution and microstructural change by sprue type and subsequent heat treatment. the specimens($3{\times}3{\times}3mm$) were heat-pressed through the two types of sprues with different diameters and numbers, and all specimens were fired according to the recommended firing schedule. The observed surface was ground with waterproof papers($#800{\sim}#1800$) on the grind polisher and was cleaned ultrasonically. All specimen were etched with 0.5% hydrofluoric acid. After etching, the surface was treated by ion sputter coating for SEM observation at an accelerating voltage of 20kV. In all specimens, the central area of ground surface was observed because there was less difference in microstructure between the peripheral area and the central area. The results were as follows ; 1. In the microstructure according to the ingot type, there was a wide difference between the staining (T1,O1) and layering(Dentin A2) ingots, but there was not a considerable difference between the T1 ingot and the O1 ingot for staining technique. 2. In all specimens, the crystal dispersion of IPS Empress ceramic using double sprue was significantly more scattered than that of IPS Empress ceramic using single sprue. The degree of scattering was strongest in the Dentin(A2) specimen and weakest in the O1 ingot. 3. In the microstructural change according to the subsequent heat treatment, all of ingots had some microcracks in the inside of the leucite crystal and the glass matrix after pressing. The inner splinters of the leucite crystal became smaller, and more microcracks occurred in the glass matrix due to increasing heat treatment times. 4. The size of leucite crystals varied from $1{\mu}m\;to\;5{\mu}m$. The mean size of mature crystals was about $5{\mu}m$. The form of the crystal was similar to a circle when it was smaller and similar to an ellipse when it was larger.

  • PDF

고해상도 SAR 영상 및 EO 영상을 이용한 표적군 검출 기법 개발 (Detection of Group of Targets Using High Resolution Satellite SAR and EO Images)

  • 김소연;김상완
    • 대한원격탐사학회지
    • /
    • 제31권2호
    • /
    • pp.111-125
    • /
    • 2015
  • 본 연구에서는 고해상도 위성영상인 TerraSAR-X와 WorldView-2 등을 융합하여 표적의 특성을 고려한 표적군(Group of targets) 검출을 수행하였다. 관심 대상으로 하는 표적은 고정되어 있으며, 군(Group)을 이루고 있는 특징이 있다. 표적 후보를 검출하기 위해 대상 물체의 레이더 후방산란 특성을 이용한 Constant False Alarm Rate (CFAR) 알고리즘을 적용하였다. 검출된 표적 후보군으로부터 비표적을 제거하기 위해 표적의 크기 정보를 이용한 화소 클러스터링, 표적군을 이루는 표적들간의 배치 특성을 이용한 네트워크 클러스터링. 그리고 SAR 간섭기법 적용이 가능한 간섭쌍이 있는 경우 긴밀도 정보를 이용하였다. 또한, 오경보(False Alarm)를 감소시키고 최종 표적을 결정하기 위해, 표적의 형태 정보를 추출할 수 있는 Electro-Optical (EO) 영상을 바탕으로 효과적인 타원 검출 기법을 개발하였다. 개발된 표적군 검출 알고리즘을 10개 지역에 적용한 결과, 표적군 검출율은 100%, 단일 표적에 대한 오경보율은 0.03~0.3개/$km^2$, 평균 오경보는 1.8군/$64km^2$로 낮은 오경보와 높은 검출율을 보이며 표적군이 검출되었다. 본 연구에서 개발된 표준화된 표적 검출 기법은 향후 무인화된 표적 검출 시스템 구축에 핵심적인 기술이 될 것으로 전망한다.

수치모델링 실험을 통한 서해 천수만의 조류와 조석잔차류 특성 (Characteristics of Tidal Current and Tidal Residual Current in the Chunsu Bay, Yellow Sea, Korea based on Numerical Modeling Experiments)

  • 정광영;노영재;김백진
    • 한국해안·해양공학회논문집
    • /
    • 제25권4호
    • /
    • pp.207-218
    • /
    • 2013
  • 수치 모델링 실험을 활용하여 서해 천수만의 해수 유동과 그 변화를 이해하기 위한 연구를 수행했다. 모델링 실험 결과에 대한 검증을 위해 관측 자료의 조위와 조류 각각 4대 분조의 진폭과 위상을 이용하여 스킬 분석을 실시했다. 그 결과 스킬 점수는 대부분 90%가 넘는 것으로 보아 수치 모델링 실험 결과는 관측된 조위와 조류가 양호하게 일치하는 것으로 나타났다. 천수만의 조석파는 만 입구에서 안쪽으로 진행되며 북부로 갈수록 조차는 점차 증가했다. 조석파가 북부까지 도달하는데 약 10~30분의 시간이 소요되었다. 남부에서 조석파는 반시계 방향으로 회전하는 특성을 보였다. 조류는 해저 지형을 따라 남-북 방향으로 흘렀으며, 장축의 각도는 등수심선과 나란히 나타났다. 조류타원의 단축이 장축의 10% 이하로 왕복성 조류의 특성을 보였다. 수심과 해안선 등 지형적 요인에 의해 좌우되는 조석잔차류의 크기는 1~30 cm/sec의 범위를 보였고, 남쪽 수로에서 컸으며 만의 북부에서는 작았다. 조석잔차류로부터 유도된 상대와도를 통해 수 백 m에서 수 km 크기로 시계/반시계 방향으로 회전하는 와류를 확인했고, 죽도 주변에서 2쌍, 남부에서 형성된 3~4쌍의 강한 와류 특성을 파악했다.